Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 | /* * Copyright (c) 2017 I-SENSE group of ICCS * * SoC device tree include for STM32F103xC SoCs * where 'x' is replaced for specific SoCs like {R,V,Z} * * SPDX-License-Identifier: Apache-2.0 */ #include <mem.h> #include <st/f1/stm32f103Xb.dtsi> / { sram0: memory@20000000 { reg = <0x20000000 DT_SIZE_K(48)>; }; soc { flash-controller@40022000 { flash0: flash@8000000 { reg = <0x08000000 DT_SIZE_K(256)>; erase-block-size = <DT_SIZE_K(2)>; }; }; uart4: serial@40004c00 { compatible = "st,stm32-uart"; reg = <0x40004c00 0x400>; clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00080000>; interrupts = <52 0>; status = "disabled"; label = "UART_4"; }; uart5: serial@40005000 { compatible = "st,stm32-uart"; reg = <0x40005000 0x400>; clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00100000>; interrupts = <53 0>; status = "disabled"; label = "UART_5"; }; timers5: timers@40000c00 { compatible = "st,stm32-timers"; reg = <0x40000c00 0x400>; clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00000008>; interrupts = <50 0>; interrupt-names = "global"; status = "disabled"; label = "TIMERS_5"; pwm { compatible = "st,stm32-pwm"; status = "disabled"; st,prescaler = <0>; label = "PWM_5"; #pwm-cells = <3>; }; }; timers6: timers@40001000 { compatible = "st,stm32-timers"; reg = <0x40001000 0x400>; clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00000010>; interrupts = <54 0>; interrupt-names = "global"; status = "disabled"; label = "TIMERS_6"; pwm { compatible = "st,stm32-pwm"; status = "disabled"; st,prescaler = <0>; label = "PWM_6"; #pwm-cells = <3>; }; }; timers7: timers@40001400 { compatible = "st,stm32-timers"; reg = <0x40001400 0x400>; clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00000020>; interrupts = <55 0>; interrupt-names = "global"; status = "disabled"; label = "TIMERS_7"; pwm { compatible = "st,stm32-pwm"; status = "disabled"; st,prescaler = <0>; label = "PWM_7"; #pwm-cells = <3>; }; }; spi3: spi@40003c00 { compatible = "st,stm32-spi"; #address-cells = <1>; #size-cells = <0>; reg = <0X40003c00 0x400>; clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00008000>; interrupts = <51 5>; label = "SPI_3"; status = "disabled"; }; pinctrl: pin-controller@40010800 { reg = <0x40010800 0x2000>; gpiof: gpio@40011c00 { compatible = "st,stm32-gpio"; gpio-controller; #gpio-cells = <2>; reg = <0x40011c00 0x400>; clocks = <&rcc STM32_CLOCK_BUS_APB2 0x00000081>; label = "GPIOF"; }; gpiog: gpio@40012000 { compatible = "st,stm32-gpio"; gpio-controller; #gpio-cells = <2>; reg = <0x40012000 0x400>; clocks = <&rcc STM32_CLOCK_BUS_APB2 0x00000101>; label = "GPIOG"; }; }; adc2: adc@40012800 { compatible = "st,stm32-adc"; reg = <0x40012800 0x400>; clocks = <&rcc STM32_CLOCK_BUS_APB2 0x00000400>; /* Shares vector with ADC1 */ interrupts = <18 0>; status = "disabled"; label = "ADC_2"; #io-channel-cells = <1>; }; adc3: adc@40013c00 { compatible = "st,stm32-adc"; reg = <0x40013c00 0x400>; clocks = <&rcc STM32_CLOCK_BUS_APB2 0x00008000>; interrupts = <47 0>; status = "disabled"; label = "ADC_3"; #io-channel-cells = <1>; }; timers8: timers@40013400 { compatible = "st,stm32-timers"; reg = <0x40013400 0x400>; clocks = <&rcc STM32_CLOCK_BUS_APB2 0x00002000>; interrupts = <43 0>, <44 0>, <45 0>, <46 0>; interrupt-names = "brk", "up", "trgcom", "cc"; status = "disabled"; label = "TIMERS_8"; pwm { compatible = "st,stm32-pwm"; status = "disabled"; st,prescaler = <0>; label = "PWM_8"; #pwm-cells = <3>; }; }; dma2: dma@40020400 { compatible = "st,stm32-dma-v2bis"; #dma-cells = <2>; reg = <0x40020400 0x400>; clocks = <&rcc STM32_CLOCK_BUS_AHB1 0x2>; interrupts = < 56 0 57 0 58 0 59 0 60 0>; status = "disabled"; label = "DMA_2"; }; }; }; |