Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 | /*
* Copyright (c) 2020 Laird Connectivity
*
* SPDX-License-Identifier: Apache-2.0
*/
/dts-v1/;
#include <nordic/nrf52840_qiaa.dtsi>
/ {
model = "Laird Sentrius BT510 Sensor";
compatible = "lairdconnect,bt510";
chosen {
zephyr,console = &uart0;
zephyr,shell-uart = &uart0;
zephyr,uart-mcumgr = &uart0;
zephyr,bt-mon-uart = &uart0;
zephyr,bt-c2h-uart = &uart0;
zephyr,sram = &sram0;
zephyr,flash = &flash0;
zephyr,code-partition = &slot0_partition;
};
leds {
compatible = "gpio-leds";
led1a: led_1a {
gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
label = "Red LED 1A";
};
led1b: led_1b {
gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
label = "Green LED 1B";
};
};
buttons {
compatible = "gpio-keys";
button1: button_1 {
gpios = <&gpio1 10 GPIO_PULL_UP>;
label = "Push button switch 1 (SW1)";
};
};
ids {
compatible = "gpio-keys";
id0: id_0 {
gpios = <&gpio1 2 GPIO_PULL_UP>;
label = "ID 0";
};
id1: id_1 {
gpios = <&gpio1 1 GPIO_PULL_UP>;
label = "ID 1";
};
id2: id_2 {
gpios = <&gpio0 25 GPIO_PULL_UP>;
label = "ID 2";
};
};
tm {
compatible = "gpio-keys";
tm0: tm_0 {
gpios = <&gpio0 3 GPIO_PULL_UP>;
label = "Test mode (TM)";
};
};
mag {
compatible = "gpio-keys";
mag0: mag_0 {
compatible = "honeywell,sm351lt";
gpios = <&gpio1 14 0>;
label = "SM351LT_0";
};
};
/* These aliases are provided for compatibility with samples */
aliases {
led0 = &led1a;
led1 = &led1b;
sw0 = &button1;
};
};
&adc {
status = "okay";
};
&gpiote {
status = "okay";
};
&gpio0 {
status = "okay";
};
&gpio1 {
status = "okay";
};
&uart0 {
compatible = "nordic,nrf-uart";
current-speed = <115200>;
status = "okay";
tx-pin = <6>;
rx-pin = <8>;
};
&i2c0 {
compatible = "nordic,nrf-twi";
status = "okay";
sda-pin = <26>;
scl-pin = <27>;
lis2dh12@18 {
compatible = "st,lis2dh12", "st,lis2dh";
reg = <0x18>;
irq-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>,
<&gpio1 12 GPIO_ACTIVE_HIGH>;
label = "LIS2DH12";
};
si7055@40 {
compatible = "silabs,si7055";
reg = <0x40>;
label = "SI7055";
};
};
&flash0 {
/*
* For more information, see:
* http://docs.zephyrproject.org/latest/guides/dts/index.html#flash-partitions
*/
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
/* 96K */
boot_partition: partition@0 {
label = "mcuboot";
reg = <0x000000000 0x00018000>;
};
/* 396K */
slot0_partition: partition@18000 {
label = "image-0";
reg = <0x00018000 0x000063000>;
};
/* 396K */
slot1_partition: partition@7b000 {
label = "image-1";
reg = <0x0007b000 0x000063000>;
};
/* 8K */
scratch_partition: partition@de000 {
label = "image-scratch";
reg = <0x000de000 0x00002000>;
};
/*
* The flash starting at 0x000e0000 and ending at
* 0x000fffff is reserved for use by the application.
*/
/*
* Storage partition will be used by FCB/LittleFS/NVS
* if enabled.
*/
/* 128K */
storage_partition: partition@e0000 {
label = "storage";
reg = <0x000e0000 0x00020000>;
};
};
};
|