Linux preempt-rt

Check our new training course

Real-Time Linux with PREEMPT_RT

Check our new training course
with Creative Commons CC-BY-SA
lecture and lab materials

Bootlin logo

Elixir Cross Referencer

/*
 * Copyright (c) 2019 Vestas Wind Systems A/S
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#include <arm/armv7-m.dtsi>
#include <dt-bindings/clock/kinetis_scg.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/i2c/i2c.h>

/ {
	aliases {
		rtc-0 = &rtc0;
		wdt-0 = &wdog0;
		uart-0 = &uart0;
		uart-1 = &uart1;
		uart-2 = &uart2;
		i2c-0 = &i2c0;
		i2c-1 = &i2c1;
		spi-0 = &spi0;
		spi-1 = &spi1;
		pinmux-a = &pinmux_a;
		pinmux-b = &pinmux_b;
		pinmux-c = &pinmux_c;
		pinmux-d = &pinmux_d;
		pinmux-e = &pinmux_e;
		gpio-a = &gpioa;
		gpio-b = &gpiob;
		gpio-c = &gpioc;
		gpio-d = &gpiod;
		gpio-e = &gpioe;
		adc-0 = &adc0;
		adc-1 = &adc1;
		adc-2 = &adc2;
		ftm-0 = &ftm0;
		ftm-1 = &ftm1;
		ftm-2 = &ftm2;
		ftm-3 = &ftm3;
	};

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		cpu@0 {
			device_type = "cpu";
			compatible = "arm,cortex-m4f";
			reg = <0>;
		};
	};

	soc {
		mpu: mpu@4000d000 {
			compatible = "nxp,kinetis-mpu";
			reg = <0x4000d000 0x1000>;
			status = "disabled";
		};

		sim: sim@40048000 {
			compatible = "nxp,kinetis-sim";
			reg = <0x40048000 0x1000>;
			label = "SIM";
		};

		scg: scg@40064000 {
			compatible = "nxp,kinetis-scg";
			reg = <0x40064000 0x1000>;
			label = "SCG";
			#clock-cells = <1>;
		};

		pmc: pmc@4007d000 {
			compatible = "fixed-clock";
			reg = <0x4007d000 0x1000>;
			label = "PMC";
			/* LPO clock */
			clock-frequency = <125000>;
			#clock-cells = <0>;
		};

		pcc: pcc@40065000 {
			compatible = "nxp,kinetis-pcc";
			reg = <0x40065000 0x1000>;
			label = "PCC";
			#clock-cells = <1>;
		};

		rtc0: rtc@4003d000 {
			compatible = "nxp,kinetis-rtc";
			reg = <0x4003d000 0x1000>;
			interrupts = <46 0>, <47 0>;
			interrupt-names = "alarm", "seconds";
			clock-frequency = <32768>;
			prescaler = <32768>;
			label = "RTC_0";
		};

		wdog0: watchdog@40052000 {
			compatible = "nxp,kinetis-wdog32";
			reg = <0x40052000 0x1000>;
			interrupts = <22 0>;
			clocks = <&pmc>;
			clk-source = <1>;
			clk-divider = <256>;
			label = "WDT_0";
		};

		flash_controller: flash-controller@40020000 {
			compatible = "nxp,kinetis-ftfe";
			label = "FLASH_CTRL";
			reg = <0x40020000 0x1000>;
			interrupts = <18 0>, <19 0>;
			interrupt-names = "command-complete", "read-collision";

			#address-cells = <1>;
			#size-cells = <1>;
		};

		uart0: uart@4006a000 {
			compatible = "nxp,kinetis-lpuart";
			reg = <0x4006a000 0x1000>;
			interrupts = <31 0>, <32 0>;
			interrupt-names = "transmit", "receive";
			clocks = <&pcc 0x1a8>;
			label = "UART_0";
			status = "disabled";
		};

		uart1: uart@4006b000 {
			compatible = "nxp,kinetis-lpuart";
			reg = <0x4006b000 0x1000>;
			interrupts = <33 0>, <34 0>;
			interrupt-names = "transmit", "receive";
			clocks = <&pcc 0x1ac>;
			label = "UART_1";
			status = "disabled";
		};

		uart2: uart@4006c000 {
			compatible = "nxp,kinetis-lpuart";
			reg = <0x4006c000 0x1000>;
			interrupts = <35 0>, <36 0>;
			interrupt-names = "transmit", "receive";
			clocks = <&pcc 0x1b0>;
			label = "UART_2";
			status = "disabled";
		};

		i2c0: i2c@40066000 {
			compatible = "nxp,imx-lpi2c";
			clock-frequency = <I2C_BITRATE_STANDARD>;
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x40066000 0x1000>;
			interrupts = <24 0>;
			clocks = <&pcc 0x198>;
			label = "I2C_0";
			status = "disabled";
		};

		i2c1: i2c@40067000 {
			compatible = "nxp,imx-lpi2c";
			clock-frequency = <I2C_BITRATE_STANDARD>;
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x40067000 0x1000>;
			interrupts = <25 0>;
			clocks = <&pcc 0x19c>;
			label = "I2C_1";
			status = "disabled";
		};

		spi0: spi@4002c000 {
			compatible = "nxp,imx-lpspi";
			reg = <0x4002c000 0x1000>;
			interrupts = <26 0>;
			clocks = <&pcc 0xb0>;
			label = "SPI_0";
			status = "disabled";
			#address-cells = <1>;
			#size-cells = <0>;
		};

		spi1: spi@4002d000 {
			compatible = "nxp,imx-lpspi";
			reg = <0x4002d000 0x1000>;
			interrupts = <27 0>;
			clocks = <&pcc 0xb4>;
			label = "SPI_1";
			status = "disabled";
			#address-cells = <1>;
			#size-cells = <0>;
		};

		can0: can@40024000 {
			compatible = "nxp,kinetis-flexcan";
			reg = <0x40024000 0x1000>;
			interrupts = <78 0>, <79 0>, <80 0>, <81 0>;
			interrupt-names = "warning", "error", "wake-up",
					  "mb-0-15";
			clocks = <&scg KINETIS_SCG_BUS_CLK>;
			clk-source = <1>;
			label = "CAN_0";
			sjw = <1>;
			prop-seg = <1>;
			phase-seg1 = <3>;
			phase-seg2 = <2>;
			status = "disabled";
			#address-cells = <1>;
			#size-cells = <0>;
		};

		can1: can@40025000 {
			compatible = "nxp,kinetis-flexcan";
			reg = <0x40025000 0x1000>;
			interrupts = <85 0>, <86 0>, <87 0>, <88 0>;
			interrupt-names = "warning", "error", "wake-up",
					  "mb-0-15";
			clocks = <&scg KINETIS_SCG_BUS_CLK>;
			clk-source = <1>;
			label = "CAN_1";
			sjw = <1>;
			prop-seg = <1>;
			phase-seg1 = <3>;
			phase-seg2 = <2>;
			status = "disabled";
			#address-cells = <1>;
			#size-cells = <0>;
		};

		pinmux_a: pinmux@40049000 {
			compatible = "nxp,kinetis-pinmux";
			reg = <0x40049000 0x1000>;
			clocks = <&pcc 0x124>;
		};

		pinmux_b: pinmux@4004a000 {
			compatible = "nxp,kinetis-pinmux";
			reg = <0x4004a000 0x1000>;
			clocks = <&pcc 0x128>;
		};

		pinmux_c: pinmux@4004b000 {
			compatible = "nxp,kinetis-pinmux";
			reg = <0x4004b000 0x1000>;
			clocks = <&pcc 0x12c>;
		};

		pinmux_d: pinmux@4004c000 {
			compatible = "nxp,kinetis-pinmux";
			reg = <0x4004c000 0x1000>;
			clocks = <&pcc 0x130>;
		};

		pinmux_e: pinmux@4004d000 {
			compatible = "nxp,kinetis-pinmux";
			reg = <0x4004d000 0x1000>;
			clocks = <&pcc 0x134>;
		};

		gpioa: gpio@400ff000 {
			compatible = "nxp,kinetis-gpio";
			reg = <0x400ff000 0x40>;
			interrupts = <59 2>;
			label = "GPIO_0";
			gpio-controller;
			#gpio-cells = <2>;
		};

		gpiob: gpio@400ff040 {
			compatible = "nxp,kinetis-gpio";
			reg = <0x400ff040 0x40>;
			interrupts = <60 2>;
			label = "GPIO_1";
			gpio-controller;
			#gpio-cells = <2>;
		};

		gpioc: gpio@400ff080 {
			compatible = "nxp,kinetis-gpio";
			reg = <0x400ff080 0x40>;
			interrupts = <61 2>;
			label = "GPIO_2";
			gpio-controller;
			#gpio-cells = <2>;
		};

		gpiod: gpio@400ff0c0 {
			compatible = "nxp,kinetis-gpio";
			reg = <0x400ff0c0 0x40>;
			interrupts = <62 2>;
			label = "GPIO_3";
			gpio-controller;
			#gpio-cells = <2>;
		};

		gpioe: gpio@400ff100 {
			compatible = "nxp,kinetis-gpio";
			reg = <0x400ff100 0x40>;
			interrupts = <63 2>;
			label = "GPIO_4";
			gpio-controller;
			#gpio-cells = <2>;
		};

		adc0: adc@4003b000 {
			compatible = "nxp,kinetis-adc12";
			reg = <0x4003b000 0x1000>;
			interrupts = <39 0>;
			clocks = <&pcc 0xec>;
			label = "ADC_0";
			clk-source = <0>;
			clk-divider = <1>;
			status = "disabled";
		};

		adc1: adc@40027000 {
			compatible = "nxp,kinetis-adc12";
			reg = <0x40027000 0x1000>;
			interrupts = <73 0>;
			clocks = <&pcc 0x9c>;
			label = "ADC_1";
			clk-source = <0>;
			clk-divider = <1>;
			status = "disabled";
		};

		adc2: adc@4003c000 {
			compatible = "nxp,kinetis-adc12";
			reg = <0x4003c000 0x1000>;
			interrupts = <74 0>;
			clocks = <&pcc 0xf0>;
			label = "ADC_2";
			clk-source = <0>;
			clk-divider = <1>;
			status = "disabled";
		};

		ftm0: pwm@40038000 {
			compatible = "nxp,kinetis-ftm";
			reg = <0x40038000 0x1000>;
			interrupts = <42 0>;
			clocks = <&pcc 0xe0>;
			label = "FTM_0";
			#pwm-cells = <2>;
			status = "disabled";
		};

		ftm1: pwm@40039000 {
			compatible = "nxp,kinetis-ftm";
			reg = <0x40039000 0x1000>;
			interrupts = <43 0>;
			clocks = <&pcc 0xe4>;
			label = "FTM_1";
			#pwm-cells = <2>;
			status = "disabled";
		};

		ftm2: pwm@4003a000 {
			compatible = "nxp,kinetis-ftm";
			reg = <0x4003a000 0x1000>;
			interrupts = <44 0>;
			clocks = <&pcc 0xe8>;
			label = "FTM_2";
			#pwm-cells = <2>;
			status = "disabled";
		};

		ftm3: pwm@40026000 {
			compatible = "nxp,kinetis-ftm";
			reg = <0x40026000 0x1000>;
			interrupts = <71 0>;
			clocks = <&pcc 0x98>;
			label = "FTM_3";
			#pwm-cells = <2>;
			status = "disabled";
		};
	};
};

&nvic {
	arm,num-irq-priority-bits = <4>;
};