Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 | /* * Copyright (c) 2014 Wind River Systems, Inc. * * SPDX-License-Identifier: Apache-2.0 */ /** * @file * @brief Reset handler * * Reset handler that prepares the system for running C code. */ // #include <board.h> #include <toolchain.h> #include <sections.h> #include <arch/cpu.h> GDATA(_interrupt_stack) GDATA(_firq_stack) GDATA(_main_stack) /* use one of the available interrupt stacks during init */ /* FIRQ only ? */ #if CONFIG_NUM_IRQ_PRIO_LEVELS == 1 /* FIRQ, but uses _interrupt_stack ? */ #if CONFIG_RGF_NUM_BANKS == 1 #define INIT_STACK _interrupt_stack #define INIT_STACK_SIZE CONFIG_ISR_STACK_SIZE #else #define INIT_STACK _firq_stack #define INIT_STACK_SIZE CONFIG_FIRQ_STACK_SIZE #endif #else #define INIT_STACK _interrupt_stack #define INIT_STACK_SIZE CONFIG_ISR_STACK_SIZE #endif GTEXT(__reset) GTEXT(__start) /** * * @brief Reset vector * * Ran when the system comes out of reset. The processor is at supervisor level. * * Locking interrupts prevents anything from interrupting the CPU. * * When these steps are completed, jump to _PrepC(), which will finish setting * up the system for running C code. * * @return N/A */ SECTION_FUNC(TEXT,__reset) SECTION_FUNC(TEXT,__start) /* lock interrupts: will get unlocked when switch to main task */ clri mov r1, 1 invalidate_and_disable_icache: lr r0, [_ARC_V2_I_CACHE_BUILD] and.f r0, r0, 0xff bz.nd invalidate_dcache mov_s r2, 0 sr r2, [_ARC_V2_IC_IVIC] /* writing to IC_IVIC needs 3 NOPs */ nop nop nop sr r1, [_ARC_V2_IC_CTRL] invalidate_dcache: lr r3, [_ARC_V2_D_CACHE_BUILD] and.f r3, r3, 0xff bz.nd done_cache_invalidate sr r1, [_ARC_V2_DC_IVDC] done_cache_invalidate: #if defined(CONFIG_SYS_POWER_DEEP_SLEEP) && \ !defined(CONFIG_BOOTLOADER_CONTEXT_RESTORE) jl @_sys_soc_resume_from_deep_sleep #endif #ifdef CONFIG_INIT_STACKS /* * use the main stack to call memset on the interrupt stack and the * FIRQ stack when CONFIG_INIT_STACKS is enabled before switching to * one of them for the rest of the early boot */ mov sp, _main_stack add sp, sp, CONFIG_MAIN_STACK_SIZE mov_s r0, _interrupt_stack mov_s r1, 0xaa mov_s r2, CONFIG_ISR_STACK_SIZE jl memset #if CONFIG_RGF_NUM_BANKS != 1 mov_s r0, _firq_stack mov_s r1, 0xaa mov_s r2, CONFIG_FIRQ_STACK_SIZE jl memset #endif #endif /* CONFIG_INIT_STACKS */ mov sp, INIT_STACK add sp, sp, INIT_STACK_SIZE j @_PrepC |