/*
 * Copyright (c) 2020 Piotr Mienkowski
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#include <zephyr/dt-bindings/input/input-event-codes.h>
#include "efr32-series1-common-pinctrl.dtsi"

/ {
	chosen {
		zephyr,console = &usart0;
		zephyr,shell-uart = &usart0;
		zephyr,sram = &sram0;
		zephyr,flash = &flash0;
		zephyr,code-partition = &slot0_partition;
	};

	/* These aliases are provided for compatibility with samples */
	aliases {
		led0 = &led0;
		led1 = &led1;
		sw0 = &button0;
		sw1 = &button1;
		watchdog0 = &wdog0;
	};

	leds {
		compatible = "gpio-leds";
		led0: led_0 {
			gpios = <&gpiof 4 0>;
			label = "LED 0";
		};
		led1: led_1 {
			gpios = <&gpiof 5 0>;
			label = "LED 1";
		};
	};

	buttons {
		compatible = "gpio-keys";
		button0: button_0 {
			/* gpio flags need validation */
			gpios = <&gpiof 6 GPIO_ACTIVE_LOW>;
			label = "User Push Button 0";
			zephyr,code = <INPUT_KEY_0>;
		};
		button1: button_1 {
			/* gpio flags need validation */
			gpios = <&gpiof 7 GPIO_ACTIVE_LOW>;
			label = "User Push Button 1";
			zephyr,code = <INPUT_KEY_1>;
		};
	};

};

&usart0 {
	current-speed = <115200>;
	pinctrl-0 = <&usart0_default>;
	pinctrl-names = "default";
	status = "okay";
};

&usart1 {
	compatible = "silabs,gecko-spi-usart";

	#address-cells = <1>;
	#size-cells = <0>;

	pinctrl-0 = <&usart1_default>;
	pinctrl-names = "default";

	cs-gpios = <&gpioa 4 GPIO_ACTIVE_LOW>;

	status = "okay";

	mx25r80: mx25r8035f@0 {
		compatible = "jedec,spi-nor";
		reg = <0>;
		spi-max-frequency = <33000000>;
		size = <0x800000>;
		jedec-id = [c2 28 14];
	};
};

&rtcc0 {
	prescaler = <1>;
	status = "okay";
};

&gpio {
	location-swo = <0>;
	status = "okay";
};

&gpioa {
	status = "okay";

	board-controller-enable {
		gpio-hog;
		gpios = <5 GPIO_ACTIVE_HIGH>;
		output-high;
	};
};

&gpiob {
	status = "okay";
};

&gpioc {
	status = "okay";
};

&gpiod {
	status = "okay";
};

&gpiof {
	status = "okay";
};

&wdog0 {
	status = "okay";
};