Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 | /* * Copyright (c) 2017 Piotr Mienkowski * Copyright (c) 2017 Justin Watson * * SPDX-License-Identifier: Apache-2.0 */ /dts-v1/; #include <atmel/same70q21.dtsi> / { model = "Atmel SAM E70 Xplained board"; compatible = "atmel,sam_e70_xplained", "atmel,same70q21", "atmel,same70"; aliases { i2c-0 = &i2c0; i2c-1 = &i2c1; i2c-2 = &i2c2; led0 = &green_led; sw0 = &sw0_user_button; wdog = &wdog; }; chosen { zephyr,console = &usart1; zephyr,shell-uart = &usart1; zephyr,sram = &sram0; zephyr,flash = &flash0; zephyr,code-partition = &slot0_partition; }; leds { compatible = "gpio-leds"; green_led: led_0 { gpios = <&portc 8 0>; label = "User LED"; }; }; gpio_keys { compatible = "gpio-keys"; /* The switch is labeled SW300 in the schematic, and labeled * SW0 on the board, and labeld SW1 User Button on docs */ sw0_user_button: button_1 { label = "User Button"; gpios = <&porta 11 (GPIO_PUD_PULL_UP | GPIO_INT_ACTIVE_LOW)>; }; }; }; &cpu0 { clock-frequency = <300000000>; }; &adc0 { status = "okay"; }; &adc1 { status = "okay"; }; &i2c0 { status = "okay"; }; &i2c2 { status = "okay"; }; &spi0 { status = "okay"; }; &usart1 { current-speed = <115200>; status = "okay"; }; &wdog { status = "okay"; }; &usbhs { status = "okay"; }; &pwm0 { status = "okay"; }; &flash0 { /* * If chosen's zephyr,code-partition * is unset, the image will be linked * into the entire flash device. If * it points to an individual * partition, the code will be linked * to, and restricted to that * partition. */ partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; /* * The first half of sector 0 (64 kbytes) * is reserved for the bootloader */ boot_partition: partition@0 { label = "mcuboot"; reg = <0x0 0x00010000>; read-only; }; /* From sector 1 to sector 7 (included): slot0 (896 kbytes) */ slot0_partition: partition@20000 { label = "image-0"; reg = <0x0020000 0x000e0000>; }; /* From sector 8 to sector 14 (included): slot1 (896 kbytes) */ slot1_partition: partition@100000 { label = "image-1"; reg = <0x00100000 0x000e0000>; }; /* Sector 15: scratch (128 kbytes) */ scratch_partition: partition@1e0000 { label = "image-scratch"; reg = <0x001e0000 0x00020000>; }; }; }; |