Linux Audio

Check our new training course

Embedded Linux Audio

Check our new training course
with Creative Commons CC-BY-SA
lecture materials

Bootlin logo

Elixir Cross Referencer

Open Menu /drivers/pinmux/stm32/pinmux_board_nucleo_l476rg.c
Loading...
 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
/*
 * Copyright (c) 2016 Open-RnD Sp. z o.o.
 * Copyright (c) 2016 BayLibre, SAS
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#include <kernel.h>
#include <device.h>
#include <init.h>
#include <pinmux.h>
#include <sys_io.h>
#include "pinmux/pinmux.h"

#include "pinmux_stm32.h"

/* pin assignments for NUCLEO-L476RG board */
static const struct pin_config pinconf[] = {
#ifdef CONFIG_UART_STM32_PORT_1
	{STM32_PIN_PA9,  STM32L4X_PINMUX_FUNC_PA9_USART1_TX},
	{STM32_PIN_PA10, STM32L4X_PINMUX_FUNC_PA10_USART1_RX},
#endif	/* CONFIG_UART_STM32_PORT_1 */
#ifdef CONFIG_UART_STM32_PORT_2
	{STM32_PIN_PA2, STM32L4X_PINMUX_FUNC_PA2_USART2_TX},
	{STM32_PIN_PA3, STM32L4X_PINMUX_FUNC_PA3_USART2_RX},
#endif	/* CONFIG_UART_STM32_PORT_2 */
#ifdef CONFIG_UART_STM32_PORT_3
	{STM32_PIN_PB10, STM32L4X_PINMUX_FUNC_PB10_USART3_TX},
	{STM32_PIN_PB11, STM32L4X_PINMUX_FUNC_PB11_USART3_RX},
#endif	/* CONFIG_UART_STM32_PORT_3 */
#ifdef CONFIG_I2C_0
	{STM32_PIN_PB6, STM32L4X_PINMUX_FUNC_PB6_I2C1_SCL},
	{STM32_PIN_PB7, STM32L4X_PINMUX_FUNC_PB7_I2C1_SDA},
#endif /* CONFIG_I2C_0 */
#ifdef CONFIG_PWM_STM32_2
	{STM32_PIN_PA0, STM32L4X_PINMUX_FUNC_PA0_PWM2_CH1},
#endif /* CONFIG_PWM_STM32_2 */
#ifdef CONFIG_SPI_1
	{STM32_PIN_PA4, STM32L4X_PINMUX_FUNC_PA4_SPI1_NSS},
	{STM32_PIN_PB3, STM32L4X_PINMUX_FUNC_PB3_SPI1_SCK},
	{STM32_PIN_PA5, STM32L4X_PINMUX_FUNC_PA5_SPI1_SCK},
	{STM32_PIN_PA6, STM32L4X_PINMUX_FUNC_PA6_SPI1_MISO},
	{STM32_PIN_PA7, STM32L4X_PINMUX_FUNC_PA7_SPI1_MOSI},
#endif /* CONFIG_SPI_1 */
#ifdef CONFIG_SPI_3
	{STM32_PIN_PB3, STM32L4X_PINMUX_FUNC_PB3_SPI3_SCK},
	{STM32_PIN_PB4, STM32L4X_PINMUX_FUNC_PB4_SPI3_MISO},
	{STM32_PIN_PB5, STM32L4X_PINMUX_FUNC_PB5_SPI3_MOSI},
#endif /* CONFIG_SPI_3 */
};

static int pinmux_stm32_init(struct device *port)
{
	ARG_UNUSED(port);

	stm32_setup_pins(pinconf, ARRAY_SIZE(pinconf));

	return 0;
}

SYS_INIT(pinmux_stm32_init, PRE_KERNEL_1,
	 CONFIG_PINMUX_STM32_DEVICE_INITIALIZATION_PRIORITY);