Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 | /* * Copyright (c) 2022 Henrik Brix Andersen <henrik@brixandersen.dk> * * SPDX-License-Identifier: Apache-2.0 */ /dts-v1/; #include <espressif/esp32.dtsi> #include "olimex_esp32_evb-pinctrl.dtsi" / { model = "Olimex ESP32-EVB"; compatible = "olimex,esp32-evb", "espressif,esp32-wroom-32e", "espressif,esp32"; chosen { zephyr,console = &uart0; zephyr,shell-uart = &uart0; zephyr,sram = &sram0; zephyr,flash = &flash0; }; aliases { sw0 = &button1; }; gpio_keys { compatible = "gpio-keys"; button1: button1 { gpios = <&gpio 34 GPIO_ACTIVE_LOW>; label = "BUT1"; }; }; relay1: relay1 { compatible = "regulator-fixed"; enable-gpios = <&gpio 32 GPIO_ACTIVE_HIGH>; regulator-name = "REL1"; label = "REL1"; startup-delay-us = <10000>; off-on-delay-us = <5000>; }; relay2: relay2 { compatible = "regulator-fixed"; enable-gpios = <&gpio 33 GPIO_ACTIVE_HIGH>; regulator-name = "REL2"; label = "REL2"; startup-delay-us = <10000>; off-on-delay-us = <5000>; }; }; &cpu0 { clock-frequency = <ESP32_CLK_CPU_240M>; }; &cpu1 { clock-frequency = <ESP32_CLK_CPU_240M>; }; uext_serial: &uart1 {}; uext_i2c: &i2c0 {}; uext_spi: &spi2 {}; &uart0 { status = "okay"; current-speed = <115200>; pinctrl-0 = <&uart0_tx_gpio1 &uart0_rx_gpio3>; pinctrl-names = "default"; }; &uart1 { status = "okay"; current-speed = <115200>; pinctrl-0 = <&uart1_tx_gpio4 &uart1_rx_gpio36>; pinctrl-names = "default"; }; &i2c0 { status = "okay"; clock-frequency = <I2C_BITRATE_STANDARD>; sda-pin = <16>; scl-pin = <13>; pinctrl-0 = <&i2c0_scl_gpio16 &i2c0_sda_gpio13>; pinctrl-names = "default"; }; &spi2 { status = "okay"; pinctrl-0 = <&spim2_miso_gpio15 &spim2_mosi_gpio2 &spim2_sclk_gpio14 &spim2_csel_gpio17>; pinctrl-names = "default"; #address-cells = <1>; #size-cells = <0>; }; &gpio0 { status = "okay"; }; &gpio1 { status = "okay"; }; &timer0 { status = "okay"; }; &timer1 { status = "okay"; }; &timer2 { status = "okay"; }; &timer3 { status = "okay"; }; &trng0 { status = "okay"; }; &flash0 { status = "okay"; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; /* Reserve 60kB for the bootloader */ boot_partition: partition@1000 { label = "mcuboot"; reg = <0x00001000 DT_SIZE_K(60)>; read-only; }; /* Reserve 1024kB for the application in slot 0 */ slot0_partition: partition@10000 { label = "image-0"; reg = <0x00010000 DT_SIZE_K(1024)>; }; /* Reserve 1024kB for the application in slot 1 */ slot1_partition: partition@110000 { label = "image-1"; reg = <0x00110000 DT_SIZE_K(1024)>; }; /* Reserve 256kB for the scratch partition */ scratch_partition: partition@210000 { label = "image-scratch"; reg = <0x00210000 DT_SIZE_K(256)>; }; storage_partition: partition@250000 { label = "storage"; reg = <0x00250000 DT_SIZE_K(24)>; }; }; }; |