Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 | /* * Copyright (c) 2018 Georgij Cernysiov * * SPDX-License-Identifier: Apache-2.0 */ #include <st/l4/stm32l4.dtsi> / { soc { pinctrl: pin-controller@48000000 { gpiod: gpio@48000c00 { compatible = "st,stm32-gpio"; gpio-controller; #gpio-cells = <2>; reg = <0x48000c00 0x400>; clocks = <&rcc STM32_CLOCK_BUS_AHB2 0x00000008>; label = "GPIOD"; }; gpioe: gpio@48001000 { compatible = "st,stm32-gpio"; gpio-controller; #gpio-cells = <2>; reg = <0x48001000 0x400>; clocks = <&rcc STM32_CLOCK_BUS_AHB2 0x00000010>; label = "GPIOE"; }; }; usb: usb@40006800 { compatible = "st,stm32-usb"; reg = <0x40006800 0x40000>; interrupts = <67 0>; interrupt-names = "usb"; num-bidir-endpoints = <8>; ram-size = <1024>; phys = <&usb_fs_phy>; clocks = <&rcc STM32_CLOCK_BUS_APB1 0x04000000>; status = "disabled"; label = "USB"; }; i2c2: i2c@40005800 { compatible = "st,stm32-i2c-v2"; clock-frequency = <I2C_BITRATE_STANDARD>; #address-cells = <1>; #size-cells = <0>; reg = <0x40005800 0x400>; clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00400000>; interrupts = <33 0>, <34 0>; interrupt-names = "event", "error"; status = "disabled"; label= "I2C_2"; }; i2c4: i2c@40008400 { compatible = "st,stm32-i2c-v2"; clock-frequency = <I2C_BITRATE_STANDARD>; #address-cells = <1>; #size-cells = <0>; reg = <0x40008400 0x400>; clocks = <&rcc STM32_CLOCK_BUS_APB1_2 0x00000002>; interrupts = <83 0>, <84 0>; interrupt-names = "event", "error"; status = "disabled"; label= "I2C_4"; }; spi2: spi@40003800 { compatible = "st,stm32-spi-fifo", "st,stm32-spi"; #address-cells = <1>; #size-cells = <0>; reg = <0x40003800 0x400>; clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00004000>; interrupts = <36 5>; status = "disabled"; label = "SPI_2"; }; spi3: spi@40003c00 { compatible = "st,stm32-spi-fifo", "st,stm32-spi"; #address-cells = <1>; #size-cells = <0>; reg = <0x40003c00 0x400>; clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00008000>; interrupts = <51 5>; status = "disabled"; label = "SPI_3"; }; usart3: serial@40004800 { compatible = "st,stm32-usart", "st,stm32-uart"; reg = <0x40004800 0x400>; clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00040000>; interrupts = <39 0>; status = "disabled"; label = "UART_3"; }; uart4: serial@40004c00 { compatible = "st,stm32-uart"; reg = <0x40004c00 0x400>; clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00080000>; interrupts = <52 0>; status = "disabled"; label = "UART_4"; }; timers3: timers@40000400 { compatible = "st,stm32-timers"; reg = <0x40000400 0x400>; clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00000002>; interrupts = <29 0>; interrupt-names = "global"; status = "disabled"; label = "TIMERS_3"; pwm { compatible = "st,stm32-pwm"; status = "disabled"; st,prescaler = <10000>; label = "PWM_3"; #pwm-cells = <3>; }; }; }; usb_fs_phy: usbphy { compatible = "usb-nop-xceiv"; #phy-cells = <0>; label = "USB_FS_PHY"; }; }; |