Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 | /* * Copyright (c) 2020 Nordic Semiconductor ASA * * SPDX-License-Identifier: Apache-2.0 */ /dts-v1/; #include <nordic/nrf5340_cpunet_qkaa.dtsi> / { model = "Nordic NRF5340 DK NRF5340 Network"; compatible = "nordic,nrf5340-dk-nrf5340-cpunet"; chosen { zephyr,console = &uart0; zephyr,shell-uart = &uart0; zephyr,uart-mcumgr = &uart0; zephyr,bt-mon-uart = &uart0; zephyr,bt-c2h-uart = &uart0; zephyr,sram = &sram1; zephyr,flash = &flash1; zephyr,code-partition = &slot0_partition; }; leds { compatible = "gpio-leds"; led0: led_0 { gpios = <&gpio0 28 GPIO_ACTIVE_LOW>; label = "Green LED 0"; }; led1: led_1 { gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; label = "Green LED 1"; }; led2: led_2 { gpios = <&gpio0 30 GPIO_ACTIVE_LOW>; label = "Green LED 2"; }; led3: led_3 { gpios = <&gpio0 31 GPIO_ACTIVE_LOW>; label = "Green LED 3"; }; }; buttons { compatible = "gpio-keys"; button0: button_0 { gpios = <&gpio0 23 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>; label = "Push button 1"; }; button1: button_1 { gpios = <&gpio0 24 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>; label = "Push button 2"; }; button2: button_2 { gpios = <&gpio0 8 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>; label = "Push button 3"; }; button3: button_3 { gpios = <&gpio0 9 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>; label = "Push button 4"; }; }; arduino_header: connector { compatible = "arduino-header-r3"; #gpio-cells = <2>; gpio-map-mask = <0xffffffff 0xffffffc0>; gpio-map-pass-thru = <0 0x3f>; gpio-map = <0 0 &gpio0 4 0>, /* A0 */ <1 0 &gpio0 5 0>, /* A1 */ <2 0 &gpio0 6 0>, /* A2 */ <3 0 &gpio0 7 0>, /* A3 */ <4 0 &gpio0 25 0>, /* A4 */ <5 0 &gpio0 26 0>, /* A5 */ <6 0 &gpio1 0 0>, /* D0 */ <7 0 &gpio1 1 0>, /* D1 */ <8 0 &gpio1 4 0>, /* D2 */ <9 0 &gpio1 5 0>, /* D3 */ <10 0 &gpio1 6 0>, /* D4 */ <11 0 &gpio1 7 0>, /* D5 */ <12 0 &gpio1 8 0>, /* D6 */ <13 0 &gpio1 9 0>, /* D7 */ <14 0 &gpio1 10 0>, /* D8 */ <15 0 &gpio1 11 0>, /* D9 */ <16 0 &gpio1 12 0>, /* D10 */ <17 0 &gpio1 13 0>, /* D11 */ <18 0 &gpio1 14 0>, /* D12 */ <19 0 &gpio1 15 0>, /* D13 */ <20 0 &gpio1 2 0>, /* D14 */ <21 0 &gpio1 3 0>; /* D15 */ }; /* These aliases are provided for compatibility with samples */ aliases { led0 = &led0; led1 = &led1; led2 = &led2; led3 = &led3; sw0 = &button0; sw1 = &button1; sw2 = &button2; sw3 = &button3; bootloader-led0 = &led0; }; }; &gpiote { status = "okay"; }; &gpio0 { status = "okay"; }; &gpio1 { status = "okay"; }; &uart0 { status = "okay"; current-speed = <115200>; tx-pin = <33>; rx-pin = <32>; rts-pin = <11>; cts-pin = <10>; }; arduino_serial: &uart0{}; arduino_i2c: &i2c0 { compatible = "nordic,nrf-twim"; /* Cannot be used together with uart0. */ /* status = "okay"; */ sda-pin = <34>; scl-pin = <35>; }; arduino_spi: &spi0 { compatible = "nordic,nrf-spim"; /* Cannot be used together with uart0. */ /* status = "okay"; */ sck-pin = <47>; miso-pin = <46>; mosi-pin = <45>; cs-gpios = <&arduino_header 16 GPIO_ACTIVE_LOW>; /* D10 */ }; &timer0 { status = "okay"; }; &timer1 { status = "okay"; }; &timer2 { status = "okay"; }; &flash1 { partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; boot_partition: partition@0 { label = "mcuboot"; reg = <0x00000000 0xc000>; }; slot0_partition: partition@c000 { label = "image-0"; reg = <0x0000C000 0x12000>; }; slot1_partition: partition@1e000 { label = "image-1"; reg = <0x0001E000 0x12000>; }; scratch_partition: partition@30000 { label = "image-scratch"; reg = <0x00030000 0xa000>; }; storage_partition: partition@3a000 { label = "storage"; reg = <0x0003a000 0x6000>; }; }; }; /* Include shared RAM configuration file */ #include "nrf5340_shared_sram_planning_conf.dts" |