Loading...
# Configure JTAG cable # EM Starter Kit has built-in FT2232 chip, which is similar to Digilent HS-1. adapter driver ftdi ftdi_vid_pid 0x0403 0x6010 # channel 1 does not have any functionality ftdi_channel 0 # just TCK TDI TDO TMS, no reset ftdi_layout_init 0x0088 0x008b reset_config none # Only specify FTDI serial number if it is specified via # "set _ZEPHYR_BOARD_SERIAL 12345" before reading this script if { [info exists _ZEPHYR_BOARD_SERIAL] } { ftdi_serial $_ZEPHYR_BOARD_SERIAL } # EM11D reportedly requires 5 MHz. Other cores and board can work faster. adapter speed 5000 # ARCs support only JTAG. transport select jtag # Configure FPGA. This script supports both LX45 and LX150. source [find target/snps_em_sk_fpga.cfg] |