Boot Linux faster!

Check our new training course

Boot Linux faster!

Check our new training course
and Creative Commons CC-BY-SA
lecture and lab materials

Bootlin logo

Elixir Cross Referencer

  1
  2
  3
  4
  5
  6
  7
  8
  9
 10
 11
 12
 13
 14
 15
 16
 17
 18
 19
 20
 21
 22
 23
 24
 25
 26
 27
 28
 29
 30
 31
 32
 33
 34
 35
 36
 37
 38
 39
 40
 41
 42
 43
 44
 45
 46
 47
 48
 49
 50
 51
 52
 53
 54
 55
 56
 57
 58
 59
 60
 61
 62
 63
 64
 65
 66
 67
 68
 69
 70
 71
 72
 73
 74
 75
 76
 77
 78
 79
 80
 81
 82
 83
 84
 85
 86
 87
 88
 89
 90
 91
 92
 93
 94
 95
 96
 97
 98
 99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
/*
 * Copyright (c) 2015, Freescale Semiconductor, Inc.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without modification,
 * are permitted provided that the following conditions are met:
 *
 * o Redistributions of source code must retain the above copyright notice, this list
 *   of conditions and the following disclaimer.
 *
 * o Redistributions in binary form must reproduce the above copyright notice, this
 *   list of conditions and the following disclaimer in the documentation and/or
 *   other materials provided with the distribution.
 *
 * o Neither the name of Freescale Semiconductor, Inc. nor the names of its
 *   contributors may be used to endorse or promote products derived from this
 *   software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */
#ifndef _FSL_TSI_V4_H_
#define _FSL_TSI_V4_H_

#include "fsl_common.h"

/*!
 * @addtogroup tsi_v4_driver
 * @{
 */

/*! @file */

/*******************************************************************************
 * Definitions
 ******************************************************************************/

/*! @name Driver version */
/*@{*/
/*! @brief TSI driver version 2.0.0. */
#define FSL_TSI_DRIVER_VERSION (MAKE_VERSION(2, 0, 0))
/*@}*/

/*! @brief TSI status flags macro collection */
#define ALL_FLAGS_MASK  (TSI_GENCS_EOSF_MASK | TSI_GENCS_OUTRGF_MASK)
 
/*! @brief resistor bit shift in EXTCHRG bit-field */
#define TSI_V4_EXTCHRG_RESISTOR_BIT_SHIFT TSI_GENCS_EXTCHRG_SHIFT

/*! @brief filter bits shift in EXTCHRG bit-field  */
#define TSI_V4_EXTCHRG_FILTER_BITS_SHIFT (1U + TSI_GENCS_EXTCHRG_SHIFT)

/*! @brief macro of clearing the resistor bit in EXTCHRG bit-field */
#define TSI_V4_EXTCHRG_RESISTOR_BIT_CLEAR \
    ((uint32_t)((~(ALL_FLAGS_MASK | TSI_GENCS_EXTCHRG_MASK)) | (3U << TSI_V4_EXTCHRG_FILTER_BITS_SHIFT)))

/*! @brief macro of clearing the filter bits in EXTCHRG bit-field */
#define TSI_V4_EXTCHRG_FILTER_BITS_CLEAR \
    ((uint32_t)((~(ALL_FLAGS_MASK | TSI_GENCS_EXTCHRG_MASK)) | (1U << TSI_V4_EXTCHRG_RESISTOR_BIT_SHIFT)))

/*!
 * @brief TSI number of scan intervals for each electrode.
 *
 * These constants define the tsi number of consecutive scans in a TSI instance for each electrode.
 */
typedef enum _tsi_n_consecutive_scans
{
    kTSI_ConsecutiveScansNumber_1time = 0U,   /*!< Once per electrode */
    kTSI_ConsecutiveScansNumber_2time = 1U,   /*!< Twice per electrode */
    kTSI_ConsecutiveScansNumber_3time = 2U,   /*!< 3 times consecutive scan */
    kTSI_ConsecutiveScansNumber_4time = 3U,   /*!< 4 times consecutive scan */
    kTSI_ConsecutiveScansNumber_5time = 4U,   /*!< 5 times consecutive scan */
    kTSI_ConsecutiveScansNumber_6time = 5U,   /*!< 6 times consecutive scan */
    kTSI_ConsecutiveScansNumber_7time = 6U,   /*!< 7 times consecutive scan */
    kTSI_ConsecutiveScansNumber_8time = 7U,   /*!< 8 times consecutive scan */
    kTSI_ConsecutiveScansNumber_9time = 8U,   /*!< 9 times consecutive scan */
    kTSI_ConsecutiveScansNumber_10time = 9U,  /*!< 10 times consecutive scan */
    kTSI_ConsecutiveScansNumber_11time = 10U, /*!< 11 times consecutive scan */
    kTSI_ConsecutiveScansNumber_12time = 11U, /*!< 12 times consecutive scan */
    kTSI_ConsecutiveScansNumber_13time = 12U, /*!< 13 times consecutive scan */
    kTSI_ConsecutiveScansNumber_14time = 13U, /*!< 14 times consecutive scan */
    kTSI_ConsecutiveScansNumber_15time = 14U, /*!< 15 times consecutive scan */
    kTSI_ConsecutiveScansNumber_16time = 15U, /*!< 16 times consecutive scan */
    kTSI_ConsecutiveScansNumber_17time = 16U, /*!< 17 times consecutive scan */
    kTSI_ConsecutiveScansNumber_18time = 17U, /*!< 18 times consecutive scan */
    kTSI_ConsecutiveScansNumber_19time = 18U, /*!< 19 times consecutive scan */
    kTSI_ConsecutiveScansNumber_20time = 19U, /*!< 20 times consecutive scan */
    kTSI_ConsecutiveScansNumber_21time = 20U, /*!< 21 times consecutive scan */
    kTSI_ConsecutiveScansNumber_22time = 21U, /*!< 22 times consecutive scan */
    kTSI_ConsecutiveScansNumber_23time = 22U, /*!< 23 times consecutive scan */
    kTSI_ConsecutiveScansNumber_24time = 23U, /*!< 24 times consecutive scan */
    kTSI_ConsecutiveScansNumber_25time = 24U, /*!< 25 times consecutive scan */
    kTSI_ConsecutiveScansNumber_26time = 25U, /*!< 26 times consecutive scan */
    kTSI_ConsecutiveScansNumber_27time = 26U, /*!< 27 times consecutive scan */
    kTSI_ConsecutiveScansNumber_28time = 27U, /*!< 28 times consecutive scan */
    kTSI_ConsecutiveScansNumber_29time = 28U, /*!< 29 times consecutive scan */
    kTSI_ConsecutiveScansNumber_30time = 29U, /*!< 30 times consecutive scan */
    kTSI_ConsecutiveScansNumber_31time = 30U, /*!< 31 times consecutive scan */
    kTSI_ConsecutiveScansNumber_32time = 31U  /*!< 32 times consecutive scan */
} tsi_n_consecutive_scans_t;

/*!
 * @brief TSI electrode oscillator prescaler.
 *
 * These constants define the TSI electrode oscillator prescaler in a TSI instance.
 */
typedef enum _tsi_electrode_osc_prescaler
{
    kTSI_ElecOscPrescaler_1div = 0U,  /*!< Electrode oscillator frequency divided by 1 */
    kTSI_ElecOscPrescaler_2div = 1U,  /*!< Electrode oscillator frequency divided by 2 */
    kTSI_ElecOscPrescaler_4div = 2U,  /*!< Electrode oscillator frequency divided by 4 */
    kTSI_ElecOscPrescaler_8div = 3U,  /*!< Electrode oscillator frequency divided by 8 */
    kTSI_ElecOscPrescaler_16div = 4U, /*!< Electrode oscillator frequency divided by 16 */
    kTSI_ElecOscPrescaler_32div = 5U, /*!< Electrode oscillator frequency divided by 32 */
    kTSI_ElecOscPrescaler_64div = 6U, /*!< Electrode oscillator frequency divided by 64 */
    kTSI_ElecOscPrescaler_128div = 7U /*!< Electrode oscillator frequency divided by 128 */
} tsi_electrode_osc_prescaler_t;

/*!
 * @brief TSI analog mode select.
 *
 * Set up TSI analog modes in a TSI instance.
 */
typedef enum _tsi_analog_mode
{
    kTSI_AnalogModeSel_Capacitive = 0U,     /*!< Active TSI capacitive sensing mode */
    kTSI_AnalogModeSel_NoiseNoFreqLim = 4U, /*!< Single threshold noise detection mode with no freq. limitation. */
    kTSI_AnalogModeSel_NoiseFreqLim = 8U,   /*!< Single threshold noise detection mode with freq. limitation. */
    kTSI_AnalogModeSel_AutoNoise = 12U      /*!< Active TSI analog in automatic noise detection mode */
} tsi_analog_mode_t;

/*!
 * @brief TSI Reference oscillator charge and discharge current select.
 *
 * These constants define the TSI Reference oscillator charge current select in a TSI (REFCHRG) instance.
 */
typedef enum _tsi_reference_osc_charge_current
{
    kTSI_RefOscChargeCurrent_500nA = 0U, /*!< Reference oscillator charge current is 500 µA */
    kTSI_RefOscChargeCurrent_1uA = 1U,   /*!< Reference oscillator charge current is 1 µA */
    kTSI_RefOscChargeCurrent_2uA = 2U,   /*!< Reference oscillator charge current is 2 µA */
    kTSI_RefOscChargeCurrent_4uA = 3U,   /*!< Reference oscillator charge current is 4 µA */
    kTSI_RefOscChargeCurrent_8uA = 4U,   /*!< Reference oscillator charge current is 8 µA */
    kTSI_RefOscChargeCurrent_16uA = 5U,  /*!< Reference oscillator charge current is 16 µA */
    kTSI_RefOscChargeCurrent_32uA = 6U,  /*!< Reference oscillator charge current is 32 µA */
    kTSI_RefOscChargeCurrent_64uA = 7U   /*!< Reference oscillator charge current is 64 µA */
} tsi_reference_osc_charge_current_t;

/*!
 * @brief TSI oscilator's voltage rails.
 *
 * These bits indicate the oscillator's voltage rails.
 */
typedef enum _tsi_osc_voltage_rails
{
    kTSI_OscVolRailsOption_0 = 0U, /*!< DVOLT value option 0, the value may differ on different platforms */
    kTSI_OscVolRailsOption_1 = 1U, /*!< DVOLT value option 1, the value may differ on different platforms */
    kTSI_OscVolRailsOption_2 = 2U, /*!< DVOLT value option 2, the value may differ on different platforms */
    kTSI_OscVolRailsOption_3 = 3U  /*!< DVOLT value option 3, the value may differ on different platforms */
} tsi_osc_voltage_rails_t;

/*!
 * @brief TSI External oscillator charge and discharge current select.
 *
 * These bits indicate the electrode oscillator charge and discharge current value
 * in TSI (EXTCHRG) instance.
 */
typedef enum _tsi_external_osc_charge_current
{
    kTSI_ExtOscChargeCurrent_500nA = 0U, /*!< External oscillator charge current is 500 µA */
    kTSI_ExtOscChargeCurrent_1uA = 1U,   /*!< External oscillator charge current is 1 µA */
    kTSI_ExtOscChargeCurrent_2uA = 2U,   /*!< External oscillator charge current is 2 µA */
    kTSI_ExtOscChargeCurrent_4uA = 3U,   /*!< External oscillator charge current is 4 µA */
    kTSI_ExtOscChargeCurrent_8uA = 4U,   /*!< External oscillator charge current is 8 µA */
    kTSI_ExtOscChargeCurrent_16uA = 5U,  /*!< External oscillator charge current is 16 µA */
    kTSI_ExtOscChargeCurrent_32uA = 6U,  /*!< External oscillator charge current is 32 µA */
    kTSI_ExtOscChargeCurrent_64uA = 7U   /*!< External oscillator charge current is 64 µA */
} tsi_external_osc_charge_current_t;

/*!
 * @brief TSI series resistance RS value select.
 *
 * These bits indicate the electrode RS series resistance for the noise mode
 * in TSI (EXTCHRG) instance.
 */
typedef enum _tsi_series_resistance
{
    kTSI_SeriesResistance_32k = 0U, /*!< Series Resistance is 32 kilo ohms   */
    kTSI_SeriesResistance_187k = 1U /*!< Series Resistance is 18 7 kilo ohms  */
} tsi_series_resistor_t;

/*!
 * @brief TSI series filter bits select.
 *
 * These bits indicate the count of the filter bits
 * in TSI noise mode EXTCHRG[2:1] bits
 */
typedef enum _tsi_filter_bits
{
    kTSI_FilterBits_3 = 0U, /*!< 3 filter bits, 8 peaks increments the cnt+1 */
    kTSI_FilterBits_2 = 1U, /*!< 2 filter bits, 4 peaks increments the cnt+1 */
    kTSI_FilterBits_1 = 2U, /*!< 1 filter bits, 2 peaks increments the cnt+1 */
    kTSI_FilterBits_0 = 3U  /*!< no filter bits,1 peak  increments the cnt+1 */
} tsi_filter_bits_t;

/*! @brief TSI status flags. */
typedef enum _tsi_status_flags
{
    kTSI_EndOfScanFlag = TSI_GENCS_EOSF_MASK,   /*!< End-Of-Scan flag */
    kTSI_OutOfRangeFlag = TSI_GENCS_OUTRGF_MASK /*!< Out-Of-Range flag */
} tsi_status_flags_t;

/*! @brief TSI feature interrupt source.*/
typedef enum _tsi_interrupt_enable
{
    kTSI_GlobalInterruptEnable = 1U,     /*!< TSI module global interrupt */
    kTSI_OutOfRangeInterruptEnable = 2U, /*!< Out-Of-Range interrupt */
    kTSI_EndOfScanInterruptEnable = 4U   /*!< End-Of-Scan interrupt */
} tsi_interrupt_enable_t;

/*! @brief TSI calibration data storage. */
typedef struct _tsi_calibration_data
{
    uint16_t calibratedData[FSL_FEATURE_TSI_CHANNEL_COUNT]; /*!< TSI calibration data storage buffer */
} tsi_calibration_data_t;

/*!
 * @brief TSI configuration structure.
 *
 * This structure contains the settings for the most common TSI configurations including
 * the TSI module charge currents, number of scans, thresholds, and so on.
 */
typedef struct _tsi_config
{
    uint16_t thresh;                            /*!< High threshold. */
    uint16_t thresl;                            /*!< Low threshold. */
    tsi_electrode_osc_prescaler_t prescaler;    /*!< Prescaler */
    tsi_external_osc_charge_current_t extchrg;  /*!< Electrode charge current */
    tsi_reference_osc_charge_current_t refchrg; /*!< Reference charge current */
    tsi_n_consecutive_scans_t nscn;             /*!< Number of scans. */
    tsi_analog_mode_t mode;                     /*!< TSI mode of operation. */
    tsi_osc_voltage_rails_t dvolt;              /*!< Oscillator's voltage rails. */
    tsi_series_resistor_t resistor;             /*!< Series resistance value  */
    tsi_filter_bits_t filter;                   /*!< Noise mode filter bits   */
} tsi_config_t;

/*******************************************************************************
 * API
 ******************************************************************************/

#ifdef __cplusplus
extern "C" {
#endif

/*!
 * @brief Initializes hardware.
 *
 * @details Initializes the peripheral to the targeted state specified by parameter configuration,
 *          such as sets prescalers, number of scans, clocks, delta voltage
 *          series resistor, filter bits, reference, and electrode charge current and threshold.
 * @param  base    TSI peripheral base address.
 * @param  config  Pointer to TSI module configuration structure.
 * @return none
 */
void TSI_Init(TSI_Type *base, const tsi_config_t *config);

/*!
 * @brief De-initializes hardware.
 *
 * @details De-initializes the peripheral to default state.
 *
 * @param  base  TSI peripheral base address.
 * @return none
 */
void TSI_Deinit(TSI_Type *base);

/*!
 * @brief Gets the TSI normal mode user configuration structure.
 * This interface sets userConfig structure to a default value. The configuration structure only
 * includes the settings for the whole TSI.
 * The user configure is set to these values:
 * @code
    userConfig->prescaler = kTSI_ElecOscPrescaler_2div;
    userConfig->extchrg = kTSI_ExtOscChargeCurrent_4uA;
    userConfig->refchrg = kTSI_RefOscChargeCurrent_4uA;
    userConfig->nscn = kTSI_ConsecutiveScansNumber_10time;
    userConfig->mode = kTSI_AnalogModeSel_Capacitive;
    userConfig->dvolt = kTSI_OscVolRailsOption_0;
    userConfig->resistor = kTSI_SeriesResistance_32k;
    userConfig->filter = kTSI_FilterBits_1;
    userConfig->thresh = 0U;
    userConfig->thresl = 0U;
   @endcode
 *
 * @param userConfig Pointer to the TSI user configuration structure.
 */
void TSI_GetNormalModeDefaultConfig(tsi_config_t *userConfig);

/*!
 * @brief Gets the TSI low power mode default user configuration structure.
 * This interface sets userConfig structure to a default value. The configuration structure only
 * includes the settings for the whole TSI.
 * The user configure is set to these values:
 * @code
    userConfig->prescaler = kTSI_ElecOscPrescaler_2div;
    userConfig->extchrg = kTSI_ExtOscChargeCurrent_4uA;
    userConfig->refchrg = kTSI_RefOscChargeCurrent_4uA;
    userConfig->nscn = kTSI_ConsecutiveScansNumber_10time;
    userConfig->mode = kTSI_AnalogModeSel_Capacitive;
    userConfig->dvolt = kTSI_OscVolRailsOption_0;
    userConfig->resistor = kTSI_SeriesResistance_32k;
    userConfig->filter = kTSI_FilterBits_1;
    userConfig->thresh = 400U;
    userConfig->thresl = 0U;
   @endcode
 *
 * @param userConfig Pointer to the TSI user configuration structure.
 */
void TSI_GetLowPowerModeDefaultConfig(tsi_config_t *userConfig);

/*!
 * @brief Hardware calibration.
 *
 * @details Calibrates the peripheral to fetch the initial counter value of
 *          the enabled electrodes.
 *          This API is mostly used at initial application setup. Call
 *          this function after the \ref TSI_Init API and use the calibrated
 *          counter values to set up applications (such as to determine
 *          under which counter value we can confirm a touch event occurs).
 *
 * @param   base    TSI peripheral base address.
 * @param   calBuff Data buffer that store the calibrated counter value.
 * @return none
 *
 */
void TSI_Calibrate(TSI_Type *base, tsi_calibration_data_t *calBuff);

/*!
 * @brief Enables the TSI interrupt requests.
 * @param base TSI peripheral base address.
 * @param mask interrupt source
 *     The parameter can be combination of the following source if defined:
 *     @arg kTSI_GlobalInterruptEnable
 *     @arg kTSI_EndOfScanInterruptEnable
 *     @arg kTSI_OutOfRangeInterruptEnable
 */
void TSI_EnableInterrupts(TSI_Type *base, uint32_t mask);

/*!
 * @brief Disables the TSI interrupt requests.
 * @param base TSI peripheral base address.
 * @param mask interrupt source
 *     The parameter can be combination of the following source if defined:
 *     @arg kTSI_GlobalInterruptEnable
 *     @arg kTSI_EndOfScanInterruptEnable
 *     @arg kTSI_OutOfRangeInterruptEnable
 */
void TSI_DisableInterrupts(TSI_Type *base, uint32_t mask);

/*!
* @brief Gets an interrupt flag.
* This function gets the TSI interrupt flags.
*
* @param    base  TSI peripheral base address.
* @return         The mask of these status flags combination.
*/
static inline uint32_t TSI_GetStatusFlags(TSI_Type *base)
{
    return (base->GENCS & (kTSI_EndOfScanFlag | kTSI_OutOfRangeFlag));
}

/*!
 * @brief Clears the interrupt flag.
 *
 * This function clears the TSI interrupt flag,
 * automatically cleared flags can't be cleared by this function.
 *
 * @param base TSI peripheral base address.
 * @param mask The status flags to clear.
 */
void TSI_ClearStatusFlags(TSI_Type *base, uint32_t mask);

/*!
* @brief Gets the TSI scan trigger mode.
*
* @param  base  TSI peripheral base address.
* @return       Scan trigger mode.
*/
static inline uint32_t TSI_GetScanTriggerMode(TSI_Type *base)
{
    return (base->GENCS & TSI_GENCS_STM_MASK);
}

/*!
* @brief Gets the scan in progress flag.
*
* @param    base TSI peripheral base address.
* @return   True  - scan is in progress.
*           False - scan is not in progress.
*/
static inline bool TSI_IsScanInProgress(TSI_Type *base)
{
    return (base->GENCS & TSI_GENCS_SCNIP_MASK);
}

/*!
* @brief Sets the prescaler.
*
* @param    base      TSI peripheral base address.
* @param    prescaler Prescaler value.
* @return   none.
*/
static inline void TSI_SetElectrodeOSCPrescaler(TSI_Type *base, tsi_electrode_osc_prescaler_t prescaler)
{
    base->GENCS = (base->GENCS & ~(TSI_GENCS_PS_MASK | ALL_FLAGS_MASK)) | (TSI_GENCS_PS(prescaler));
}

/*!
* @brief Sets the number of scans (NSCN).
*
* @param    base    TSI peripheral base address.
* @param    number  Number of scans.
* @return   none.
*/
static inline void TSI_SetNumberOfScans(TSI_Type *base, tsi_n_consecutive_scans_t number)
{
    base->GENCS = (base->GENCS & ~(TSI_GENCS_NSCN_MASK | ALL_FLAGS_MASK)) | (TSI_GENCS_NSCN(number));
}

/*!
* @brief Enables/disables the TSI module.
*
* @param   base   TSI peripheral base address.
* @param   enable Choose whether to enable or disable module;
*                 - true   Enable TSI module;
*                 - false  Disable TSI module;
* @return  none.
*/
static inline void TSI_EnableModule(TSI_Type *base, bool enable)
{
    if (enable)
    {
        base->GENCS = (base->GENCS & ~ALL_FLAGS_MASK) | TSI_GENCS_TSIEN_MASK;    /* Enable module */
    }
    else
    {
        base->GENCS = (base->GENCS & ~ALL_FLAGS_MASK) & (~TSI_GENCS_TSIEN_MASK); /* Disable module */
    }
}

/*!
* @brief Sets the TSI low power STOP mode as enabled or disabled.
*        This enables the TSI module function in low power modes.
*
* @param    base    TSI peripheral base address.
* @param    enable  Choose to enable or disable STOP mode.
*                   - true   Enable module in STOP mode;
*                   - false  Disable module in STOP mode;
* @return   none.
*/
static inline void TSI_EnableLowPower(TSI_Type *base, bool enable)
{
    if (enable)
    {
        base->GENCS = (base->GENCS & ~ALL_FLAGS_MASK) | TSI_GENCS_STPE_MASK;    /* Module enabled in low power stop modes */
    }
    else
    {
        base->GENCS = (base->GENCS & ~ALL_FLAGS_MASK) & (~TSI_GENCS_STPE_MASK); /* Module disabled in low power stop modes */
    }
}

/*!
* @brief Enables/disables the hardware trigger scan.
*
* @param    base TSI peripheral base address.
* @param    enable Choose to enable hardware trigger or software trigger scan.
*                  - true    Enable hardware trigger scan;
*                  - false   Enable software trigger scan;
* @return   none.
*/
static inline void TSI_EnableHardwareTriggerScan(TSI_Type *base, bool enable)
{
    if (enable)
    {
        base->GENCS = (base->GENCS & ~ALL_FLAGS_MASK) | TSI_GENCS_STM_MASK;    /* Enable hardware trigger scan */
    }
    else
    {
        base->GENCS = (base->GENCS & ~ALL_FLAGS_MASK) & (~TSI_GENCS_STM_MASK); /* Enable software trigger scan */
    }
}

/*!
* @brief Starts a software trigger measurement (triggers a new measurement).
*
* @param    base TSI peripheral base address.
* @return   none.
*/
static inline void TSI_StartSoftwareTrigger(TSI_Type *base)
{
    base->DATA |= TSI_DATA_SWTS_MASK;
}

/*!
* @brief Sets the the measured channel number.
*
* @param    base    TSI peripheral base address.
* @param    channel Channel number 0 ... 15.
* @return   none.
*/
static inline void TSI_SetMeasuredChannelNumber(TSI_Type *base, uint8_t channel)
{
    assert(channel < FSL_FEATURE_TSI_CHANNEL_COUNT);

    base->DATA = ((base->DATA) & ~TSI_DATA_TSICH_MASK) | (TSI_DATA_TSICH(channel));
}

/*!
* @brief Gets the current measured channel number.
*
* @param    base    TSI peripheral base address.
* @return   uint8_t    Channel number 0 ... 15.
*/
static inline uint8_t TSI_GetMeasuredChannelNumber(TSI_Type *base)
{
    return (uint8_t)((base->DATA & TSI_DATA_TSICH_MASK) >> TSI_DATA_TSICH_SHIFT);
}

/*!
* @brief Enables/disables the DMA transfer.
*
* @param   base   TSI peripheral base address.
* @param   enable Choose to enable DMA transfer or not.
*                 - true    Enable DMA transfer;
*                 - false   Disable DMA transfer;
* @return  none.
*/
static inline void TSI_EnableDmaTransfer(TSI_Type *base, bool enable)
{
    if (enable)
    {
        base->DATA |= TSI_DATA_DMAEN_MASK; /* Enable DMA transfer */
    }
    else
    {
        base->DATA &= ~TSI_DATA_DMAEN_MASK; /* Disable DMA transfer */
    }
}

#if defined(FSL_FEATURE_TSI_HAS_END_OF_SCAN_DMA_ENABLE) && (FSL_FEATURE_TSI_HAS_END_OF_SCAN_DMA_ENABLE == 1)
/*!
* @brief Decides whether to enable end of scan DMA transfer request only.
*
* @param    base TSI peripheral base address.
* @param    enable  Choose whether to enable End of Scan DMA transfer request only.
*                   - true  Enable End of Scan DMA transfer request only;
*                   - false Both End-of-Scan and Out-of-Range can generate DMA transfer request.
* @return   none.
*/
static inline void TSI_EnableEndOfScanDmaTransferOnly(TSI_Type *base, bool enable)
{
    if (enable)
    {
        base->GENCS = (base->GENCS & ~ALL_FLAGS_MASK) | TSI_GENCS_EOSDMEO_MASK; /* Enable End of Scan DMA transfer request only; */
    }
    else
    {
        base->GENCS =
            (base->GENCS & ~ALL_FLAGS_MASK) & (~TSI_GENCS_EOSDMEO_MASK); /* Both End-of-Scan and Out-of-Range can generate DMA transfer request. */
    }
}
#endif /* End of (FSL_FEATURE_TSI_HAS_END_OF_SCAN_DMA_ENABLE == 1)*/

/*!
* @brief Gets the conversion counter value.
*
* @param    base TSI peripheral base address.
* @return   Accumulated scan counter value ticked by the reference clock.
*/
static inline uint16_t TSI_GetCounter(TSI_Type *base)
{
    return (uint16_t)(base->DATA & TSI_DATA_TSICNT_MASK);
}

/*!
* @brief Sets the TSI wake-up channel low threshold.
*
* @param    base           TSI peripheral base address.
* @param    low_threshold  Low counter threshold.
* @return   none.
*/
static inline void TSI_SetLowThreshold(TSI_Type *base, uint16_t low_threshold)
{
    assert(low_threshold < 0xFFFFU);

    base->TSHD = ((base->TSHD) & ~TSI_TSHD_THRESL_MASK) | (TSI_TSHD_THRESL(low_threshold));
}

/*!
* @brief Sets the TSI wake-up channel high threshold.
*
* @param    base            TSI peripheral base address.
* @param    high_threshold  High counter threshold.
* @return   none.
*/
static inline void TSI_SetHighThreshold(TSI_Type *base, uint16_t high_threshold)
{
    assert(high_threshold < 0xFFFFU);

    base->TSHD = ((base->TSHD) & ~TSI_TSHD_THRESH_MASK) | (TSI_TSHD_THRESH(high_threshold));
}

/*!
* @brief Sets the analog mode of the TSI module.
*
* @param    base   TSI peripheral base address.
* @param    mode   Mode value.
* @return   none.
*/
static inline void TSI_SetAnalogMode(TSI_Type *base, tsi_analog_mode_t mode)
{
    base->GENCS = (base->GENCS & ~(TSI_GENCS_MODE_MASK | ALL_FLAGS_MASK)) | (TSI_GENCS_MODE(mode));
}

/*!
* @brief Gets the noise mode result of the TSI module.
*
* @param   base  TSI peripheral base address.
* @return        Value of the GENCS[MODE] bit-fields.
*/
static inline uint8_t TSI_GetNoiseModeResult(TSI_Type *base)
{
    return (base->GENCS & TSI_GENCS_MODE_MASK) >> TSI_GENCS_MODE_SHIFT;
}

/*!
* @brief Sets the reference oscillator charge current.
*
* @param   base    TSI peripheral base address.
* @param   current The reference oscillator charge current.
* @return  none.
*/
static inline void TSI_SetReferenceChargeCurrent(TSI_Type *base, tsi_reference_osc_charge_current_t current)
{
    base->GENCS = (base->GENCS & ~(TSI_GENCS_REFCHRG_MASK | ALL_FLAGS_MASK)) | (TSI_GENCS_REFCHRG(current));
}

/*!
* @brief Sets the external electrode charge current.
*
* @param    base    TSI peripheral base address.
* @param    current External electrode charge current.
* @return   none.
*/
static inline void TSI_SetElectrodeChargeCurrent(TSI_Type *base, tsi_external_osc_charge_current_t current)
{
    base->GENCS = (base->GENCS & ~(TSI_GENCS_EXTCHRG_MASK | ALL_FLAGS_MASK)) | (TSI_GENCS_EXTCHRG(current));
}

/*!
* @brief Sets the oscillator's voltage rails.
*
* @param    base    TSI peripheral base address.
* @param    dvolt   The voltage rails.
* @return   none.
*/
static inline void TSI_SetOscVoltageRails(TSI_Type *base, tsi_osc_voltage_rails_t dvolt)
{
    base->GENCS = (base->GENCS & ~(TSI_GENCS_DVOLT_MASK | ALL_FLAGS_MASK)) | (TSI_GENCS_DVOLT(dvolt));
}

/*!
* @brief Sets the electrode series resistance value in EXTCHRG[0] bit.
*
* @param    base     TSI peripheral base address.
* @param    resistor Series resistance.
* @return   none.
*/
static inline void TSI_SetElectrodeSeriesResistor(TSI_Type *base, tsi_series_resistor_t resistor)
{
    base->GENCS = (base->GENCS & TSI_V4_EXTCHRG_RESISTOR_BIT_CLEAR) | TSI_GENCS_EXTCHRG(resistor);
}

/*!
* @brief Sets the electrode filter bits value in EXTCHRG[2:1] bits.
*
* @param    base    TSI peripheral base address.
* @param    filter  Series resistance.
* @return   none.
*/
static inline void TSI_SetFilterBits(TSI_Type *base, tsi_filter_bits_t filter)
{
    base->GENCS = (base->GENCS & TSI_V4_EXTCHRG_FILTER_BITS_CLEAR) | (filter << TSI_V4_EXTCHRG_FILTER_BITS_SHIFT);
}

#ifdef __cplusplus
}
#endif /* __cplusplus */

/*! @}*/

#endif /* _FSL_TSI_V4_H_ */