Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 | /*
* Copyright (c) 2020 Ruuvi Innovations Ltd (Oy)
*
* SPDX-License-Identifier: Apache-2.0
*/
/dts-v1/;
#include <nordic/nrf52832_qfaa.dtsi>
/ {
model = "Ruuvi RuuviTag";
compatible = "ruuvi,ruuvitag";
chosen {
zephyr,console = &uart0;
zephyr,shell-uart = &uart0;
zephyr,uart-mcumgr = &uart0;
zephyr,bt-mon-uart = &uart0;
zephyr,bt-c2h-uart = &uart0;
zephyr,sram = &sram0;
zephyr,flash = &flash0;
zephyr,code-partition = &slot0_partition;
};
/* These aliases are provided for compatibility with samples */
aliases {
led0 = &led0;
led1 = &led1;
sw0 = &button0;
};
leds {
compatible = "gpio-leds";
led0: led_0 {
gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
label = "Red LED 0";
};
led1: led_1 {
gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
label = "Green LED 1";
};
};
buttons {
compatible = "gpio-keys";
button0: button_0 {
gpios = <&gpio0 13 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
label = "Push button switch 0";
};
};
};
&adc {
status = "okay";
};
&gpiote {
status = "okay";
};
&gpio0 {
status = "okay";
};
&uart0 {
status = "okay";
compatible = "nordic,nrf-uart";
current-speed = <115200>;
tx-pin = <5>;
rx-pin = <4>;
cts-pin = <31>;
rts-pin = <30>;
};
&spi0 {
compatible = "nordic,nrf-spi";
status = "okay";
sck-pin = <29>;
mosi-pin = <25>;
miso-pin = <28>;
cs-gpios = <&gpio0 3 GPIO_ACTIVE_LOW>, <&gpio0 8 GPIO_ACTIVE_LOW>;
bme280@0 {
compatible = "bosch,bme280";
reg = <0>;
spi-max-frequency = <10000000>;
label= "BME280";
};
lis2dh12: lis2dh12@1 {
compatible = "st,lis2dh", "st,lis2dh12";
reg = <1>;
spi-max-frequency = <10000000>;
irq-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>, <&gpio0 6 GPIO_ACTIVE_HIGH>;
label = "LIS2DH12-ACCEL";
};
};
&flash0 {
/*
* For more information, see:
* https://docs.zephyrproject.org/latest/guides/dts/legacy-macros.html#legacy-flash-partitions
*/
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
boot_partition: partition@0 {
label = "mcuboot";
reg = <0x00000000 0xc000>;
};
slot0_partition: partition@c000 {
label = "image-0";
reg = <0x0000C000 0x32000>;
};
slot1_partition: partition@3e000 {
label = "image-1";
reg = <0x0003E000 0x32000>;
};
scratch_partition: partition@70000 {
label = "image-scratch";
reg = <0x00070000 0xa000>;
};
/*
* The flash starting at 0x0007a000 and ending at
* 0x0007ffff (sectors 122-127) is reserved for use
* by the application.
* Storage partition will be used by FCB/LittleFS/NVS
* if enabled.
*/
storage_partition: partition@7a000 {
label = "storage";
reg = <0x0007a000 0x00006000>;
};
};
};
|