/*
 * Copyright (c) 2019 PHYTEC Messtechnik GmbH
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#include <zephyr/dt-bindings/display/ili9xxx.h>

/ {
	chosen {
		zephyr,display = &adafruit_2_8_tft_touch_v2_ili9340;
	};

	lvgl_pointer {
		compatible = "zephyr,lvgl-pointer-input";
		input = <&ft5336_adafruit_2_8_tft_touch_v2>;
		swap-xy;
		invert-x;
		invert-y;
	};

	adafruit_2_8_tft_touch_v2_mipi_dbi: adafruit_2_8_tft_touch_v2_mipi_dbi {
		compatible = "zephyr,mipi-dbi-spi";
		spi-dev = <&arduino_spi>;
		dc-gpios = <&arduino_header 15 GPIO_ACTIVE_HIGH>;	/* D9 */
		write-only;
		#address-cells = <1>;
		#size-cells = <0>;

		adafruit_2_8_tft_touch_v2_ili9340: ili9340@0 {
			compatible = "ilitek,ili9340";
			mipi-max-frequency = <15151515>;
			reg = <0>;
			width = <320>;
			height = <240>;
			pixel-format = <ILI9XXX_PIXEL_FORMAT_RGB888>;
			rotation = <90>;
			frmctr1 = [00 18];
			pwctrl1 = [23 00];
			vmctrl1 = [3e 28];
			vmctrl2 = [86];
			pgamctrl = [0f 31 2b 0c 0e 08 4e f1 37 07 10 03 0e 09 00];
			ngamctrl = [00 0e 14 03 11 07 31 c1 48 08 0f 0c 31 36 0f];
		};
	};
};

&arduino_spi {
	status = "okay";
	cs-gpios = <&arduino_header 16 GPIO_ACTIVE_LOW>,	/* D10 */
		   <&arduino_header 10 GPIO_ACTIVE_LOW>;	/* D04 */

	adafruit_2_8_tft_touch_v2_sdhc: sdhc@1 {
		compatible = "zephyr,sdhc-spi-slot";
		reg = <1>;
		status = "okay";
		spi-max-frequency = <24000000>;
		mmc {
			compatible = "zephyr,sdmmc-disk";
			status = "okay";
		};
	};
};

&arduino_i2c {
	ft5336_adafruit_2_8_tft_touch_v2: ft5336@38 {
		compatible = "focaltech,ft5336";
		reg = <0x38>;
		/* Uncomment if IRQ line is available (requires to solder jumper) */
		/* int-gpios = <&arduino_header 13 GPIO_ACTIVE_LOW>; */ /* D7 */
	};
};