Linux Audio

Check our new training course

Embedded Linux Audio

Check our new training course
with Creative Commons CC-BY-SA
lecture materials

Bootlin logo

Elixir Cross Referencer

Loading...
/*
 * Copyright (c) 2019-2021 Vestas Wind Systems A/S
 *
 * SPDX-License-Identifier: Apache-2.0
 */

/dts-v1/;

#include <nxp/MKE18F512VLL16.dtsi>
#include <dt-bindings/clock/kinetis_scg.h>
#include <dt-bindings/pwm/pwm.h>

/ {
	model = "NXP Kinetis KE18 MCU Tower System Module";
	compatible = "nxp,mke18f16", "nxp,ke18f", "nxp,ke1xf";

	aliases {
		led0 = &orange_led;
		led1 = &yellow_led;
		led2 = &green_led;
		led3 = &red_led;
		led4 = &tri_red_led;
		led5 = &tri_green_led;
		led6 = &tri_blue_led;
		pwm-led0 = &orange_pwm_led;
		pwm-led1 = &yellow_pwm_led;
		pwm-led2 = &green_pwm_led;
		pwm-led3 = &red_pwm_led;
		red-pwm-led = &tri_red_pwm_led;
		green-pwm-led = &tri_green_pwm_led;
		blue-pwm-led = &tri_blue_pwm_led;
		sw0 = &user_button_3;
		sw1 = &user_button_2;
	};

	chosen {
		zephyr,sram = &sram0;
		zephyr,flash = &flash0;
		zephyr,code-partition = &slot0_partition;
		zephyr,console = &lpuart0;
		zephyr,shell-uart = &lpuart0;
		zephyr,uart-pipe = &lpuart0;
		zephyr,can-primary = &flexcan0;
	};

	leds {
		compatible = "gpio-leds";
		orange_led: led_0 {
			gpios = <&gpioc 13 GPIO_ACTIVE_LOW>;
			label = "User LED D9";
		};
		yellow_led: led_1 {
			gpios = <&gpioc 12 GPIO_ACTIVE_LOW>;
			label = "User LED D8";
		};
		green_led: led_2 {
			gpios = <&gpioc 11 GPIO_ACTIVE_LOW>;
			label = "User LED D7";
		};
		red_led: led_3 {
			gpios = <&gpioc 10 GPIO_ACTIVE_LOW>;
			label = "User LED D6";
		};

		tri_red_led: led_4 {
			gpios = <&gpiod 16 GPIO_ACTIVE_LOW>;
			label = "User Tricolor LED D5 (Red)";
		};
		tri_green_led: led_5 {
			gpios = <&gpiod 15 GPIO_ACTIVE_LOW>;
			label = "User Tricolor LED D5 (Green)";
		};
		tri_blue_led: led_6 {
			gpios = <&gpiob 5 GPIO_ACTIVE_LOW>;
			label = "User Tricolor LED D5 (Blue)";
		};
	};

	pwmleds {
		compatible = "pwm-leds";
		orange_pwm_led: led_pwm_0 {
			pwms = <&ftm3 7 60000 PWM_POLARITY_INVERTED>;
			label = "User PWM LED D9";
		};
		yellow_pwm_led: led_pwm_1 {
			pwms = <&ftm3 6 60000 PWM_POLARITY_INVERTED>;
			label = "User PWM LED D8";
		};
		green_pwm_led: led_pwm_2 {
			pwms = <&ftm3 5 60000 PWM_POLARITY_INVERTED>;
			label = "User PWM LED D7";
		};
		red_pwm_led: led_pwm_3 {
			pwms = <&ftm3 4 60000 PWM_POLARITY_INVERTED>;
			label = "User PWM LED D6";
		};

		tri_red_pwm_led: led_pwm_4 {
			pwms = <&ftm0 1 60000 PWM_POLARITY_INVERTED>;
			label = "User Tricolor PWM LED D5 (Red)";
		};
		tri_green_pwm_led: led_pwm_5 {
			pwms = <&ftm0 0 60000 PWM_POLARITY_INVERTED>;
			label = "User Tricolor PWM LED D5 (Green)";
		};
		tri_blue_pwm_led: led_pwm_6 {
			pwms = <&ftm0 5 60000 PWM_POLARITY_INVERTED>;
			label = "User Tricolor PWM LED D5 (Blue)";
		};
	};

	gpio_keys {
		compatible = "gpio-keys";
		user_button_2: button_0 {
			label = "User SW2";
			gpios = <&gpiod 3 GPIO_ACTIVE_LOW>;
		};
		user_button_3: button_1 {
			label = "User SW3";
			gpios = <&gpiod 6 GPIO_ACTIVE_LOW>;
		};
	};
};

&cpu0 {
	clock-frequency = <120000000>;
	cpu-power-states = <&idle &stop>;
};

&idle {
	min-residency-us = <1>;
};

&stop {
	min-residency-us = <20000>;
	exit-latency-us = <13>;
};

&sim {
	clkout-source = <1>;
	clkout-divider = <0>;
	pinctrl-0 = <&CLKOUT_PTE10>;
};

&scg {
	sosc-mode = <KINETIS_SCG_SOSC_MODE_LOW_POWER>;

	sosc_clk {
		status = "okay";
		clock-frequency = <8000000>;
	};

	pll {
		clock-mult = <30>;
	};

	core_clk {
		clocks = <&spll_clk>;
	};

	bus_clk {
		clock-div = <2>;
	};

	slow_clk {
		clock-div = <5>;
	};

	clkout_clk {
		status = "okay";
	};

	splldiv1_clk {
		clock-div = <1>;
	};

	splldiv2_clk {
		clock-div = <2>;
	};

	sircdiv1_clk {
		clock-div = <1>;
	};

	sircdiv2_clk {
		clock-div = <2>;
	};

	fircdiv1_clk {
		clock-div = <1>;
	};

	fircdiv2_clk {
		clock-div = <1>;
	};

	soscdiv1_clk {
		clock-div = <1>;
	};

	soscdiv2_clk {
		clock-div = <1>;
	};
};

&lpuart0 {
	status = "okay";
	current-speed = <115200>;
	pinctrl-0 = <&LPUART0_RX_PTB0 &LPUART0_TX_PTB1>;
};

&ftm0 {
	status = "okay";
	compatible = "nxp,kinetis-ftm-pwm";
	#pwm-cells = <3>;
	pinctrl-0 = <&FTM0_CH0_PTD15 &FTM0_CH1_PTD16 &FTM0_CH5_PTB5>;
};

&ftm3 {
	status = "okay";
	compatible = "nxp,kinetis-ftm-pwm";
	#pwm-cells = <3>;
	pinctrl-0 = <&FTM3_CH4_PTC10 &FTM3_CH5_PTC11
		     &FTM3_CH6_PTC12 &FTM3_CH7_PTC13>;
};

&lpi2c0 {
	status = "okay";
	pinctrl-0 = <&LPI2C0_SDA_PTA2 &LPI2C0_SCL_PTA3>;

	fxos8700: fxos8700@1d {
		compatible = "nxp,fxos8700";
		reg = <0x1d>;
		label = "FXOS8700";
		reset-gpios = <&gpioc 15 GPIO_ACTIVE_HIGH>;
	};
};

&lpi2c1 {
	status = "okay";
	pinctrl-0 = <&LPI2C1_SDA_PTD8 &LPI2C1_SCL_PTD9>;
};

&lpspi0 {
	status = "okay";
	pinctrl-0 = <&LPSPI0_SCK_PTE0 &LPSPI0_SIN_PTE1
		     &LPSPI0_SOUT_PTE2 &LPSPI0_PCS2_PTE6>;
};

&lpspi1 {
	status = "okay";
	pinctrl-0 = <&LPSPI1_SCK_PTD0 &LPSPI1_SIN_PTD1
		     &LPSPI1_SOUT_PTD2 &LPSPI1_PCS0_PTD3>;
};

&dac0 {
	status = "okay";
	pinctrl-0 = <&DAC0_OUT_PTE9>;
};

&adc0 {
	status = "okay";
	sample-time = <12>;
	pinctrl-0 = <&ADC0_SE0_PTA0 &ADC0_SE1_PTA1 &ADC0_SE12_PTC14>;
};

&temp0 {
	status = "okay";
};

&flexcan0 {
	status = "okay";
	bus-speed = <125000>;
	pinctrl-0 = <&CAN0_RX_PTE4 &CAN0_TX_PTE5>;
};

&gpioa {
	status = "okay";
};

&gpiob {
	status = "okay";
};

&gpioc {
	status = "okay";
};

&gpiod {
	status = "okay";
};

&gpioe {
	status = "okay";
};

&edma {
	status = "okay";
};

&flash0 {

	partitions {
		compatible = "fixed-partitions";
		#address-cells = <1>;
		#size-cells = <1>;

		boot_partition: partition@0 {
			label = "mcuboot";
			reg = <0x00000000 0xc000>;
		};
		slot0_partition: partition@c000 {
			label = "image-0";
			reg = <0x0000c000 0x32000>;
		};
		slot1_partition: partition@3e000 {
			label = "image-1";
			reg = <0x0003e000 0x32000>;
		};
		scratch_partition: partition@70000 {
			label = "image-scratch";
			reg = <0x00070000 0xa000>;
		};
		storage_partition: partition@7a000 {
			label = "storage";
			reg = <0x0007a000 0x00006000>;
		};
	};
};