Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 | /* * Copyright (c) 2019 Nordic Semiconductor ASA * * SPDX-License-Identifier: Apache-2.0 */ /dts-v1/; #include <nordic/nrf5340_cpunet_qkaa.dtsi> / { model = "Nordic NRF5340 Dev Kit Network"; compatible = "nordic,nrf5340-dk","nordic,nrf5340-cpunet-qkaa", "nordic,nrf5340-cpunet"; chosen { zephyr,console = &uart0; zephyr,shell-uart = &uart0; zephyr,uart-mcumgr = &uart0; zephyr,sram = &sram1; zephyr,flash = &flash1; zephyr,code-partition = &slot0_partition; }; leds { compatible = "gpio-leds"; led0: led_0 { gpios = <&gpio0 28 GPIO_INT_ACTIVE_LOW>; label = "Green LED 0"; }; led1: led_1 { gpios = <&gpio0 29 GPIO_INT_ACTIVE_LOW>; label = "Green LED 1"; }; led2: led_2 { gpios = <&gpio0 30 GPIO_INT_ACTIVE_LOW>; label = "Green LED 2"; }; led3: led_3 { gpios = <&gpio0 31 GPIO_INT_ACTIVE_LOW>; label = "Green LED 3"; }; buttons { compatible = "gpio-keys"; button0: button_0 { gpios = <&gpio0 23 GPIO_PUD_PULL_UP>; label = "Push button 1"; }; button1: button_1 { gpios = <&gpio0 24 GPIO_PUD_PULL_UP>; label = "Push button 2"; }; button2: button_2 { gpios = <&gpio0 8 GPIO_PUD_PULL_UP>; label = "Push button 3"; }; button3: button_3 { gpios = <&gpio0 9 GPIO_PUD_PULL_UP>; label = "Push button 4"; }; }; }; /* These aliases are provided for compatibility with samples */ aliases { led0 = &led0; led1 = &led1; led2 = &led2; led3 = &led3; sw0 = &button0; sw1 = &button1; sw2 = &button2; sw3 = &button3; }; }; &gpiote { status = "okay"; }; &gpio0 { status = "okay"; }; &gpio1 { status = "okay"; }; &uart0 { status = "okay"; current-speed = <115200>; tx-pin = <25>; rx-pin = <26>; rts-pin = <10>; cts-pin = <12>; }; &timer0 { status = "okay"; }; &timer1 { status = "okay"; }; &timer2 { status = "okay"; }; &flash1 { /* * For more information, see: * http://docs.zephyrproject.org/latest/guides/dts/index.html#flash-partitions */ partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; boot_partition: partition@1000000 { label = "mcuboot"; reg = <0x01000000 0xc000>; }; slot0_partition: partition@100c000 { label = "image-0"; reg = <0x0100C000 0x12000>; }; slot1_partition: partition@101e000 { label = "image-1"; reg = <0x0101E000 0x12000>; }; scratch_partition: partition@1030000 { label = "image-scratch"; reg = <0x01030000 0xa000>; }; storage_partition: partition@103a000 { label = "storage"; reg = <0x0103a000 0x6000>; }; }; }; /* Include shared RAM configuration file */ #include "nrf5340_dk_nrf5340_shared_sram_planning_conf.dts" |