Boot Linux faster!

Check our new training course

Boot Linux faster!

Check our new training course
and Creative Commons CC-BY-SA
lecture and lab materials

Bootlin logo

Elixir Cross Referencer

  1
  2
  3
  4
  5
  6
  7
  8
  9
 10
 11
 12
 13
 14
 15
 16
 17
 18
 19
 20
 21
 22
 23
 24
 25
 26
 27
 28
 29
 30
 31
 32
 33
 34
 35
 36
 37
 38
 39
 40
 41
 42
 43
 44
 45
 46
 47
 48
 49
 50
 51
 52
 53
 54
 55
 56
 57
 58
 59
 60
 61
 62
 63
 64
 65
 66
 67
 68
 69
 70
 71
 72
 73
 74
 75
 76
 77
 78
 79
 80
 81
 82
 83
 84
 85
 86
 87
 88
 89
 90
 91
 92
 93
 94
 95
 96
 97
 98
 99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
/*
 * Copyright (c) 2019 Derek Hageman <hageman@inthat.cloud>
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#define DT_DRV_COMPAT atmel_sam0_eic

#include <device.h>
#include <soc.h>
#include <drivers/interrupt_controller/sam0_eic.h>
#include "intc_sam0_eic_priv.h"

struct sam0_eic_line_assignment {
	uint8_t pin : 5;
	uint8_t port : 2;
	uint8_t enabled : 1;
};

struct sam0_eic_port_data {
	sam0_eic_callback_t cb;
	void *data;
};

struct sam0_eic_data {
	struct sam0_eic_port_data ports[PORT_GROUPS];
	struct sam0_eic_line_assignment lines[EIC_EXTINT_NUM];
};

#define DEV_DATA(dev) \
	((struct sam0_eic_data *const)(dev)->data)

static void wait_synchronization(void)
{
#ifdef REG_EIC_SYNCBUSY
	while (EIC->SYNCBUSY.reg) {
	}
#else
	while (EIC->STATUS.bit.SYNCBUSY) {
	}
#endif
}

static inline void set_eic_enable(bool on)
{
#ifdef REG_EIC_CTRLA
	EIC->CTRLA.bit.ENABLE = on;
#else
	EIC->CTRL.bit.ENABLE = on;
#endif
}

static void sam0_eic_isr(const struct device *dev)
{
	struct sam0_eic_data *const dev_data = DEV_DATA(dev);
	uint16_t bits = EIC->INTFLAG.reg;
	uint32_t line_index;

	/* Acknowledge all interrupts */
	EIC->INTFLAG.reg = bits;

	/* No clz on M0, so just do a quick test */
#if __CORTEX_M >= 3
	line_index = __CLZ(__RBIT(bits));
	bits >>= line_index;
#else
	if (bits & 0xFF) {
		line_index = 0;
	} else {
		line_index = 8;
		bits >>= 8;
	}
#endif

	/*
	 * Map the EIC lines to the port pin masks based on which port is
	 * selected in the line data.
	 */
	for (; bits; bits >>= 1, line_index++) {
		if (!(bits & 1)) {
			continue;
		}

		/*
		 * These could be aggregated together into one call, but
		 * usually on a single one will be set, so just call them
		 * one by one.
		 */
		struct sam0_eic_line_assignment *line_assignment =
			&dev_data->lines[line_index];
		struct sam0_eic_port_data *port_data =
			&dev_data->ports[line_assignment->port];

		port_data->cb(BIT(line_assignment->pin), port_data->data);
	}
}

int sam0_eic_acquire(int port, int pin, enum sam0_eic_trigger trigger,
		     bool filter, sam0_eic_callback_t cb, void *data)
{
	const struct device *dev = DEVICE_DT_INST_GET(0);
	struct sam0_eic_data *dev_data = dev->data;
	struct sam0_eic_port_data *port_data;
	struct sam0_eic_line_assignment *line_assignment;
	uint32_t mask;
	int line_index;
	int config_index;
	int config_shift;
	int key;
	uint32_t config;

	line_index = sam0_eic_map_to_line(port, pin);
	if (line_index < 0) {
		return line_index;
	}

	mask = BIT(line_index);
	config_index = line_index / 8;
	config_shift = (line_index % 8) * 4;

	/* Lock everything so it's safe to reconfigure */
	key = irq_lock();
	/* Disable the EIC for reconfiguration */
	set_eic_enable(0);

	line_assignment = &dev_data->lines[line_index];

	/* Check that the required line is available */
	if (line_assignment->enabled) {
		if (line_assignment->port != port ||
		    line_assignment->pin != pin) {
			goto err_in_use;
		}
	}

	/* Set the EIC configuration data */
	port_data = &dev_data->ports[port];
	port_data->cb = cb;
	port_data->data = data;
	line_assignment->pin = pin;
	line_assignment->port = port;
	line_assignment->enabled = 1;

	config = EIC->CONFIG[config_index].reg;
	config &= ~(0xF << config_shift);
	switch (trigger) {
	case SAM0_EIC_RISING:
		config |= EIC_CONFIG_SENSE0_RISE << config_shift;
		break;
	case SAM0_EIC_FALLING:
		config |= EIC_CONFIG_SENSE0_FALL << config_shift;
		break;
	case SAM0_EIC_BOTH:
		config |= EIC_CONFIG_SENSE0_BOTH << config_shift;
		break;
	case SAM0_EIC_HIGH:
		config |= EIC_CONFIG_SENSE0_HIGH << config_shift;
		break;
	case SAM0_EIC_LOW:
		config |= EIC_CONFIG_SENSE0_LOW << config_shift;
		break;
	}

	if (filter) {
		config |= EIC_CONFIG_FILTEN0 << config_shift;
	}

	/* Apply the config to the EIC itself */
	EIC->CONFIG[config_index].reg = config;

	set_eic_enable(1);
	wait_synchronization();
	/*
	 * Errata: The EIC generates a spurious interrupt for the newly
	 * enabled pin after being enabled, so clear it before re-enabling
	 * the IRQ.
	 */
	EIC->INTFLAG.reg = mask;
	irq_unlock(key);
	return 0;

err_in_use:
	set_eic_enable(1);
	wait_synchronization();
	irq_unlock(key);
	return -EBUSY;
}

static bool sam0_eic_check_ownership(int port, int pin, int line_index)
{
	const struct device *dev = DEVICE_DT_INST_GET(0);
	struct sam0_eic_data *dev_data = dev->data;
	struct sam0_eic_line_assignment *line_assignment =
		&dev_data->lines[line_index];

	if (!line_assignment->enabled) {
		return false;
	}

	if (line_assignment->port != port ||
	    line_assignment->pin != pin) {
		return false;
	}

	return true;
}

int sam0_eic_release(int port, int pin)
{
	const struct device *dev = DEVICE_DT_INST_GET(0);
	struct sam0_eic_data *dev_data = dev->data;
	uint32_t mask;
	int line_index;
	int config_index;
	int config_shift;
	int key;

	line_index = sam0_eic_map_to_line(port, pin);
	if (line_index < 0) {
		return line_index;
	}

	mask = BIT(line_index);
	config_index = line_index / 8;
	config_shift = (line_index % 8) * 4;

	/* Lock everything so it's safe to reconfigure */
	key = irq_lock();
	/* Disable the EIC */
	set_eic_enable(0);
	wait_synchronization();

	/*
	 * Check to make sure the requesting actually owns the line and do
	 * nothing if it does not.
	 */
	if (!sam0_eic_check_ownership(port, pin, line_index)) {
		goto done;
	}

	dev_data->lines[line_index].enabled = 0;

	/* Clear the EIC config, including the trigger condition */
	EIC->CONFIG[config_index].reg &= ~(0xF << config_shift);

	/* Clear any pending interrupt for it */
	EIC->INTENCLR.reg = mask;
	EIC->INTFLAG.reg = mask;

done:
	set_eic_enable(1);
	wait_synchronization();
	irq_unlock(key);
	return 0;
}

int sam0_eic_enable_interrupt(int port, int pin)
{
	uint32_t mask;
	int line_index;

	line_index = sam0_eic_map_to_line(port, pin);
	if (line_index < 0) {
		return line_index;
	}

	if (!sam0_eic_check_ownership(port, pin, line_index)) {
		return -EBUSY;
	}

	mask = BIT(line_index);
	EIC->INTFLAG.reg = mask;
	EIC->INTENSET.reg = mask;

	return 0;
}

int sam0_eic_disable_interrupt(int port, int pin)
{
	uint32_t mask;
	int line_index;

	line_index = sam0_eic_map_to_line(port, pin);
	if (line_index < 0) {
		return line_index;
	}

	if (!sam0_eic_check_ownership(port, pin, line_index)) {
		return -EBUSY;
	}

	mask = BIT(line_index);
	EIC->INTENCLR.reg = mask;
	EIC->INTFLAG.reg = mask;

	return 0;
}

uint32_t sam0_eic_interrupt_pending(int port)
{
	const struct device *dev = DEVICE_DT_INST_GET(0);
	struct sam0_eic_data *dev_data = dev->data;
	struct sam0_eic_line_assignment *line_assignment;
	uint32_t set = EIC->INTFLAG.reg;
	uint32_t mask = 0;

	for (int line_index = 0; line_index < EIC_EXTINT_NUM; line_index++) {
		line_assignment = &dev_data->lines[line_index];

		if (!line_assignment->enabled) {
			continue;
		}

		if (line_assignment->port != port) {
			continue;
		}

		if (!(set & BIT(line_index))) {
			continue;
		}

		mask |= BIT(line_assignment->pin);
	}

	return mask;
}


#define SAM0_EIC_IRQ_CONNECT(n)						\
	do {								\
		IRQ_CONNECT(DT_INST_IRQ_BY_IDX(0, n, irq),		\
			    DT_INST_IRQ_BY_IDX(0, n, priority),		\
			    sam0_eic_isr, DEVICE_DT_INST_GET(0), 0);	\
		irq_enable(DT_INST_IRQ_BY_IDX(0, n, irq));		\
	} while (0)

static int sam0_eic_init(const struct device *dev)
{
	ARG_UNUSED(dev);

#ifdef MCLK
	/* Enable the EIC clock in APBAMASK */
	MCLK->APBAMASK.reg |= MCLK_APBAMASK_EIC;

	/* Enable the GCLK */
	GCLK->PCHCTRL[EIC_GCLK_ID].reg = GCLK_PCHCTRL_GEN_GCLK0 |
					 GCLK_PCHCTRL_CHEN;
#else
	/* Enable the EIC clock in PM */
	PM->APBAMASK.bit.EIC_ = 1;

	/* Enable the GCLK */
	GCLK->CLKCTRL.reg = GCLK_CLKCTRL_ID_EIC | GCLK_CLKCTRL_GEN_GCLK0 |
			    GCLK_CLKCTRL_CLKEN;
#endif

#if DT_INST_IRQ_HAS_CELL(0, irq)
	SAM0_EIC_IRQ_CONNECT(0);
#endif
#if DT_INST_IRQ_HAS_IDX(0, 1)
	SAM0_EIC_IRQ_CONNECT(1);
#endif
#if DT_INST_IRQ_HAS_IDX(0, 2)
	SAM0_EIC_IRQ_CONNECT(2);
#endif
#if DT_INST_IRQ_HAS_IDX(0, 3)
	SAM0_EIC_IRQ_CONNECT(3);
#endif
#if DT_INST_IRQ_HAS_IDX(0, 4)
	SAM0_EIC_IRQ_CONNECT(4);
#endif
#if DT_INST_IRQ_HAS_IDX(0, 5)
	SAM0_EIC_IRQ_CONNECT(5);
#endif
#if DT_INST_IRQ_HAS_IDX(0, 6)
	SAM0_EIC_IRQ_CONNECT(6);
#endif
#if DT_INST_IRQ_HAS_IDX(0, 7)
	SAM0_EIC_IRQ_CONNECT(7);
#endif
#if DT_INST_IRQ_HAS_IDX(0, 8)
	SAM0_EIC_IRQ_CONNECT(8);
#endif
#if DT_INST_IRQ_HAS_IDX(0, 9)
	SAM0_EIC_IRQ_CONNECT(9);
#endif
#if DT_INST_IRQ_HAS_IDX(0, 10)
	SAM0_EIC_IRQ_CONNECT(10);
#endif
#if DT_INST_IRQ_HAS_IDX(0, 11)
	SAM0_EIC_IRQ_CONNECT(11);
#endif
#if DT_INST_IRQ_HAS_IDX(0, 12)
	SAM0_EIC_IRQ_CONNECT(12);
#endif
#if DT_INST_IRQ_HAS_IDX(0, 13)
	SAM0_EIC_IRQ_CONNECT(13);
#endif
#if DT_INST_IRQ_HAS_IDX(0, 14)
	SAM0_EIC_IRQ_CONNECT(14);
#endif
#if DT_INST_IRQ_HAS_IDX(0, 15)
	SAM0_EIC_IRQ_CONNECT(15);
#endif

	set_eic_enable(1);
	wait_synchronization();

	return 0;
}

static struct sam0_eic_data eic_data;
DEVICE_DT_INST_DEFINE(0, sam0_eic_init,
	      device_pm_control_nop, &eic_data, NULL,
	      PRE_KERNEL_1, CONFIG_KERNEL_INIT_PRIORITY_DEFAULT,
	      NULL);