Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 | /*
* Copyright (c) 2020 Kalyan Sriram <coder.kalyan@gmail.com>
*
* SPDX-License-Identifier: Apache-2.0
*/
/dts-v1/;
#include <st/f4/stm32f401Xe.dtsi>
#include <st/f4/stm32f401c(d-e)ux-pinctrl.dtsi>
/ {
model = "WeAct Studio Black Pill V3.0 Board";
compatible = "weact,blackpill-f401ce";
chosen {
zephyr,console = &usart1;
zephyr,shell-uart = &usart1;
zephyr,sram = &sram0;
zephyr,flash = &flash0;
};
leds {
compatible = "gpio-leds";
user_led: led {
gpios = <&gpioc 13 GPIO_ACTIVE_LOW>;
label = "User LED";
};
};
gpio_keys {
compatible = "gpio-keys";
user_button: button {
label = "KEY";
gpios = <&gpioa 0 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
};
};
aliases {
led0 = &user_led;
sw0 = &user_button;
};
};
&flash0 {
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
boot_partition: partition@0 {
label = "mcuboot";
reg = <0x00000000 0x00008000>;
read-only;
};
/*
* The flash starting at offset 0x00008000 and ending at
* offset 0x0001ffff (sectors 2 through 4) is reserved for
* use by the application.
*/
slot0_partition: partition@20000 {
label = "image-0";
reg = <0x00020000 0x00020000>;
};
slot1_partition: partition@40000 {
label = "image-1";
reg = <0x00040000 0x00020000>;
};
scratch_partition: partition@60000 {
label = "image-scratch";
reg = <0x00060000 0x00020000>;
};
};
};
&timers4 {
status = "okay";
pwm4: pwm {
status = "okay";
pinctrl-0 = <&tim4_ch1_pb6 &tim4_ch2_pb7>;
};
};
&usart1 {
pinctrl-0 = <&usart1_tx_pa9 &usart1_rx_pa10>;
status = "okay";
current-speed = <115200>;
};
&i2c1 {
pinctrl-0 = <&i2c1_scl_pb8 &i2c1_sda_pb9>;
status = "okay";
clock-frequency = <I2C_BITRATE_FAST>;
};
&spi1 {
pinctrl-0 = <&spi1_sck_pa5 &spi1_nss_pa4
&spi1_miso_pa6 &spi1_mosi_pa7>;
status = "okay";
};
&rtc {
status = "okay";
};
&usbotg_fs {
pinctrl-0 = <&usb_otg_fs_dm_pa11 &usb_otg_fs_dp_pa12>;
status = "okay";
};
&adc1 {
pinctrl-0 = <&adc1_in1_pa1>;
status = "okay";
};
|