Linux Audio

Check our new training course

Embedded Linux Audio

Check our new training course
with Creative Commons CC-BY-SA
lecture materials

Bootlin logo

Elixir Cross Referencer

Loading...
  1
  2
  3
  4
  5
  6
  7
  8
  9
 10
 11
 12
 13
 14
 15
 16
 17
 18
 19
 20
 21
 22
 23
 24
 25
 26
 27
 28
 29
 30
 31
 32
 33
 34
 35
 36
 37
 38
 39
 40
 41
 42
 43
 44
 45
 46
 47
 48
 49
 50
 51
 52
 53
 54
 55
 56
 57
 58
 59
 60
 61
 62
 63
 64
 65
 66
 67
 68
 69
 70
 71
 72
 73
 74
 75
 76
 77
 78
 79
 80
 81
 82
 83
 84
 85
 86
 87
 88
 89
 90
 91
 92
 93
 94
 95
 96
 97
 98
 99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
/*
 * Copyright (c) 2020 Nuvoton Technology Corporation.
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#define DT_DRV_COMPAT nuvoton_npcx_uart

#include <sys/__assert.h>
#include <drivers/gpio.h>
#include <drivers/uart.h>
#include <drivers/clock_control.h>
#include <kernel.h>
#include <pm/device.h>
#include <pm/pm.h>
#include <soc.h>
#include "soc_miwu.h"
#include "soc_power.h"

#include <logging/log.h>
LOG_MODULE_REGISTER(uart_npcx, LOG_LEVEL_ERR);

/* Driver config */
struct uart_npcx_config {
	struct uart_device_config uconf;
	/* clock configuration */
	struct npcx_clk_cfg clk_cfg;
	/* int-mux configuration */
	const struct npcx_wui uart_rx_wui;
	/* pinmux configuration */
	const uint8_t alts_size;
	const struct npcx_alt *alts_list;
};

enum uart_pm_constraint_flag {
	UART_PM_CONSTRAINT_TX_FLAG,
	UART_PM_CONSTRAINT_RX_FLAG,

	UART_PM_CONSTRAINT_FLAG_COUNT,
};

/* Driver data */
struct uart_npcx_data {
	/* Baud rate */
	uint32_t baud_rate;
	struct miwu_dev_callback uart_rx_cb;
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
	uart_irq_callback_user_data_t user_cb;
	void *user_data;
#endif
#ifdef CONFIG_PM
	ATOMIC_DEFINE(pm_constraint_flag, UART_PM_CONSTRAINT_FLAG_COUNT);
#ifdef CONFIG_UART_CONSOLE_INPUT_EXPIRED
	struct k_work_delayable rx_refresh_timeout_work;
#endif
#endif
};

/* Driver convenience defines */
#define HAL_INSTANCE(dev)                                                                          \
	((struct uart_reg *)((const struct uart_npcx_config *)(dev)->config)->uconf.base)

#if defined(CONFIG_PM) && defined(CONFIG_UART_INTERRUPT_DRIVEN)
static void uart_npcx_pm_constraint_set(struct uart_npcx_data *data,
					enum uart_pm_constraint_flag flag)
{
	if (atomic_test_and_set_bit(data->pm_constraint_flag, flag) == 0) {
		pm_constraint_set(PM_STATE_SUSPEND_TO_IDLE);
	}
}

static void uart_npcx_pm_constraint_rel(struct uart_npcx_data *data,
					enum uart_pm_constraint_flag flag)
{
	if (atomic_test_and_clear_bit(data->pm_constraint_flag, flag) == 1) {
		pm_constraint_release(PM_STATE_SUSPEND_TO_IDLE);
	}
}
#endif /* defined(CONFIG_PM) && defined(CONFIG_UART_INTERRUPT_DRIVEN) */

/* UART local functions */
static int uart_set_npcx_baud_rate(struct uart_reg *const inst, int baud_rate, int src_clk)
{
	/* Fix baud rate to 115200 so far */
	if (baud_rate == 115200) {
		if (src_clk == 15000000) {
			inst->UPSR = 0x38;
			inst->UBAUD = 0x01;
		} else if (src_clk == 20000000) {
			inst->UPSR = 0x08;
			inst->UBAUD = 0x0a;
		} else {
			return -EINVAL;
		}
	} else {
		return -EINVAL;
	}

	return 0;
}

#ifdef CONFIG_UART_INTERRUPT_DRIVEN
static int uart_npcx_tx_fifo_ready(const struct device *dev)
{
	struct uart_reg *const inst = HAL_INSTANCE(dev);

	/* True if the Tx FIFO is not completely full */
	return !(GET_FIELD(inst->UFTSTS, NPCX_UFTSTS_TEMPTY_LVL) == 0);
}

static int uart_npcx_rx_fifo_available(const struct device *dev)
{
	struct uart_reg *const inst = HAL_INSTANCE(dev);

	/* True if at least one byte is in the Rx FIFO */
	return IS_BIT_SET(inst->UFRSTS, NPCX_UFRSTS_RFIFO_NEMPTY_STS);
}

static void uart_npcx_dis_all_tx_interrupts(const struct device *dev)
{
	struct uart_reg *const inst = HAL_INSTANCE(dev);

	/* Disable all Tx interrupts */
	inst->UFTCTL &= ~(BIT(NPCX_UFTCTL_TEMPTY_LVL_EN) | BIT(NPCX_UFTCTL_TEMPTY_EN) |
			  BIT(NPCX_UFTCTL_NXMIP_EN));
}

static void uart_npcx_clear_rx_fifo(const struct device *dev)
{
	struct uart_reg *const inst = HAL_INSTANCE(dev);
	uint8_t scratch;

	/* Read all dummy bytes out from Rx FIFO */
	while (uart_npcx_rx_fifo_available(dev))
		scratch = inst->URBUF;
}

static int uart_npcx_fifo_fill(const struct device *dev, const uint8_t *tx_data, int size)
{
	struct uart_reg *const inst = HAL_INSTANCE(dev);
	uint8_t tx_bytes = 0U;

	/* If Tx FIFO is still ready to send */
	while ((size - tx_bytes > 0) && uart_npcx_tx_fifo_ready(dev)) {
		/* Put a character into Tx FIFO */
#ifdef CONFIG_PM
		struct uart_npcx_data *data = dev->data;

		uart_npcx_pm_constraint_set(data, UART_PM_CONSTRAINT_TX_FLAG);
		inst->UTBUF = tx_data[tx_bytes++];
		inst->UFTCTL |= BIT(NPCX_UFTCTL_NXMIP_EN);
#else
		inst->UTBUF = tx_data[tx_bytes++];
#endif /* CONFIG_PM */
	}

	return tx_bytes;
}

static int uart_npcx_fifo_read(const struct device *dev, uint8_t *rx_data, const int size)
{
	struct uart_reg *const inst = HAL_INSTANCE(dev);
	unsigned int rx_bytes = 0U;

	/* If least one byte is in the Rx FIFO */
	while ((size - rx_bytes > 0) && uart_npcx_rx_fifo_available(dev)) {
		/* Receive one byte from Rx FIFO */
		rx_data[rx_bytes++] = inst->URBUF;
	}

	return rx_bytes;
}

static void uart_npcx_irq_tx_enable(const struct device *dev)
{
	struct uart_reg *const inst = HAL_INSTANCE(dev);

	inst->UFTCTL |= BIT(NPCX_UFTCTL_TEMPTY_EN);
}

static void uart_npcx_irq_tx_disable(const struct device *dev)
{
	struct uart_reg *const inst = HAL_INSTANCE(dev);

	inst->UFTCTL &= ~(BIT(NPCX_UFTCTL_TEMPTY_EN));
}

static int uart_npcx_irq_tx_ready(const struct device *dev)
{
	return uart_npcx_tx_fifo_ready(dev);
}

static int uart_npcx_irq_tx_complete(const struct device *dev)
{
	struct uart_reg *const inst = HAL_INSTANCE(dev);

	/* Tx FIFO is empty or last byte is sending */
	return IS_BIT_SET(inst->UFTSTS, NPCX_UFTSTS_NXMIP);
}

static void uart_npcx_irq_rx_enable(const struct device *dev)
{
	struct uart_reg *const inst = HAL_INSTANCE(dev);

	inst->UFRCTL |= BIT(NPCX_UFRCTL_RNEMPTY_EN);
}

static void uart_npcx_irq_rx_disable(const struct device *dev)
{
	struct uart_reg *const inst = HAL_INSTANCE(dev);

	inst->UFRCTL &= ~(BIT(NPCX_UFRCTL_RNEMPTY_EN));
}

static int uart_npcx_irq_rx_ready(const struct device *dev)
{
	return uart_npcx_rx_fifo_available(dev);
}

static void uart_npcx_irq_err_enable(const struct device *dev)
{
	struct uart_reg *const inst = HAL_INSTANCE(dev);

	inst->UICTRL |= BIT(NPCX_UICTRL_EEI);
}

static void uart_npcx_irq_err_disable(const struct device *dev)
{
	struct uart_reg *const inst = HAL_INSTANCE(dev);

	inst->UICTRL &= ~(BIT(NPCX_UICTRL_EEI));
}

static int uart_npcx_irq_is_pending(const struct device *dev)
{
	return (uart_npcx_irq_tx_ready(dev) || uart_npcx_irq_rx_ready(dev));
}

static int uart_npcx_irq_update(const struct device *dev)
{
	ARG_UNUSED(dev);

	return 1;
}

static void uart_npcx_irq_callback_set(const struct device *dev, uart_irq_callback_user_data_t cb,
				       void *cb_data)
{
	struct uart_npcx_data *data = dev->data;

	data->user_cb = cb;
	data->user_data = cb_data;
}

static void uart_npcx_isr(const struct device *dev)
{
	struct uart_npcx_data *data = dev->data;

	/*
	 * Set pm constraint to prevent the system enter suspend state within
	 * the CONFIG_UART_CONSOLE_INPUT_EXPIRED_TIMEOUT period.
	 */
#ifdef CONFIG_UART_CONSOLE_INPUT_EXPIRED
	if (uart_npcx_irq_rx_ready(dev)) {
		k_timeout_t delay = K_MSEC(CONFIG_UART_CONSOLE_INPUT_EXPIRED_TIMEOUT);

		uart_npcx_pm_constraint_set(data, UART_PM_CONSTRAINT_RX_FLAG);
		k_work_reschedule(&data->rx_refresh_timeout_work, delay);
	}
#endif

	if (data->user_cb) {
		data->user_cb(dev, data->user_data);
	}
#ifdef CONFIG_PM
	struct uart_reg *const inst = HAL_INSTANCE(dev);

	if (IS_BIT_SET(inst->UFTCTL, NPCX_UFTCTL_NXMIP_EN) &&
	    IS_BIT_SET(inst->UFTSTS, NPCX_UFTSTS_NXMIP)) {
		uart_npcx_pm_constraint_rel(data, UART_PM_CONSTRAINT_TX_FLAG);
		inst->UFTCTL &= ~BIT(NPCX_UFTCTL_NXMIP_EN);
	}
#endif /* CONFIG_PM */
}

/*
 * Poll-in implementation for interrupt driven config, forward call to
 * uart_npcx_fifo_read().
 */
static int uart_npcx_poll_in(const struct device *dev, unsigned char *c)
{
	return uart_npcx_fifo_read(dev, c, 1) ? 0 : -1;
}

/*
 * Poll-out implementation for interrupt driven config, forward call to
 * uart_npcx_fifo_fill().
 */
static void uart_npcx_poll_out(const struct device *dev, unsigned char c)
{
	while (!uart_npcx_fifo_fill(dev, &c, 1))
		continue;
}

#else /* !CONFIG_UART_INTERRUPT_DRIVEN */

/*
 * Poll-in implementation for byte mode config, read byte from URBUF if
 * available.
 */
static int uart_npcx_poll_in(const struct device *dev, unsigned char *c)
{
	struct uart_reg *const inst = HAL_INSTANCE(dev);

	/* Rx single byte buffer is not full */
	if (!IS_BIT_SET(inst->UICTRL, NPCX_UICTRL_RBF))
		return -1;

	*c = inst->URBUF;
	return 0;
}

/*
 * Poll-out implementation for byte mode config, write byte to UTBUF if empty.
 */
static void uart_npcx_poll_out(const struct device *dev, unsigned char c)
{
	struct uart_reg *const inst = HAL_INSTANCE(dev);

	/* Wait while Tx single byte buffer is ready to send */
	while (!IS_BIT_SET(inst->UICTRL, NPCX_UICTRL_TBE))
		continue;

	inst->UTBUF = c;
}
#endif /* !CONFIG_UART_INTERRUPT_DRIVEN */

/* UART api functions */
static int uart_npcx_err_check(const struct device *dev)
{
	struct uart_reg *const inst = HAL_INSTANCE(dev);
	uint32_t err = 0U;
	uint8_t stat = inst->USTAT;

	if (IS_BIT_SET(stat, NPCX_USTAT_DOE))
		err |= UART_ERROR_OVERRUN;

	if (IS_BIT_SET(stat, NPCX_USTAT_PE))
		err |= UART_ERROR_PARITY;

	if (IS_BIT_SET(stat, NPCX_USTAT_FE))
		err |= UART_ERROR_FRAMING;

	return err;
}

static __unused void uart_npcx_rx_wk_isr(const struct device *dev, struct npcx_wui *wui)
{
	/*
	 * Set pm constraint to prevent the system enter suspend state within
	 * the CONFIG_UART_CONSOLE_INPUT_EXPIRED_TIMEOUT period.
	 */
#ifdef CONFIG_UART_CONSOLE_INPUT_EXPIRED
	struct uart_npcx_data *data = dev->data;
	k_timeout_t delay = K_MSEC(CONFIG_UART_CONSOLE_INPUT_EXPIRED_TIMEOUT);

	uart_npcx_pm_constraint_set(data, UART_PM_CONSTRAINT_RX_FLAG);
	k_work_reschedule(&data->rx_refresh_timeout_work, delay);
#endif

	/*
	 * Disable MIWU CR_SIN interrupt to avoid the other redundant interrupts
	 * after ec wakes up.
	 */
	npcx_uart_disable_access_interrupt();
}

#ifdef CONFIG_UART_CONSOLE_INPUT_EXPIRED
static void uart_npcx_rx_refresh_timeout(struct k_work *work)
{
	struct uart_npcx_data *data =
		CONTAINER_OF(work, struct uart_npcx_data, rx_refresh_timeout_work);

	uart_npcx_pm_constraint_rel(data, UART_PM_CONSTRAINT_RX_FLAG);
}
#endif

/* UART driver registration */
static const struct uart_driver_api uart_npcx_driver_api = {
	.poll_in = uart_npcx_poll_in,
	.poll_out = uart_npcx_poll_out,
	.err_check = uart_npcx_err_check,
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
	.fifo_fill = uart_npcx_fifo_fill,
	.fifo_read = uart_npcx_fifo_read,
	.irq_tx_enable = uart_npcx_irq_tx_enable,
	.irq_tx_disable = uart_npcx_irq_tx_disable,
	.irq_tx_ready = uart_npcx_irq_tx_ready,
	.irq_tx_complete = uart_npcx_irq_tx_complete,
	.irq_rx_enable = uart_npcx_irq_rx_enable,
	.irq_rx_disable = uart_npcx_irq_rx_disable,
	.irq_rx_ready = uart_npcx_irq_rx_ready,
	.irq_err_enable = uart_npcx_irq_err_enable,
	.irq_err_disable = uart_npcx_irq_err_disable,
	.irq_is_pending = uart_npcx_irq_is_pending,
	.irq_update = uart_npcx_irq_update,
	.irq_callback_set = uart_npcx_irq_callback_set,
#endif /* CONFIG_UART_INTERRUPT_DRIVEN */
};

static int uart_npcx_init(const struct device *dev)
{
	const struct uart_npcx_config *const config = dev->config;
	struct uart_npcx_data *const data = dev->data;
	struct uart_reg *const inst = HAL_INSTANCE(dev);
	const struct device *const clk_dev = DEVICE_DT_GET(NPCX_CLK_CTRL_NODE);
	uint32_t uart_rate;
	int ret;

	/* Turn on device clock first and get source clock freq. */
	ret = clock_control_on(clk_dev, (clock_control_subsys_t *)&config->clk_cfg);
	if (ret < 0) {
		LOG_ERR("Turn on UART clock fail %d", ret);
		return ret;
	}

	/*
	 * If apb2's clock is not 15MHz, we need to find the other optimized
	 * values of UPSR and UBAUD for baud rate 115200.
	 */
	ret = clock_control_get_rate(clk_dev, (clock_control_subsys_t *)&config->clk_cfg,
				     &uart_rate);
	if (ret < 0) {
		LOG_ERR("Get UART clock rate error %d", ret);
		return ret;
	}

	/* Configure baud rate */
	ret = uart_set_npcx_baud_rate(inst, data->baud_rate, uart_rate);
	if (ret < 0) {
		LOG_ERR("Set baud rate %d with unsupported apb clock %d failed", data->baud_rate,
			uart_rate);
		return ret;
	}

	/*
	 * 8-N-1, FIFO enabled.  Must be done after setting
	 * the divisor for the new divisor to take effect.
	 */
	inst->UFRS = 0x00;

	/* Initialize UART FIFO if mode is interrupt driven */
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
	/* Enable the UART FIFO mode */
	inst->UMDSL |= BIT(NPCX_UMDSL_FIFO_MD);

	/* Disable all UART tx FIFO interrupts */
	uart_npcx_dis_all_tx_interrupts(dev);

	/* Clear UART rx FIFO */
	uart_npcx_clear_rx_fifo(dev);

	/* Configure UART interrupts */
	config->uconf.irq_config_func(dev);
#endif

	if (IS_ENABLED(CONFIG_PM)) {
		/* Initialize a miwu device input and its callback function */
		npcx_miwu_init_dev_callback(&data->uart_rx_cb, &config->uart_rx_wui,
					    uart_npcx_rx_wk_isr, dev);
		npcx_miwu_manage_dev_callback(&data->uart_rx_cb, true);
		/*
		 * Configure the UART wake-up event triggered from a falling
		 * edge on CR_SIN pin. No need for callback function.
		 */
		npcx_miwu_interrupt_configure(&config->uart_rx_wui, NPCX_MIWU_MODE_EDGE,
					      NPCX_MIWU_TRIG_LOW);

#ifdef CONFIG_UART_CONSOLE_INPUT_EXPIRED
		k_work_init_delayable(&data->rx_refresh_timeout_work, uart_npcx_rx_refresh_timeout);
#endif
	}

	/* Configure pin-mux for uart device */
	npcx_pinctrl_mux_configure(config->alts_list, config->alts_size, 1);

	return 0;
}

#ifdef CONFIG_UART_INTERRUPT_DRIVEN
#define NPCX_UART_IRQ_CONFIG_FUNC_DECL(inst)                                                       \
	static void uart_npcx_irq_config_##inst(const struct device *dev)
#define NPCX_UART_IRQ_CONFIG_FUNC_INIT(inst) .irq_config_func = uart_npcx_irq_config_##inst,
#define NPCX_UART_IRQ_CONFIG_FUNC(inst)                                                            \
	static void uart_npcx_irq_config_##inst(const struct device *dev)                          \
	{                                                                                          \
		IRQ_CONNECT(DT_INST_IRQN(inst), DT_INST_IRQ(inst, priority), uart_npcx_isr,        \
			    DEVICE_DT_INST_GET(inst), 0);                                          \
		irq_enable(DT_INST_IRQN(inst));                                                    \
	}
#else
#define NPCX_UART_IRQ_CONFIG_FUNC_DECL(inst)
#define NPCX_UART_IRQ_CONFIG_FUNC_INIT(inst)
#define NPCX_UART_IRQ_CONFIG_FUNC(inst)
#endif

#define NPCX_UART_INIT(inst)                                                                       \
	NPCX_UART_IRQ_CONFIG_FUNC_DECL(inst);                                                      \
												   \
	static const struct npcx_alt uart_alts##inst[] = NPCX_DT_ALT_ITEMS_LIST(inst);             \
												   \
	static const struct uart_npcx_config uart_npcx_cfg_##inst = {                              \
		.uconf = { .base = (uint8_t *)DT_INST_REG_ADDR(inst),                              \
			   NPCX_UART_IRQ_CONFIG_FUNC_INIT(inst) },                                 \
		.clk_cfg = NPCX_DT_CLK_CFG_ITEM(inst),                                             \
		.uart_rx_wui = NPCX_DT_WUI_ITEM_BY_NAME(0, uart_rx),                               \
		.alts_size = ARRAY_SIZE(uart_alts##inst),                                          \
		.alts_list = uart_alts##inst,                                                      \
	};                                                                                         \
												   \
	static struct uart_npcx_data uart_npcx_data_##inst = { .baud_rate = DT_INST_PROP(          \
								       inst, current_speed) };     \
												   \
	DEVICE_DT_INST_DEFINE(inst, &uart_npcx_init, NULL, &uart_npcx_data_##inst,                 \
			      &uart_npcx_cfg_##inst, PRE_KERNEL_1, CONFIG_SERIAL_INIT_PRIORITY,    \
			      &uart_npcx_driver_api);                                              \
												   \
	NPCX_UART_IRQ_CONFIG_FUNC(inst)

DT_INST_FOREACH_STATUS_OKAY(NPCX_UART_INIT)

#define ENABLE_MIWU_CRIN_IRQ(inst)                                                                 \
	npcx_miwu_irq_get_and_clear_pending(&uart_npcx_cfg_##inst.uart_rx_wui);                    \
	npcx_miwu_irq_enable(&uart_npcx_cfg_##inst.uart_rx_wui);

#define DISABLE_MIWU_CRIN_IRQ(inst) npcx_miwu_irq_disable(&uart_npcx_cfg_##inst.uart_rx_wui);

void npcx_uart_enable_access_interrupt(void)
{
	DT_INST_FOREACH_STATUS_OKAY(ENABLE_MIWU_CRIN_IRQ)
}

void npcx_uart_disable_access_interrupt(void)
{
	DT_INST_FOREACH_STATUS_OKAY(DISABLE_MIWU_CRIN_IRQ)
}