/*
* Copyright (c) 2016 Intel Corporation
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <device.h>
#include <i2c.h>
#include <misc/__assert.h>
#include <misc/util.h>
#include <kernel.h>
#include <sensor.h>
#include "lis3mdl.h"
int lis3mdl_trigger_set(struct device *dev,
const struct sensor_trigger *trig,
sensor_trigger_handler_t handler)
{
struct lis3mdl_data *drv_data = dev->driver_data;
__ASSERT_NO_MSG(trig->type == SENSOR_TRIG_DATA_READY);
gpio_pin_disable_callback(drv_data->gpio, CONFIG_LIS3MDL_GPIO_PIN_NUM);
drv_data->data_ready_handler = handler;
if (handler == NULL) {
return 0;
}
drv_data->data_ready_trigger = *trig;
gpio_pin_enable_callback(drv_data->gpio, CONFIG_LIS3MDL_GPIO_PIN_NUM);
return 0;
}
static void lis3mdl_gpio_callback(struct device *dev,
struct gpio_callback *cb, uint32_t pins)
{
struct lis3mdl_data *drv_data =
CONTAINER_OF(cb, struct lis3mdl_data, gpio_cb);
ARG_UNUSED(pins);
gpio_pin_disable_callback(dev, CONFIG_LIS3MDL_GPIO_PIN_NUM);
#if defined(CONFIG_LIS3MDL_TRIGGER_OWN_THREAD)
k_sem_give(&drv_data->gpio_sem);
#elif defined(CONFIG_LIS3MDL_TRIGGER_GLOBAL_THREAD)
k_work_submit(&drv_data->work);
#endif
}
static void lis3mdl_thread_cb(void *arg)
{
struct device *dev = arg;
struct lis3mdl_data *drv_data = dev->driver_data;
if (drv_data->data_ready_handler != NULL) {
drv_data->data_ready_handler(dev,
&drv_data->data_ready_trigger);
}
gpio_pin_enable_callback(drv_data->gpio, CONFIG_LIS3MDL_GPIO_PIN_NUM);
}
#ifdef CONFIG_LIS3MDL_TRIGGER_OWN_THREAD
static void lis3mdl_thread(int dev_ptr, int unused)
{
struct device *dev = INT_TO_POINTER(dev_ptr);
struct lis3mdl_data *drv_data = dev->driver_data;
ARG_UNUSED(unused);
while (1) {
k_sem_take(&drv_data->gpio_sem, K_FOREVER);
lis3mdl_thread_cb(dev);
}
}
#endif
#ifdef CONFIG_LIS3MDL_TRIGGER_GLOBAL_THREAD
static void lis3mdl_work_cb(struct k_work *work)
{
struct lis3mdl_data *drv_data =
CONTAINER_OF(work, struct lis3mdl_data, work);
lis3mdl_thread_cb(drv_data->dev);
}
#endif
int lis3mdl_init_interrupt(struct device *dev)
{
struct lis3mdl_data *drv_data = dev->driver_data;
/* setup data ready gpio interrupt */
drv_data->gpio = device_get_binding(CONFIG_LIS3MDL_GPIO_DEV_NAME);
if (drv_data->gpio == NULL) {
SYS_LOG_DBG("Cannot get pointer to %s device.",
CONFIG_LIS3MDL_GPIO_DEV_NAME);
return -EINVAL;
}
gpio_pin_configure(drv_data->gpio, CONFIG_LIS3MDL_GPIO_PIN_NUM,
GPIO_DIR_IN | GPIO_INT | GPIO_INT_EDGE |
GPIO_INT_ACTIVE_HIGH | GPIO_INT_DEBOUNCE);
gpio_init_callback(&drv_data->gpio_cb,
lis3mdl_gpio_callback,
BIT(CONFIG_LIS3MDL_GPIO_PIN_NUM));
if (gpio_add_callback(drv_data->gpio, &drv_data->gpio_cb) < 0) {
SYS_LOG_DBG("Could not set gpio callback.");
return -EIO;
}
/* clear data ready interrupt line by reading sample data */
if (lis3mdl_sample_fetch(dev, SENSOR_CHAN_ALL) < 0) {
SYS_LOG_DBG("Could not clear data ready interrupt line.");
return -EIO;
}
/* enable interrupt */
if (i2c_reg_write_byte(drv_data->i2c, CONFIG_LIS3MDL_I2C_ADDR,
LIS3MDL_REG_INT_CFG, LIS3MDL_INT_XYZ_EN) < 0) {
SYS_LOG_DBG("Could not enable interrupt.");
return -EIO;
}
#if defined(CONFIG_LIS3MDL_TRIGGER_OWN_THREAD)
k_sem_init(&drv_data->gpio_sem, 0, UINT_MAX);
k_thread_spawn(drv_data->thread_stack, CONFIG_LIS3MDL_THREAD_STACK_SIZE,
(k_thread_entry_t)lis3mdl_thread, POINTER_TO_INT(dev),
0, NULL, K_PRIO_COOP(CONFIG_LIS3MDL_THREAD_PRIORITY), 0, 0);
#elif defined(CONFIG_LIS3MDL_TRIGGER_GLOBAL_THREAD)
drv_data->work.handler = lis3mdl_work_cb;
drv_data->dev = dev;
#endif
gpio_pin_enable_callback(drv_data->gpio, CONFIG_LIS3MDL_GPIO_PIN_NUM);
return 0;
}