Boot Linux faster!

Check our new training course

Boot Linux faster!

Check our new training course
and Creative Commons CC-BY-SA
lecture and lab materials

Bootlin logo

Elixir Cross Referencer

  1
  2
  3
  4
  5
  6
  7
  8
  9
 10
 11
 12
 13
 14
 15
 16
 17
 18
 19
 20
 21
 22
 23
 24
 25
 26
 27
 28
 29
 30
 31
 32
 33
 34
 35
 36
 37
 38
 39
 40
 41
 42
 43
 44
 45
 46
 47
 48
 49
 50
 51
 52
 53
 54
 55
 56
 57
 58
 59
 60
 61
 62
 63
 64
 65
 66
 67
 68
 69
 70
 71
 72
 73
 74
 75
 76
 77
 78
 79
 80
 81
 82
 83
 84
 85
 86
 87
 88
 89
 90
 91
 92
 93
 94
 95
 96
 97
 98
 99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
/*
 * Copyright (c) 2018 Linaro Limited
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#include <kernel.h>
#include <arch/cpu.h>
#include <init.h>
#include <device.h>
#include <soc.h>
#include <drivers/uart.h>

#if defined(CONFIG_SHARED_IRQ)
#include <shared_irq.h>
#endif

/*
 * UART PL011 register map structure
 */
struct pl011_regs {
	u32_t dr;			/* data register */
	union {
		u32_t rsr;
		u32_t ecr;
	};
	u32_t reserved_0[4];
	u32_t fr;			/* flags register */
	u32_t reserved_1;
	u32_t ilpr;
	u32_t ibrd;
	u32_t fbrd;
	u32_t lcr_h;
	u32_t cr;
	u32_t ifls;
	u32_t imsc;
	u32_t ris;
	u32_t mis;
	u32_t icr;
	u32_t dmacr;
};

/* Device data structure */
struct pl011_data {
	u32_t baud_rate;	/* Baud rate */
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
	uart_irq_callback_user_data_t irq_cb;
	void *irq_cb_data;
#if defined(CONFIG_UART_PL011_SHARED_IRQ)
	char *shared_irq_dev_name;
#endif
#endif
};

#define PL011_BIT_MASK(x, y) (((2 << x) - 1) << y)

/* PL011 Uart Flags Register */
#define PL011_FR_CTS		BIT(0)	/* clear to send - inverted */
#define PL011_FR_DSR		BIT(1)	/* data set ready - inverted */
#define PL011_FR_DCD		BIT(2)	/* data carrier detect - inverted */
#define PL011_FR_BUSY		BIT(3)	/* busy transmitting data */
#define PL011_FR_RXFE		BIT(4)	/* receive FIFO empty */
#define PL011_FR_TXFF		BIT(5)	/* transmit FIFO full */
#define PL011_FR_RXFF		BIT(6)	/* receive FIFO full */
#define PL011_FR_TXFE		BIT(7)	/* transmit FIFO empty */
#define PL011_FR_RI		BIT(8)	/* ring indicator - inverted */

/* PL011 Integer baud rate register */
#define PL011_IBRD_BAUD_DIVINT_MASK	0xff	/* 16 bits of divider */

/* PL011 Fractional baud rate register */
#define PL011_FBRD_BAUD_DIVFRAC		0x3f
#define PL011_FBRD_WIDTH		6u

/* PL011 Receive status register / error clear register */
#define PL011_RSR_ECR_FE	BIT(0)	/* framing error */
#define PL011_RSR_ECR_PE	BIT(1)	/* parity erorr */
#define PL011_RSR_ECR_BE	BIT(2)	/* break error */
#define PL011_RSR_ECR_OE	BIT(3)	/* overrun error */

#define PL011_RSR_ERROR_MASK	(PL011_RSR_ECR_FE | PL011_RSR_ECR_PE | \
		PL011_RSR_ECR_BE | PL011_RSR_ECR_OE)

/* PL011 Line Control Register  */
#define PL011_LCRH_BRK		BIT(0)	/* send break */
#define PL011_LCRH_PEN		BIT(1)	/* enable parity */
#define PL011_LCRH_EPS		BIT(2)	/* select even parity */
#define PL011_LCRH_STP2		BIT(3)	/* select two stop bits */
#define PL011_LCRH_FEN		BIT(4)	/* enable FIFOs */
#define PL011_LCRH_WLEN_SHIFT	5	/* word length */
#define PL011_LCRH_WLEN_WIDTH	2
#define PL011_LCRH_SPS		BIT(7)	/* stick parity bit */

#define PL011_LCRH_WLEN_SIZE(x) (x - 5)

#define PL011_LCRH_FORMAT_MASK	(PL011_LCRH_PEN | PL011_LCRH_EPS | \
		PL011_LCRH_SPS | \
		PL011_BIT_MASK(PL011_LCRH_WLEN_WIDTH, PL011_LCRH_WLEN_SHIFT))

#define PL011_LCRH_PARTIY_EVEN	(PL011_LCRH_PEN | PL011_LCRH_EPS)
#define PL011_LCRH_PARITY_ODD	(PL011_LCRH_PEN)
#define PL011_LCRH_PARITY_NONE	(0)

/* PL011 Control Register */
#define PL011_CR_UARTEN		BIT(0)	/* enable uart operations */
#define PL011_CR_SIREN		BIT(1)	/* enable  IrDA SIR */
#define PL011_CR_SIRLP		BIT(2)	/* IrDA SIR low power mode */
#define PL011_CR_LBE		BIT(7)	/* loop back enable */
#define PL011_CR_TXE		BIT(8)	/* transmit enable */
#define PL011_CR_RXE		BIT(9)	/* receive enable */
#define PL011_CR_DTR		BIT(10)	/* data transmit ready */
#define PL011_CR_RTS		BIT(11)	/* request to send */
#define PL011_CR_Out1		BIT(12)
#define PL011_CR_Out2		BIT(13)
#define PL011_CR_RTSEn		BIT(14)	/* RTS hw flow control enable */
#define PL011_CR_CTSEn		BIT(15)	/* CTS hw flow control enable */

/* PL011 Interrupt Fifo Level Select Register */
#define PL011_IFLS_TXIFLSEL_SHIFT	0	/* bits 2:0 */
#define PL011_IFLS_TXIFLSEL_WIDTH	3
#define PL011_IFLS_RXIFLSEL_SHIFT	3	/* bits 5:3 */
#define PL011_IFLS_RXIFLSEL_WIDTH	3

/* PL011 Interrupt Mask Set/Clear Register */
#define PL011_IMSC_RIMIM	BIT(0)	/* RTR modem interrupt mask */
#define PL011_IMSC_CTSMIM	BIT(1)	/* CTS modem interrupt mask */
#define PL011_IMSC_DCDMIM	BIT(2)	/* DCD modem interrupt mask */
#define PL011_IMSC_DSRMIM	BIT(3)	/* DSR modem interrupt mask */
#define PL011_IMSC_RXIM		BIT(4)	/* receive interrupt mask */
#define PL011_IMSC_TXIM		BIT(5)	/* transmit interrupt mask */
#define PL011_IMSC_RTIM		BIT(6)	/* receive timeout interrupt mask */
#define PL011_IMSC_FEIM		BIT(7)	/* framine error interrupt mask */
#define PL011_IMSC_PEIM		BIT(8)	/* parity error interrupt mask */
#define PL011_IMSC_BEIM		BIT(9)	/* break error interrupt mask */
#define PL011_IMSC_OEIM		BIT(10)	/* overrun error interrutpt mask */

#define PL011_IMSC_ERROR_MASK	(PL011_IMSC_FEIM | \
		PL011_IMSC_PEIM | PL011_IMSC_BEIM | \
		PL011_IMSC_OEIM)

#define PL011_IMSC_MASK_ALL (PL011_IMSC_OEIM | PL011_IMSC_BEIM | \
		PL011_IMSC_PEIM | PL011_IMSC_FEIM | \
		PL011_IMSC_RIMIM | PL011_IMSC_CTSMIM | \
		PL011_IMSC_DCDMIM | PL011_IMSC_DSRMIM | \
		PL011_IMSC_RXIM | PL011_IMSC_TXIM | \
		PL011_IMSC_RTIM)

#define DEV_CFG(dev) \
	((const struct uart_device_config * const)(dev)->config->config_info)
#define DEV_DATA(dev) \
	((struct pl011_data *)(dev)->driver_data)
#define PL011_REGS(dev) \
	((volatile struct pl011_regs  *)(DEV_CFG(dev))->base)

static void pl011_enable(struct device *dev)
{
	PL011_REGS(dev)->cr |=  PL011_CR_UARTEN;
}

static void pl011_disable(struct device *dev)
{
	PL011_REGS(dev)->cr &= ~PL011_CR_UARTEN;
}

static void pl011_enable_fifo(struct device *dev)
{
	PL011_REGS(dev)->lcr_h |= PL011_LCRH_FEN;
}

static void pl011_disable_fifo(struct device *dev)
{
	PL011_REGS(dev)->lcr_h &= ~PL011_LCRH_FEN;
}

static int pl011_set_baudrate(struct device *dev,
			      u32_t clk, u32_t baudrate)
{
	/* Avoiding float calculations, bauddiv is left shifted by 6 */
	u64_t bauddiv = (((u64_t)clk) << PL011_FBRD_WIDTH)
				/ (baudrate * 16U);

	/* Valid bauddiv value
	 * uart_clk (min) >= 16 x baud_rate (max)
	 * uart_clk (max) <= 16 x 65535 x baud_rate (min)
	 */
	if ((bauddiv < (1u << PL011_FBRD_WIDTH))
		|| (bauddiv > (65535u << PL011_FBRD_WIDTH))) {
		return -EINVAL;
	}

	PL011_REGS(dev)->ibrd = bauddiv >> PL011_FBRD_WIDTH;
	PL011_REGS(dev)->fbrd = bauddiv & ((1u << PL011_FBRD_WIDTH) - 1u);

	__DMB();

	/* In order to internally update the contents of ibrd or fbrd, a
	 * lcr_h write must always be performed at the end
	 * ARM DDI 0183F, Pg 3-13
	 */
	PL011_REGS(dev)->lcr_h = PL011_REGS(dev)->lcr_h;

	return 0;
}

static bool pl011_is_readable(struct device *dev)
{
	if ((PL011_REGS(dev)->cr & PL011_CR_UARTEN) &&
	    (PL011_REGS(dev)->cr & PL011_CR_RXE) &&
	   ((PL011_REGS(dev)->fr & PL011_FR_RXFE) == 0U)) {
		return true;
	}

	return false;
}

static int pl011_poll_in(struct device *dev, unsigned char *c)
{
	if (!pl011_is_readable(dev)) {
		return -1;
	}

	/* got a character */
	*c = (unsigned char)PL011_REGS(dev)->dr;

	return PL011_REGS(dev)->rsr & PL011_RSR_ERROR_MASK;
}

static void pl011_poll_out(struct device *dev,
					     unsigned char c)
{
	/* Wait for space in FIFO */
	while (PL011_REGS(dev)->fr & PL011_FR_TXFF) {
		; /* Wait */
	}

	/* Send a character */
	PL011_REGS(dev)->dr = (u32_t)c;
}

#ifdef CONFIG_UART_INTERRUPT_DRIVEN
static int pl011_fifo_fill(struct device *dev,
				    const u8_t *tx_data, int len)
{
	u8_t num_tx = 0U;

	while (!(PL011_REGS(dev)->fr & PL011_FR_TXFF) &&
	       (len - num_tx > 0)) {
		PL011_REGS(dev)->dr = tx_data[num_tx++];
	}
	return num_tx;
}

static int pl011_fifo_read(struct device *dev,
				    u8_t *rx_data, const int len)
{
	u8_t num_rx = 0U;

	while ((len - num_rx > 0) &&
	       !(PL011_REGS(dev)->fr & PL011_FR_RXFE)) {
		rx_data[num_rx++] = PL011_REGS(dev)->dr;
	}

	return num_rx;
}

static void pl011_irq_tx_enable(struct device *dev)
{
	PL011_REGS(dev)->imsc |= PL011_IMSC_TXIM;
}

static void pl011_irq_tx_disable(struct device *dev)
{
	PL011_REGS(dev)->imsc &= ~PL011_IMSC_TXIM;
}

static int pl011_irq_tx_complete(struct device *dev)
{
	/* check for TX FIFO empty */
	return PL011_REGS(dev)->fr & PL011_FR_TXFE;
}

static int pl011_irq_tx_ready(struct device *dev)
{
	return ((PL011_REGS(dev)->cr & PL011_CR_TXE) &&
		(PL011_REGS(dev)->imsc & PL011_IMSC_TXIM) &&
		pl011_irq_tx_complete(dev));
}

static void pl011_irq_rx_enable(struct device *dev)
{
	PL011_REGS(dev)->imsc |= PL011_IMSC_RXIM |
				 PL011_IMSC_RTIM;
}

static void pl011_irq_rx_disable(struct device *dev)
{
	PL011_REGS(dev)->imsc &= ~(PL011_IMSC_RXIM |
				   PL011_IMSC_RTIM);
}

static int pl011_irq_rx_ready(struct device *dev)
{
	return ((PL011_REGS(dev)->cr & PL011_CR_RXE) &&
		(PL011_REGS(dev)->imsc & PL011_IMSC_RXIM) &&
		(!(PL011_REGS(dev)->fr & PL011_FR_RXFE)));
}

static void pl011_irq_err_enable(struct device *dev)
{
	/* enable framing, parity, break, and overrun */
	PL011_REGS(dev)->imsc |= PL011_IMSC_ERROR_MASK;
}

static void pl011_irq_err_disable(struct device *dev)
{
	PL011_REGS(dev)->imsc &= ~PL011_IMSC_ERROR_MASK;
}

static int pl011_irq_is_pending(struct device *dev)
{
	return pl011_irq_rx_ready(dev) || pl011_irq_tx_ready(dev);
}

static int pl011_irq_update(struct device *dev)
{
	return 1;
}

static void pl011_irq_callback_set(struct device *dev,
					    uart_irq_callback_user_data_t cb,
					    void *cb_data)
{
	DEV_DATA(dev)->irq_cb = cb;
	DEV_DATA(dev)->irq_cb_data = cb_data;
}
#endif /* CONFIG_UART_INTERRUPT_DRIVEN */

static const struct uart_driver_api pl011_driver_api = {
	.poll_in = pl011_poll_in,
	.poll_out = pl011_poll_out,
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
	.fifo_fill = pl011_fifo_fill,
	.fifo_read = pl011_fifo_read,
	.irq_tx_enable = pl011_irq_tx_enable,
	.irq_tx_disable = pl011_irq_tx_disable,
	.irq_tx_ready = pl011_irq_tx_ready,
	.irq_rx_enable = pl011_irq_rx_enable,
	.irq_rx_disable = pl011_irq_rx_disable,
	.irq_tx_complete = pl011_irq_tx_complete,
	.irq_rx_ready = pl011_irq_rx_ready,
	.irq_err_enable = pl011_irq_err_enable,
	.irq_err_disable = pl011_irq_err_disable,
	.irq_is_pending = pl011_irq_is_pending,
	.irq_update = pl011_irq_update,
	.irq_callback_set = pl011_irq_callback_set,
#endif /* CONFIG_UART_INTERRUPT_DRIVEN */
};

static int pl011_init(struct device *dev)
{
	int ret;
	u32_t lcrh;

	/* disable the uart */
	pl011_disable(dev);
	pl011_disable_fifo(dev);

	/* Set baud rate */
	ret = pl011_set_baudrate(dev, DEV_CFG(dev)->sys_clk_freq,
				      DEV_DATA(dev)->baud_rate);
	if (ret != 0) {
		return ret;
	}

	/* Setting the default character format */
	lcrh = PL011_REGS(dev)->lcr_h & ~(PL011_LCRH_FORMAT_MASK);
	lcrh &= ~(BIT(0) | BIT(7));
	lcrh |= PL011_LCRH_WLEN_SIZE(8) << PL011_LCRH_WLEN_SHIFT;
	PL011_REGS(dev)->lcr_h = lcrh;

	/* Enabling the FIFOs */
	pl011_enable_fifo(dev);

	/* initialize all IRQs as masked */
	PL011_REGS(dev)->imsc = 0U;
	PL011_REGS(dev)->icr = PL011_IMSC_MASK_ALL;

	PL011_REGS(dev)->dmacr = 0U;
	__ISB();
	PL011_REGS(dev)->cr &= ~(BIT(14) | BIT(15) | BIT(1));
	PL011_REGS(dev)->cr |= PL011_CR_RXE | PL011_CR_TXE;
	__ISB();

#ifdef CONFIG_UART_INTERRUPT_DRIVEN
	DEV_CFG(dev)->irq_config_func(dev);
#endif
	pl011_enable(dev);

	return 0;
}

#ifdef CONFIG_UART_INTERRUPT_DRIVEN
void pl011_isr(void *arg)
{
	struct device *dev = arg;
	struct pl011_data *data = DEV_DATA(dev);

	/* Verify if the callback has been registered */
	if (data->irq_cb) {
		data->irq_cb(data->irq_cb_data);
	}
}
#endif /* CONFIG_UART_INTERRUPT_DRIVEN */


#ifdef CONFIG_UART_PL011_PORT0

#ifdef CONFIG_UART_INTERRUPT_DRIVEN
static void pl011_irq_config_func_0(struct device *dev);
#endif

static struct uart_device_config pl011_cfg_port_0 = {
	.base = (u8_t *)DT_PL011_PORT0_BASE_ADDRESS,
	.sys_clk_freq = DT_PL011_PORT0_CLOCK_FREQUENCY,
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
	.irq_config_func = pl011_irq_config_func_0,
#endif
};

static struct pl011_data pl011_data_port_0 = {
	.baud_rate = DT_PL011_PORT0_BAUD_RATE,
#if defined(CONFIG_UART_PL011_SHARED_IRQ)
	.shared_irq_dev_name = DT_INST_0_SHARED_IRQ_LABEL,
#endif
};

DEVICE_AND_API_INIT(pl011_port_0,
		    DT_PL011_PORT0_NAME,
		    &pl011_init,
		    &pl011_data_port_0,
		    &pl011_cfg_port_0, PRE_KERNEL_1,
		    CONFIG_KERNEL_INIT_PRIORITY_DEVICE,
		    &pl011_driver_api);

#ifdef CONFIG_UART_INTERRUPT_DRIVEN
static void pl011_irq_config_func_0(struct device *dev)
{
#if defined(CONFIG_UART_PL011_PORT0_SHARED_IRQ)
	struct device *shared_irq_dev;

	shared_irq_dev = device_get_binding(DEV_DATA(dev)->shared_irq_dev_name);
	__ASSERT(shared_irq_dev != NULL, "Failed to get shared irq");
	shared_irq_isr_register(shared_irq_dev, (isr_t)pl011_isr, dev);
	shared_irq_enable(shared_irq_dev, dev);
#else
	IRQ_CONNECT(DT_PL011_PORT0_IRQ_TX,
		    DT_PL011_PORT0_IRQ_PRI,
		    pl011_isr,
		    DEVICE_GET(pl011_port_0),
		    0);
	irq_enable(DT_PL011_PORT0_IRQ_TX);

	IRQ_CONNECT(DT_PL011_PORT0_IRQ_RX,
		    DT_PL011_PORT0_IRQ_PRI,
		    pl011_isr,
		    DEVICE_GET(pl011_port_0),
		    0);
	irq_enable(DT_PL011_PORT0_IRQ_RX);

	IRQ_CONNECT(DT_PL011_PORT0_IRQ_RXTIM,
		    DT_PL011_PORT0_IRQ_PRI,
		    pl011_isr,
		    DEVICE_GET(pl011_port_0),
		    0);
	irq_enable(DT_PL011_PORT0_IRQ_RXTIM);
#endif
}
#endif

#endif /* CONFIG_UART_PL011_PORT0 */

#ifdef CONFIG_UART_PL011_PORT1

#ifdef CONFIG_UART_INTERRUPT_DRIVEN
static void pl011_irq_config_func_1(struct device *dev);
#endif

static struct uart_device_config pl011_cfg_port_1 = {
	.base = (u8_t *)DT_PL011_PORT1_BASE_ADDRESS,
	.sys_clk_freq = DT_PL011_PORT1_CLOCK_FREQUENCY,
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
	.irq_config_func = pl011_irq_config_func_1,
#endif
};

static struct pl011_data pl011_data_port_1 = {
	.baud_rate = DT_PL011_PORT1_BAUD_RATE,
#if defined(CONFIG_UART_PL011_SHARED_IRQ)
	.shared_irq_dev_name = DT_INST_1_SHARED_IRQ_LABEL,
#endif
};

DEVICE_AND_API_INIT(pl011_port_1,
		    DT_PL011_PORT1_NAME,
		    &pl011_init,
		    &pl011_data_port_1,
		    &pl011_cfg_port_1, PRE_KERNEL_1,
		    CONFIG_KERNEL_INIT_PRIORITY_DEVICE,
		    &pl011_driver_api);

#ifdef CONFIG_UART_INTERRUPT_DRIVEN
static void pl011_irq_config_func_1(struct device *dev)
{
#if defined(CONFIG_UART_PL011_PORT1_SHARED_IRQ)
	struct device *shared_irq_dev;

	shared_irq_dev = device_get_binding(DEV_DATA(dev)->shared_irq_dev_name);
	__ASSERT(shared_irq_dev != NULL, "Failed to get shared irq");
	shared_irq_isr_register(shared_irq_dev, (isr_t)pl011_isr, dev);
	shared_irq_enable(shared_irq_dev, dev);
#else
	IRQ_CONNECT(DT_PL011_PORT1_IRQ_TX,
		    DT_PL011_PORT1_IRQ_PRI,
		    pl011_isr,
		    DEVICE_GET(pl011_port_1),
		    0);
	irq_enable(DT_PL011_PORT1_IRQ_TX);

	IRQ_CONNECT(DT_PL011_PORT1_IRQ_RX,
		    DT_PL011_PORT1_IRQ_PRI,
		    pl011_isr,
		    DEVICE_GET(pl011_port_1),
		    0);
	irq_enable(DT_PL011_PORT1_IRQ_RX);

	IRQ_CONNECT(DT_PL011_PORT1_IRQ_RXTIM,
		    DT_PL011_PORT1_IRQ_PRI,
		    pl011_isr,
		    DEVICE_GET(pl011_port_1),
		    0);
	irq_enable(DT_PL011_PORT1_IRQ_RXTIM);
#endif
}
#endif

#endif /* CONFIG_UART_PL011_PORT1 */