Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 | /* * Copyright (c) 2017 Linaro Limited * * Based on nrf52840dk_nrf52840.dts * modified 2018 Tavish Naruka <tavishnaruka@gmail.com> * * SPDX-License-Identifier: Apache-2.0 */ /dts-v1/; #include <nordic/nrf52840_qiaa.dtsi> / { model = "Electronut Labs Blip"; compatible = "nordic,pca10056-dk"; chosen { zephyr,console = &uart0; zephyr,shell-uart = &uart0; zephyr,uart-mcumgr = &uart0; zephyr,bt-mon-uart = &uart0; zephyr,bt-c2h-uart = &uart0; zephyr,sram = &sram0; zephyr,flash = &flash0; }; leds { compatible = "gpio-leds"; led0: led_0 { gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; label = "Green LED 0"; }; led1: led_1 { gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; label = "Red LED 1"; }; led2: led_2 { gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; label = "Blue LED 2"; }; }; buttons { compatible = "gpio-keys"; button0: button_0 { gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; label = "Push button switch 0"; }; }; /* These aliases are provided for compatibility with samples */ aliases { led0 = &led0; led1 = &led1; led2 = &led2; sw0 = &button0; }; }; &adc { status = "okay"; }; &gpiote { status = "okay"; }; &gpio0 { status = "okay"; }; &gpio1 { status = "okay"; }; &uart0 { compatible = "nordic,nrf-uart"; current-speed = <115200>; status = "okay"; tx-pin = <6>; rx-pin = <8>; rts-pin = <5>; cts-pin = <7>; }; &i2c0 { compatible = "nordic,nrf-twi"; status = "okay"; sda-pin = <12>; scl-pin = <11>; }; &i2c1 { compatible = "nordic,nrf-twi"; /* Cannot be used together with spi1. */ /* status = "okay"; */ sda-pin = <2>; scl-pin = <3>; }; &spi0 { compatible = "nordic,nrf-spi"; /* Cannot be used together with i2c0. */ /* status = "okay"; */ sck-pin = <19>; mosi-pin = <20>; miso-pin = <21>; }; &spi1 { compatible = "nordic,nrf-spi"; status = "okay"; sck-pin = <25>; mosi-pin = <34>; miso-pin = <24>; }; &spi2 { compatible = "nordic,nrf-spi"; status = "okay"; sck-pin = <26>; mosi-pin = <23>; miso-pin = <27>; }; &spi3 { status = "okay"; sck-pin = <29>; mosi-pin = <30>; miso-pin = <31>; }; &flash0 { partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; boot_partition: partition@0 { label = "mcuboot"; reg = <0x000000000 0x0000C000>; }; slot0_partition: partition@c000 { label = "image-0"; reg = <0x0000C000 0x00067000>; }; slot1_partition: partition@73000 { label = "image-1"; reg = <0x00073000 0x00067000>; }; scratch_partition: partition@da000 { label = "image-scratch"; reg = <0x000da000 0x0001e000>; }; /* * The flash starting at 0x000f8000 and ending at * 0x000fffff is reserved for use by the application. */ /* * Storage partition will be used by FCB/LittleFS/NVS * if enabled. */ storage_partition: partition@f8000 { label = "storage"; reg = <0x000f8000 0x00008000>; }; }; }; zephyr_udc0: &usbd { compatible = "nordic,nrf-usbd"; status = "okay"; }; |