Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 | # Kconfig.k64 - K64_FTM PWM configuration options # # # Copyright (c) 2016 Intel Corporation # Copyright (c) 2016 Wind River Systems, Inc. # # SPDX-License-Identifier: Apache-2.0 # ################################################ # K64 Flex Timer Module (FTM) ################################################ menuconfig PWM_K64_FTM bool "PWM with Freescale K64 Flex Timer Module (FTM)" depends on PWM && SOC_MK64F12 default n help Enable Pulse Width Modulation driver for Freescale K64 Flex Timer Module (FTM). if PWM_K64_FTM config SYS_LOG_PWM_K64_FTM_LEVEL int prompt "Sets log level for pwm_ftm driver" depends on PWM_K64_FTM default 0 help Sets log level for pwm_ftm driver. Levels are: - 0 OFF, do not write - 1 ERROR, only write SYS_LOG_ERR - 2 WARNING, write SYS_LOG_WRN in addition to previous level - 3 INFO, write SYS_LOG_INF in addition to previous levels - 4 DEBUG, write SYS_LOG_DBG in addition to previous levels #### FTM0 ##### config PWM_K64_FTM_0 bool "K64 FTM PWM Module 0" depends on PWM_K64_FTM default n help Enable config PWM options for FTM0 source module. config PWM_K64_FTM_0_DEV_NAME string "K64 FTM PWM Module 0 Device Name" depends on PWM_K64_FTM_0 default "PWM_0" help Specify the device name for the FTM0 source module. config PWM_K64_FTM_0_PRESCALE int "K64 FTM0 prescale value" default 1 depends on PWM_K64_FTM_0 help Specify the FTM timer prescale value. The valid values are 1, 2, 4, 8, 16, 32, 64, or 128. config PWM_K64_FTM_0_PERIOD int "K64 FTM0 period value" default 65535 depends on PWM_K64_FTM_0 help Specify the FTM0 PWM period in ticks menu "K64 FTM0 Clock Source" depends on PWM_K64_FTM_0 choice PWM_K64_FTM_0_CLOCK_SOURCE_CHOICE prompt "Choose the K64 FTM0 clock source" default PWM_K64_FTM_0_CLOCK_SOURCE_SYSTEM config PWM_K64_FTM_0_CLOCK_SOURCE_NONE bool "No clock selected (FTM counter disable)" config PWM_K64_FTM_0_CLOCK_SOURCE_SYSTEM bool "System clock" config PWM_K64_FTM_0_CLOCK_SOURCE_FIXED bool "Fixed Frequency Clock" config PWM_K64_FTM_0_CLOCK_SOURCE_EXTERNAL bool "External Clock" config PWM_K64_FTM_0_CLOCK_SOURCE_QUAD bool "Quadrature Decoder" endchoice endmenu config PWM_K64_FTM_0_CLOCK_SOURCE int # Omit prompt to signify "hidden" option depends on PWM_K64_FTM_0 default 0 if PWM_K64_FTM_0_CLOCK_SOURCE_NONE default 1 if PWM_K64_FTM_0_CLOCK_SOURCE_SYSTEM default 2 if PWM_K64_FTM_0_CLOCK_SOURCE_FIXED default 3 if PWM_K64_FTM_0_CLOCK_SOURCE_EXTERNAL default 4 if PWM_K64_FTM_0_CLOCK_SOURCE_QUAD help Specify K64 FTM0 clock source config PWM_K64_FTM_0_PHASE_ENABLE_0 bool "FTM0 Enable Phase for channel 0" depends on PWM_K64_FTM_0 default n help Allow a phase offset on FTM0 channel 0. This configures channels 0 and 1 to be in combine mode therefore channel 1 is not valid as an output signal. Note: phase is an unsupported feature. config PWM_K64_FTM_0_PHASE_ENABLE_2 bool "FTM0 Enable Phase for channel 2" depends on PWM_K64_FTM_0 default n help Allow a phase offset on FTM0 channel 2. This configures channels 2 and 3 to be in combine mode therefore channel 3 is not valid as an output signal. Note: phase is an unsupported feature. config PWM_K64_FTM_0_PHASE_ENABLE_4 bool "FTM0 Enable Phase for channel 4" depends on PWM_K64_FTM_0 default n help Allow a phase offset on FTM0 channel 4. This configures channels 4 and 5 to be in combine mode therefore channel 5 is not valid as an output signal. Note: phase is an unsupported feature. config PWM_K64_FTM_0_PHASE_ENABLE_6 bool "FTM0 Enable Phase for channel 6" depends on PWM_K64_FTM_0 default n help Allow a phase offset on FTM0 channel 6. This configures channels 6 and 7 to be in combine mode therefore channel 7 is not valid as an output signal. Note: phase is an unsupported feature. #### FTM1 ##### config PWM_K64_FTM_1 bool "K64 FTM PWM Module 1" depends on PWM_K64_FTM default n help Enable config PWM options for FTM1 source module. config PWM_K64_FTM_1_DEV_NAME string "K64 FTM PWM Module 1 Device Name" depends on PWM_K64_FTM_1 default "PWM_1" help Specify the device name for the FTM1 source module. config PWM_K64_FTM_1_PRESCALE int "FTM1 prescale value" default 1 depends on PWM_K64_FTM_1 help Specify the FTM1 timer prescale value. The valid values are 1, 2, 4, 8, 16, 32, 64, or 128 config PWM_K64_FTM_1_PERIOD int "FTM1 period value" default 65535 depends on PWM_K64_FTM_1 help Specify the FTM1 PWM period in ticks menu "K64 FTM1 Clock Source" depends on PWM_K64_FTM_1 choice PWM_K64_FTM_1_CLOCK_SOURCE_CHOICE prompt "Choose the FTM1 clock source" default PWM_K64_FTM_1_CLOCK_SOURCE_SYSTEM config PWM_K64_FTM_1_CLOCK_SOURCE_NONE bool "No clock selected (FTM counter disable)" config PWM_K64_FTM_1_CLOCK_SOURCE_SYSTEM bool "System clock" config PWM_K64_FTM_1_CLOCK_SOURCE_FIXED bool "Fixed Frequency Clock" config PWM_K64_FTM_1_CLOCK_SOURCE_EXTERNAL bool "External Clock" config PWM_K64_FTM_1_CLOCK_SOURCE_QUAD bool "Quadrature Decoder" endchoice endmenu config PWM_K64_FTM_1_CLOCK_SOURCE int # Omit prompt to signify "hidden" option depends on PWM_K64_FTM_1 default 0 if PWM_K64_FTM_1_CLOCK_SOURCE_NONE default 1 if PWM_K64_FTM_1_CLOCK_SOURCE_SYSTEM default 2 if PWM_K64_FTM_1_CLOCK_SOURCE_FIXED default 3 if PWM_K64_FTM_1_CLOCK_SOURCE_EXTERNAL default 4 if PWM_K64_FTM_1_CLOCK_SOURCE_QUAD help Specify K64 FTM1 clock source config PWM_K64_FTM_1_PHASE_ENABLE_0 bool "FTM1 Enable Phase for channel 0" depends on PWM_K64_FTM_1 default n help Allow a phase offset on FTM1 channel 0. This configures channels 0 and 1 to be in combine mode therefore channel 1 is not valid as an output signal. Note: phase is an unsupported feature. config PWM_FTM_1_PHASE_ENABLE_2 bool "FTM1 Enable Phase for channel 2" depends on PWM_K64_FTM_1 default n help Allow a phase offset on FTM1 channel 2. This configures channels 2 and 3 to be in combine mode therefore channel 3 is not valid as an output signal. Note: phase is an unsupported feature. config PWM_FTM_1_PHASE_ENABLE_4 bool "FTM1 Enable Phase for channel 4" depends on PWM_K64_FTM_1 default n help Allow a phase offset on FTM1 channel 4. This configures channels 4 and 5 to be in combine mode therefore channel 5 is not valid as an output signal. Note: phase is an unsupported feature. config PWM_FTM_1_PHASE_ENABLE_6 bool "FTM1 Enable Phase for channel 6" depends on PWM_K64_FTM_1 default n help Allow a phase offset on FTM1 channel 6. This configures channels 6 and 7 to be in combine mode therefore channel 7 is not valid as an output signal. Note: phase is an unsupported feature. #### FTM2 ##### config PWM_K64_FTM_2 bool "K64 FTM PWM Module 2" depends on PWM_K64_FTM default n help Enable config PWM options for FTM2 source module. config PWM_K64_FTM_2_DEV_NAME string "K64 FTM PWM Module 2 Device Name" depends on PWM_K64_FTM_2 default "PWM_2" help Specify the device name for the FTM2 source module. config PWM_K64_FTM_2_PRESCALE int "FTM2 prescale value" default 1 depends on PWM_K64_FTM_2 help Specify the FTM2 timer prescale value. The valid values are 1, 2, 4, 8, 16, 32, 64, or 128 config PWM_K64_FTM_2_PERIOD int "FTM2 period value" default 65535 depends on PWM_K64_FTM_2 help Specify the FTM2 PWM period in ticks menu "K64 FTM2 Clock Source" depends on PWM_K64_FTM_2 choice PWM_K64_FTM_2_CLOCK_SOURCE_CHOICE prompt "Choose the FTM2 clock source" default PWM_K64_FTM_2_CLOCK_SOURCE_SYSTEM config PWM_K64_FTM_2_CLOCK_SOURCE_NONE bool "No clock selected (FTM counter disable)" config PWM_K64_FTM_2_CLOCK_SOURCE_SYSTEM bool "System clock" config PWM_K64_FTM_2_CLOCK_SOURCE_FIXED bool "Fixed Frequency Clock" config PWM_K64_FTM_2_CLOCK_SOURCE_EXTERNAL bool "External Clock" config PWM_K64_FTM_2_CLOCK_SOURCE_QUAD bool "Quadrature Decoder" endchoice endmenu config PWM_K64_FTM_2_CLOCK_SOURCE int # Omit prompt to signify "hidden" option depends on PWM_K64_FTM_2 default 0 if PWM_K64_FTM_2_CLOCK_SOURCE_NONE default 1 if PWM_K64_FTM_2_CLOCK_SOURCE_SYSTEM default 2 if PWM_K64_FTM_2_CLOCK_SOURCE_FIXED default 3 if PWM_K64_FTM_2_CLOCK_SOURCE_EXTERNAL default 4 if PWM_K64_FTM_2_CLOCK_SOURCE_QUAD help Specify K64 FTM2 clock source config PWM_K64_FTM_2_PHASE_ENABLE_0 bool "FTM2 Enable Phase for channel 0" depends on PWM_K64_FTM_2 default n help Allow a phase offset on FTM2 channel 0. This configures channels 0 and 1 to be in combine mode therefore channel 1 is not valid as an output signal. Note: phase is an unsupported feature. config PWM_K64_FTM_2_PHASE_ENABLE_2 bool "FTM2 Enable Phase for channel 2" depends on PWM_K64_FTM_2 default n help Allow a phase offset on FTM2 channel 2. This configures channels 2 and 3 to be in combine mode therefore channel 3 is not valid as an output signal. Note: phase is an unsupported feature. config PWM_K64_FTM_2_PHASE_ENABLE_4 bool "FTM2 Enable Phase for channel 4" depends on PWM_K64_FTM_2 default n help Allow a phase offset on FTM2 channel 4. This configures channels 4 and 5 to be in combine mode therefore channel 5 is not valid as an output signal. Note: phase is an unsupported feature. config PWM_K64_FTM_2_PHASE_ENABLE_6 bool "FTM2 Enable Phase for channel 6" depends on PWM_K64_FTM_2 default n help Allow a phase offset on FTM2 channel 6. This configures channels 6 and 7 to be in combine mode therefore channel 7 is not valid as an output signal. Note: phase is an unsupported feature. #### FTM3 ##### config PWM_K64_FTM_3 bool "K64 FTM PWM Module 3" depends on PWM_K64_FTM default n help Enable config PWM options for K64 FTM3 source module. config PWM_K64_FTM_3_DEV_NAME string "K64 FTM PWM Module 3 Device Name" depends on PWM_K64_FTM_3 default "PWM_3" help Specify the device name for the FTM3 source module. config PWM_K64_FTM_3_PRESCALE int "FTM3 prescale value" default 3 depends on PWM_K64_FTM_3 help Specify the FTM timer prescale value. The valid values are 1, 2, 4, 8, 16, 32, 64, or 128 config PWM_K64_FTM_3_PERIOD int "FTM3 period value" default 65535 depends on PWM_K64_FTM_3 help Specify the FTM3 PWM period in ticks menu "K64 FTM3 Clock Source" depends on PWM_K64_FTM_3 choice PWM_K64_FTM_3_CLOCK_SOURCE_CHOICE prompt "Choose the FTM3 clock source" default PWM_K64_FTM_3_CLOCK_SOURCE_SYSTEM config PWM_K64_FTM_3_CLOCK_SOURCE_NONE bool "No clock selected (FTM counter disable)" config PWM_K64_FTM_3_CLOCK_SOURCE_SYSTEM bool "System clock" config PWM_K64_FTM_3_CLOCK_SOURCE_FIXED bool "Fixed Frequency Clock" config PWM_K64_FTM_3_CLOCK_SOURCE_EXTERNAL bool "External Clock" config PWM_K64_FTM_3_CLOCK_SOURCE_QUAD bool "Quadrature Decoder" endchoice endmenu config PWM_K64_FTM_3_CLOCK_SOURCE int # Omit prompt to signify "hidden" option depends on PWM_K64_FTM_3 default 0 if PWM_K64_FTM_3_CLOCK_SOURCE_NONE default 1 if PWM_K64_FTM_3_CLOCK_SOURCE_SYSTEM default 2 if PWM_K64_FTM_3_CLOCK_SOURCE_FIXED default 3 if PWM_K64_FTM_3_CLOCK_SOURCE_EXTERNAL default 4 if PWM_K64_FTM_3_CLOCK_SOURCE_QUAD help Specify K64 FTM3 clock source config PWM_K64_FTM_3_PHASE_ENABLE_0 bool "FTM3 Enable Phase for channel 0" depends on PWM_K64_FTM_3 default n help Allow a phase offset on FTM3 channel 0. This configures channels 0 and 1 to be in combine mode therefore channel 1 is not valid as an output signal. Note: phase is an unsupported feature. config PWM_K64_FTM_3_PHASE_ENABLE_2 bool "FTM3 Enable Phase for channel 2" depends on PWM_K64_FTM_3 default n help Allow a phase offset on FTM3 channel 2. This configures channels 2 and 3 to be in combine mode therefore channel 3 is not valid as an output signal. Note: phase is an unsupported feature. config PWM_K64_FTM_3_PHASE_ENABLE_4 bool "FTM3 Enable Phase for channel 4" depends on PWM_K64_FTM_3 default n help Allow a phase offset on FTM3 channel 4. This configures channels 4 and 5 to be in combine mode therefore channel 5 is not valid as an output signal. Note: phase is an unsupported feature. config PWM_K64_FTM_3_PHASE_ENABLE_6 bool "FTM3 Enable Phase for channel 6" depends on PWM_K64_FTM_3 default n help Allow a phase offset on FTM3 channel 6. This configures channels 6 and 7 to be in combine mode therefore channel 7 is not valid as an output signal. Note: phase is an unsupported feature. endif # PWM_K64_FTM |