Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 | /* * Copyright (c) 2018, NXP * * SPDX-License-Identifier: Apache-2.0 */ /dts-v1/; #include <nxp/nxp_rt1064.dtsi> / { model = "NXP MIMXRT1064-EVK board"; compatible = "nxp,mimxrt1064"; aliases { gpio-1= &gpio1; gpio-2= &gpio2; gpio-3= &gpio3; gpio-4= &gpio4; gpio-5= &gpio5; uart-1 = &uart1; led0 = &green_led; pwm-led0 = &green_pwm_led; sw0 = &user_button; eth = ð }; chosen { zephyr,console = &uart1; zephyr,shell-uart = &uart1; }; sdram0: memory@80000000 { /* Micron MT48LC16M16A2B4-6AIT:G */ device_type = "memory"; compatible = "mmio-sram"; reg = <0x80000000 0x2000000>; }; leds { compatible = "gpio-leds"; green_led: led-1 { gpios = <&gpio1 9 GPIO_INT_ACTIVE_LOW>; label = "User LD1"; }; }; pwmleds { compatible = "pwm-leds"; green_pwm_led: green_pwm_led { pwms = <&flexpwm2_pwm3 0>; }; }; gpio_keys { compatible = "gpio-keys"; user_button: button-1 { label = "User SW8"; gpios = <&gpio5 0 GPIO_INT_ACTIVE_LOW>; }; }; panel { compatible = "rocktech,rk043fn02h-ct"; port { lcd_panel_in: endpoint { remote-endpoint = <&lcd_panel_out>; }; }; }; }; arduino_i2c: &i2c1 {}; &lcdif1 { status = "okay"; port { lcd_panel_out: endpoint { remote-endpoint = <&lcd_panel_in>; }; }; }; &i2c1 { status = "okay"; mt9m114@48 { compatible = "aptina,mt9m114"; reg = <0x48>; label = "MT9M114"; status = "okay"; port { mt9m114_ep_out: endpoint { remote-endpoint = <&csi_ep_in>; }; }; }; }; &uart1 { status = "okay"; current-speed = <115200>; }; ð { status = "okay"; ptp { status = "okay"; }; }; &usbd1 { status = "okay"; }; &csi { status = "okay"; sensor-label = "MT9M114"; port { csi_ep_in: endpoint { remote-endpoint = <&mt9m114_ep_out>; }; }; }; |