Boot Linux faster!

Check our new training course

Boot Linux faster!

Check our new training course
and Creative Commons CC-BY-SA
lecture and lab materials

Bootlin logo

Elixir Cross Referencer

/*
 * Copyright (c) 2015 Intel Corporation.
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#include <errno.h>

#include <device.h>
#include <drivers/interrupt_controller/ioapic.h>
#include <drivers/counter.h>
#include <init.h>
#include <kernel.h>
#include <power/power.h>
#include <soc.h>
#include <sys/util.h>

#include "qm_isr.h"
#include "qm_rtc.h"

static void rtc_callback(void *user_data);
static counter_alarm_callback_t user_cb;

struct rtc_config {
	struct counter_config_info info;
};

struct rtc_data {
#ifdef CONFIG_RTC_QMSI_API_REENTRANCY
	struct k_sem sem;
#endif
#ifdef CONFIG_DEVICE_POWER_MANAGEMENT
	u32_t device_power_state;
#endif
};

#define RTC_HAS_CONTEXT_DATA \
	(CONFIG_RTC_QMSI_API_REENTRANCY || CONFIG_DEVICE_POWER_MANAGEMENT)

#if RTC_HAS_CONTEXT_DATA
static struct rtc_data rtc_context;
#define RTC_CONTEXT (&rtc_context)
#else
#define RTC_CONTEXT (NULL)
#endif /* RTC_HAS_CONTEXT_DATA */

#ifdef CONFIG_RTC_QMSI_API_REENTRANCY
#define RP_GET(dev) (&((struct rtc_data *)(dev->driver_data))->sem)
#else
#define RP_GET(dev) (NULL)
#endif

#ifdef CONFIG_DEVICE_POWER_MANAGEMENT

static void rtc_qmsi_set_power_state(struct device *dev, u32_t power_state)
{
	struct rtc_data *context = dev->driver_data;

	context->device_power_state = power_state;
}

static u32_t rtc_qmsi_get_power_state(struct device *dev)
{
	struct rtc_data *context = dev->driver_data;

	return context->device_power_state;
}
#else
#define rtc_qmsi_set_power_state(...)
#endif

static int rtc_qmsi_enable(struct device *dev)
{
	clk_periph_enable(CLK_PERIPH_RTC_REGISTER | CLK_PERIPH_CLK);

	return 0;
}

static int rtc_qmsi_disable(struct device *dev)
{
	clk_periph_disable(CLK_PERIPH_RTC_REGISTER);

	return 0;
}

static int rtc_qmsi_cancel_alarm(struct device *dev, u8_t chan_id)
{
	clk_periph_disable(CLK_PERIPH_RTC_REGISTER);

	return 0;
}

static int rtc_qmsi_set_top(struct device *dev,
			    const struct counter_top_cfg *cfg)
{
	const struct counter_config_info *info = dev->config->config_info;

	if ((cfg->ticks != info->max_top_value) ||
		!(cfg->flags & COUNTER_TOP_CFG_DONT_RESET)) {
		return -ENOTSUP;
	} else {
		return 0;
	}
}

static int rtc_qmsi_set_alarm(struct device *dev, u8_t chan_id,
				const struct counter_alarm_cfg *alarm_cfg)
{
	qm_rtc_config_t qm_cfg;
	int result = 0;

	qm_cfg.init_val = 0;
	qm_cfg.alarm_en = 1;
	qm_cfg.alarm_val = alarm_cfg->ticks;

	user_cb = alarm_cfg->callback;
	/* Casting callback type due different input parameter from QMSI
	 * compared aganst the Zephyr callback from void cb(struct device *dev)
	 * to void cb(void *)
	 */
	qm_cfg.callback = rtc_callback;
	qm_cfg.callback_data = (void *)alarm_cfg;

	/* Set prescaler value. Ideally, the divider should come from struct
	 * rtc_config instead. It's safe to use RTC_DIVIDER here for now since
	 * values defined by clk_rtc_div and by QMSI's clk_rtc_div_t match for
	 * both D2000 and SE.
	 */
	qm_cfg.prescaler = (clk_rtc_div_t)CONFIG_RTC_PRESCALER - 1;

	if (IS_ENABLED(CONFIG_RTC_QMSI_API_REENTRANCY)) {
		k_sem_take(RP_GET(dev), K_FOREVER);
	}

	if (qm_rtc_set_config(QM_RTC_0, &qm_cfg)) {
		result = -EIO;
	}

	if (IS_ENABLED(CONFIG_RTC_QMSI_API_REENTRANCY)) {
		k_sem_give(RP_GET(dev));
	}

	k_busy_wait(60);

	qm_rtc_set_alarm(QM_RTC_0, alarm_cfg->ticks);

	return result;
}

static u32_t rtc_qmsi_read(struct device *dev)
{
	return QM_RTC[QM_RTC_0]->rtc_ccvr;
}

static u32_t rtc_qmsi_get_pending_int(struct device *dev)
{
	return QM_RTC[QM_RTC_0]->rtc_stat;
}

static const struct counter_driver_api api = {
	.start = rtc_qmsi_enable,
	.stop = rtc_qmsi_disable,
	.read = rtc_qmsi_read,
	.set_top_value = rtc_qmsi_set_top,
	.set_alarm = rtc_qmsi_set_alarm,
	.cancel_alarm = rtc_qmsi_cancel_alarm,
	.get_pending_int = rtc_qmsi_get_pending_int,
};

static int rtc_qmsi_init(struct device *dev)
{
	if (IS_ENABLED(CONFIG_RTC_QMSI_API_REENTRANCY)) {
		k_sem_init(RP_GET(dev), 1, UINT_MAX);
	}

	IRQ_CONNECT(DT_RTC_0_IRQ, DT_RTC_0_IRQ_PRI,
		    qm_rtc_0_isr, NULL, DT_RTC_0_IRQ_FLAGS);

	/* Unmask RTC interrupt */
	irq_enable(DT_RTC_0_IRQ);

	/* Route RTC interrupt to the current core */
	QM_IR_UNMASK_INTERRUPTS(QM_INTERRUPT_ROUTER->rtc_0_int_mask);

	rtc_qmsi_set_power_state(dev, DEVICE_PM_ACTIVE_STATE);

	return 0;
}

#ifdef CONFIG_DEVICE_POWER_MANAGEMENT
static qm_rtc_context_t rtc_ctx;

static int rtc_suspend_device(struct device *dev)
{
	qm_rtc_save_context(QM_RTC_0, &rtc_ctx);

	rtc_qmsi_set_power_state(dev, DEVICE_PM_SUSPEND_STATE);

	return 0;
}

static int rtc_resume_device(struct device *dev)
{
	qm_rtc_restore_context(QM_RTC_0, &rtc_ctx);

	rtc_qmsi_set_power_state(dev, DEVICE_PM_ACTIVE_STATE);

	return 0;
}

/*
* Implements the driver control management functionality
* the *context may include IN data or/and OUT data
*/
static int rtc_qmsi_device_ctrl(struct device *dev, u32_t ctrl_command,
				void *context, device_pm_cb cb, void *arg)
{
	int ret = 0;

	if (ctrl_command == DEVICE_PM_SET_POWER_STATE) {
		if (*((u32_t *)context) == DEVICE_PM_SUSPEND_STATE) {
			ret = rtc_suspend_device(dev);
		} else if (*((u32_t *)context) == DEVICE_PM_ACTIVE_STATE) {
			ret = rtc_resume_device(dev);
		}
	} else if (ctrl_command == DEVICE_PM_GET_POWER_STATE) {
		*((u32_t *)context) = rtc_qmsi_get_power_state(dev);
	}

	if (cb) {
		cb(dev, ret, context, arg);
	}

	return ret;
}
#endif

static const struct rtc_config  rtc_conf_info = {
	.info = {
		.max_top_value = UINT32_MAX,
		.freq = 32768,
		.flags = COUNTER_CONFIG_INFO_COUNT_UP,
		.channels = 1,
	}
};

DEVICE_DEFINE(rtc, DT_RTC_0_NAME, &rtc_qmsi_init, rtc_qmsi_device_ctrl,
	      RTC_CONTEXT, &rtc_conf_info, POST_KERNEL,
	      CONFIG_KERNEL_INIT_PRIORITY_DEVICE, &api);

static void rtc_callback(void *user_data)
{
	const struct counter_alarm_cfg *cfg = user_data;

	if (user_cb) {
		(*user_cb)(DEVICE_GET(rtc), 0, cfg->ticks, user_data);
	}
}