/*
* Copyright (c) 2016 Open-RnD Sp. z o.o.
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <errno.h>
#include <kernel.h>
#include <device.h>
#include <soc.h>
#include <gpio.h>
#include <clock_control/stm32_clock_control.h>
#include <pinmux/stm32/pinmux_stm32.h>
#include <pinmux.h>
#include <misc/util.h>
#include <interrupt_controller/exti_stm32.h>
#include "gpio_stm32.h"
#include "gpio_utils.h"
/**
* @brief Common GPIO driver for STM32 MCUs. Each SoC must implement a
* SoC specific integration glue
*/
/**
* @brief EXTI interrupt callback
*/
static void gpio_stm32_isr(int line, void *arg)
{
struct device *dev = arg;
struct gpio_stm32_data *data = dev->driver_data;
if (BIT(line) & data->cb_pins) {
_gpio_fire_callbacks(&data->cb, dev, BIT(line));
}
}
/**
* @brief Configure pin or port
*/
static int gpio_stm32_config(struct device *dev, int access_op,
uint32_t pin, int flags)
{
const struct gpio_stm32_config *cfg = dev->config->config_info;
int pincfg;
int map_res;
if (access_op != GPIO_ACCESS_BY_PIN) {
return -ENOTSUP;
}
/* figure out if we can map the requested GPIO
* configuration
*/
map_res = stm32_gpio_flags_to_conf(flags, &pincfg);
if (map_res) {
return map_res;
}
if (stm32_gpio_configure(cfg->base, pin, pincfg, 0)) {
return -EIO;
}
if (flags & GPIO_INT) {
stm32_exti_set_callback(pin, gpio_stm32_isr, dev);
stm32_gpio_enable_int(cfg->port, pin);
if (flags & GPIO_INT_EDGE) {
int edge = 0;
if (flags & GPIO_INT_DOUBLE_EDGE) {
edge = STM32_EXTI_TRIG_RISING |
STM32_EXTI_TRIG_FALLING;
} else if (flags & GPIO_INT_ACTIVE_HIGH) {
edge = STM32_EXTI_TRIG_RISING;
} else {
edge = STM32_EXTI_TRIG_FALLING;
}
stm32_exti_trigger(pin, edge);
}
stm32_exti_enable(pin);
}
return 0;
}
/**
* @brief Set the pin or port output
*/
static int gpio_stm32_write(struct device *dev, int access_op,
uint32_t pin, uint32_t value)
{
const struct gpio_stm32_config *cfg = dev->config->config_info;
if (access_op != GPIO_ACCESS_BY_PIN) {
return -ENOTSUP;
}
return stm32_gpio_set(cfg->base, pin, value);
}
/**
* @brief Read the pin or port status
*/
static int gpio_stm32_read(struct device *dev, int access_op,
uint32_t pin, uint32_t *value)
{
const struct gpio_stm32_config *cfg = dev->config->config_info;
if (access_op != GPIO_ACCESS_BY_PIN) {
return -ENOTSUP;
}
*value = stm32_gpio_get(cfg->base, pin);
return 0;
}
static int gpio_stm32_manage_callback(struct device *dev,
struct gpio_callback *callback,
bool set)
{
struct gpio_stm32_data *data = dev->driver_data;
_gpio_manage_callback(&data->cb, callback, set);
return 0;
}
static int gpio_stm32_enable_callback(struct device *dev,
int access_op, uint32_t pin)
{
struct gpio_stm32_data *data = dev->driver_data;
if (access_op != GPIO_ACCESS_BY_PIN) {
return -ENOTSUP;
}
data->cb_pins |= BIT(pin);
return 0;
}
static int gpio_stm32_disable_callback(struct device *dev,
int access_op, uint32_t pin)
{
struct gpio_stm32_data *data = dev->driver_data;
if (access_op != GPIO_ACCESS_BY_PIN) {
return -ENOTSUP;
}
data->cb_pins &= ~BIT(pin);
return 0;
}
static const struct gpio_driver_api gpio_stm32_driver = {
.config = gpio_stm32_config,
.write = gpio_stm32_write,
.read = gpio_stm32_read,
.manage_callback = gpio_stm32_manage_callback,
.enable_callback = gpio_stm32_enable_callback,
.disable_callback = gpio_stm32_disable_callback,
};
/**
* @brief Initialize GPIO port
*
* Perform basic initialization of a GPIO port. The code will
* enable the clock for corresponding peripheral.
*
* @param dev GPIO device struct
*
* @return 0
*/
static int gpio_stm32_init(struct device *device)
{
const struct gpio_stm32_config *cfg = device->config->config_info;
/* enable clock for subsystem */
struct device *clk =
device_get_binding(STM32_CLOCK_CONTROL_NAME);
#if defined(CONFIG_SOC_SERIES_STM32F4X) || \
defined(CONFIG_CLOCK_CONTROL_STM32_CUBE)
clock_control_on(clk, (clock_control_subsys_t *) &cfg->pclken);
#else
clock_control_on(clk, cfg->clock_subsys);
#endif
return 0;
}
#if defined(CONFIG_CLOCK_CONTROL_STM32_CUBE)
#define GPIO_DEVICE_INIT(__name, __suffix, __base_addr, __port, __cenr, __bus) \
static const struct gpio_stm32_config gpio_stm32_cfg_## __suffix = { \
.base = (uint32_t *)__base_addr, \
.port = __port, \
.pclken = { .bus = __bus, .enr = __cenr } \
}; \
static struct gpio_stm32_data gpio_stm32_data_## __suffix; \
DEVICE_AND_API_INIT(gpio_stm32_## __suffix, \
__name, \
gpio_stm32_init, \
&gpio_stm32_data_## __suffix, \
&gpio_stm32_cfg_## __suffix, \
POST_KERNEL, \
CONFIG_KERNEL_INIT_PRIORITY_DEVICE, \
&gpio_stm32_driver);
#else
#ifndef CONFIG_SOC_SERIES_STM32F4X
/* TODO: Change F1 to work similarly to F4 */
#define GPIO_DEVICE_INIT(__name, __suffix, __base_addr, __port, __clock) \
static const struct gpio_stm32_config gpio_stm32_cfg_## __suffix = { \
.base = (uint32_t *)__base_addr, \
.port = __port, \
.clock_subsys = UINT_TO_POINTER(__clock) \
}; \
static struct gpio_stm32_data gpio_stm32_data_## __suffix; \
DEVICE_AND_API_INIT(gpio_stm32_## __suffix, \
__name, \
gpio_stm32_init, \
&gpio_stm32_data_## __suffix, \
&gpio_stm32_cfg_## __suffix, \
POST_KERNEL, \
CONFIG_KERNEL_INIT_PRIORITY_DEVICE, \
&gpio_stm32_driver);
#else /* CONFIG_SOC_SERIES_STM32F4X */
#define GPIO_DEVICE_INIT(__name, __suffix, __base_addr, __port, __cenr) \
static const struct gpio_stm32_config gpio_stm32_cfg_## __suffix = { \
.base = (uint32_t *)__base_addr, \
.port = __port, \
.pclken = { .bus = STM32F4X_CLOCK_BUS_AHB1, .enr = __cenr }, \
}; \
static struct gpio_stm32_data gpio_stm32_data_## __suffix; \
DEVICE_AND_API_INIT(gpio_stm32_## __suffix, \
__name, \
gpio_stm32_init, \
&gpio_stm32_data_## __suffix, \
&gpio_stm32_cfg_## __suffix, \
POST_KERNEL, \
CONFIG_KERNEL_INIT_PRIORITY_DEVICE, \
&gpio_stm32_driver);
#endif
#endif /* CONFIG_CLOCK_CONTROL_STM32_CUBE */
#ifdef CONFIG_GPIO_STM32_PORTA
GPIO_DEVICE_INIT("GPIOA", a, GPIOA_BASE, STM32_PORTA,
#ifdef CONFIG_CLOCK_CONTROL_STM32_CUBE
STM32_PERIPH_GPIOA, STM32_CLOCK_BUS_GPIO
#else
#ifdef CONFIG_SOC_SERIES_STM32F1X
STM32F10X_CLOCK_SUBSYS_IOPA
| STM32F10X_CLOCK_SUBSYS_AFIO
#elif CONFIG_SOC_SERIES_STM32F4X
STM32F4X_CLOCK_ENABLE_GPIOA
#endif
#endif /* CONFIG_CLOCK_CONTROL_STM32_CUBE */
);
#endif /* CONFIG_GPIO_STM32_PORTA */
#ifdef CONFIG_GPIO_STM32_PORTB
GPIO_DEVICE_INIT("GPIOB", b, GPIOB_BASE, STM32_PORTB,
#ifdef CONFIG_CLOCK_CONTROL_STM32_CUBE
STM32_PERIPH_GPIOB, STM32_CLOCK_BUS_GPIO
#else
#ifdef CONFIG_SOC_SERIES_STM32F1X
STM32F10X_CLOCK_SUBSYS_IOPB
| STM32F10X_CLOCK_SUBSYS_AFIO
#elif CONFIG_SOC_SERIES_STM32F4X
STM32F4X_CLOCK_ENABLE_GPIOB
#endif
#endif /* CONFIG_CLOCK_CONTROL_STM32_CUBE */
);
#endif /* CONFIG_GPIO_STM32_PORTB */
#ifdef CONFIG_GPIO_STM32_PORTC
GPIO_DEVICE_INIT("GPIOC", c, GPIOC_BASE, STM32_PORTC,
#ifdef CONFIG_CLOCK_CONTROL_STM32_CUBE
STM32_PERIPH_GPIOC, STM32_CLOCK_BUS_GPIO
#else
#ifdef CONFIG_SOC_SERIES_STM32F1X
STM32F10X_CLOCK_SUBSYS_IOPC
| STM32F10X_CLOCK_SUBSYS_AFIO
#elif CONFIG_SOC_SERIES_STM32F4X
STM32F4X_CLOCK_ENABLE_GPIOC
#endif
#endif /* CONFIG_CLOCK_CONTROL_STM32_CUBE */
);
#endif /* CONFIG_GPIO_STM32_PORTC */
#ifdef CONFIG_GPIO_STM32_PORTD
GPIO_DEVICE_INIT("GPIOD", d, GPIOD_BASE, STM32_PORTD,
#ifdef CONFIG_CLOCK_CONTROL_STM32_CUBE
STM32_PERIPH_GPIOD, STM32_CLOCK_BUS_GPIO
#else
#ifdef CONFIG_SOC_SERIES_STM32F1X
STM32F10X_CLOCK_SUBSYS_IOPD
| STM32F10X_CLOCK_SUBSYS_AFIO
#elif CONFIG_SOC_SERIES_STM32F4X
STM32F4X_CLOCK_ENABLE_GPIOD
#endif
#endif /* CONFIG_CLOCK_CONTROL_STM32_CUBE */
);
#endif /* CONFIG_GPIO_STM32_PORTD */
#ifdef CONFIG_GPIO_STM32_PORTE
GPIO_DEVICE_INIT("GPIOE", e, GPIOE_BASE, STM32_PORTE,
#ifdef CONFIG_CLOCK_CONTROL_STM32_CUBE
STM32_PERIPH_GPIOE, STM32_CLOCK_BUS_GPIO
#else
#ifdef CONFIG_SOC_SERIES_STM32F1X
STM32F10X_CLOCK_SUBSYS_IOPE
| STM32F10X_CLOCK_SUBSYS_AFIO
#elif CONFIG_SOC_SERIES_STM32F4X
STM32F4X_CLOCK_ENABLE_GPIOE
#endif
#endif /* CONFIG_CLOCK_CONTROL_STM32_CUBE */
);
#endif /* CONFIG_GPIO_STM32_PORTE */
#ifdef CONFIG_GPIO_STM32_PORTF
GPIO_DEVICE_INIT("GPIOF", f, GPIOF_BASE, STM32_PORTF,
STM32_PERIPH_GPIOF, STM32_CLOCK_BUS_GPIO);
#endif /* CONFIG_GPIO_STM32_PORTF */
#ifdef CONFIG_GPIO_STM32_PORTG
GPIO_DEVICE_INIT("GPIOG", g, GPIOG_BASE, STM32_PORTG,
STM32_PERIPH_GPIOG, STM32_CLOCK_BUS_GPIO);
#endif /* CONFIG_GPIO_STM32_PORTG */
#ifdef CONFIG_GPIO_STM32_PORTH
GPIO_DEVICE_INIT("GPIOH", h, GPIOH_BASE, STM32_PORTH,
STM32_PERIPH_GPIOH, STM32_CLOCK_BUS_GPIO);
#endif /* CONFIG_GPIO_STM32_PORTH */