/*
 * Copyright (c) 2015 Wind River Systems, Inc.
 *
 * SPDX-License-Identifier: Apache-2.0
 */

/**
 * @file
 * @brief Public APIs for UART drivers
 */

#ifndef __INCuarth
#define __INCuarth

/**
 * @brief UART Interface
 * @defgroup uart_interface UART Interface
 * @ingroup io_interfaces
 * @{
 */

#ifdef __cplusplus
extern "C" {
#endif

#include <errno.h>
#include <stddef.h>

#include <device.h>

#ifdef CONFIG_PCI
#include <drivers/pci/pci.h>
#include <drivers/pci/pci_mgr.h>
#endif
/**
 * @brief Options for @a UART initialization.
 */
#define UART_OPTION_AFCE 0x01

/** Common line controls for UART.*/
#define LINE_CTRL_BAUD_RATE	(1 << 0)
#define LINE_CTRL_RTS		(1 << 1)
#define LINE_CTRL_DTR		(1 << 2)
#define LINE_CTRL_DCD		(1 << 3)
#define LINE_CTRL_DSR		(1 << 4)

/* Common communication errors for UART.*/

/** @brief Overrun error */
#define UART_ERROR_OVERRUN  (1 << 0)

/** @brief Parity error */
#define UART_ERROR_PARITY   (1 << 1)

/** @brief Framing error */
#define UART_ERROR_FRAMING  (1 << 2)

/**
 * @brief Break interrupt error:
 *
 * A break interrupt was received. This happens when the serial input is
 * held at a logic '0' state for longer than the sum of start time + data bits
 * + parity + stop bits.
 */
#define UART_ERROR_BREAK    (1 << 3)

/**
 * @typedef uart_irq_callback_t
 * @brief Define the application callback function signature for UART.
 *
 * @param port Device struct for the UART device.
 */
typedef void (*uart_irq_callback_t)(struct device *port);

/**
 * @typedef uart_irq_config_func_t
 * @brief For configuring IRQ on each individual UART device.
 *
 * @internal
 */
typedef void (*uart_irq_config_func_t)(struct device *port);

/**
 * @brief UART device configuration.
 *
 * @param port Base port number
 * @param base Memory mapped base address
 * @param regs Register address
 * @param sys_clk_freq System clock frequency in Hz
 */
struct uart_device_config {
	union {
		uint32_t port;
		uint8_t *base;
		uint32_t regs;
	};

	uint32_t sys_clk_freq;

#ifdef CONFIG_PCI
	struct pci_dev_info  pci_dev;
#endif /* CONFIG_PCI */

#ifdef CONFIG_UART_INTERRUPT_DRIVEN
	uart_irq_config_func_t	irq_config_func;
#endif
};

/** @brief Driver API structure. */
struct uart_driver_api {
	/** Console I/O function */
	int (*poll_in)(struct device *dev, unsigned char *p_char);
	unsigned char (*poll_out)(struct device *dev, unsigned char out_char);

	/** Console I/O function */
	int (*err_check)(struct device *dev);

#ifdef CONFIG_UART_INTERRUPT_DRIVEN

	/** Interrupt driven FIFO fill function */
	int (*fifo_fill)(struct device *dev, const uint8_t *tx_data, int len);

	/** Interrupt driven FIFO read function */
	int (*fifo_read)(struct device *dev, uint8_t *rx_data, const int size);

	/** Interrupt driven transfer enabling function */
	void (*irq_tx_enable)(struct device *dev);

	/** Interrupt driven transfer disabling function */
	void (*irq_tx_disable)(struct device *dev);

	/** Interrupt driven transfer ready function */
	int (*irq_tx_ready)(struct device *dev);

	/** Interrupt driven receiver enabling function */
	void (*irq_rx_enable)(struct device *dev);

	/** Interrupt driven receiver disabling function */
	void (*irq_rx_disable)(struct device *dev);

	/** Interrupt driven transfer empty function */
	int (*irq_tx_empty)(struct device *dev);

	/** Interrupt driven receiver ready function */
	int (*irq_rx_ready)(struct device *dev);

	/** Interrupt driven error enabling function */
	void (*irq_err_enable)(struct device *dev);

	/** Interrupt driven error disabling function */
	void (*irq_err_disable)(struct device *dev);

	/** Interrupt driven pending status function */
	int (*irq_is_pending)(struct device *dev);

	/** Interrupt driven interrupt update function */
	int (*irq_update)(struct device *dev);

	/** Set the callback function */
	void (*irq_callback_set)(struct device *dev, uart_irq_callback_t cb);

#endif

#ifdef CONFIG_UART_LINE_CTRL
	int (*line_ctrl_set)(struct device *dev, uint32_t ctrl, uint32_t val);
	int (*line_ctrl_get)(struct device *dev, uint32_t ctrl, uint32_t *val);
#endif

#ifdef CONFIG_UART_DRV_CMD
	int (*drv_cmd)(struct device *dev, uint32_t cmd, uint32_t p);
#endif

};

/**
 * @brief Check whether an error was detected.
 *
 * @param dev UART device structure.
 *
 * @retval UART_ERROR_OVERRUN if an overrun error was detected.
 * @retval UART_ERROR_PARITY if a parity error was detected.
 * @retval UART_ERROR_FRAMING if a framing error was detected.
 * @retval UART_ERROR_BREAK if a break error was detected.
 * @retval 0 Otherwise.
 */
static inline int uart_err_check(struct device *dev)
{
	const struct uart_driver_api *api = dev->driver_api;

	if (api->err_check) {
		return api->err_check(dev);
	}
	return 0;
}


/**
 * @brief Poll the device for input.
 *
 * @param dev UART device structure.
 * @param p_char Pointer to character.
 *
 * @retval 0 If a character arrived.
 * @retval -1 If no character was available to read (i.e., the UART
 *            input buffer was empty).
 * @retval -ENOTSUP If the operation is not supported.
 */
static inline int uart_poll_in(struct device *dev, unsigned char *p_char)
{
	const struct uart_driver_api *api = dev->driver_api;

	return api->poll_in(dev, p_char);
}

/**
 * @brief Output a character in polled mode.
 *
 * This routine checks if the transmitter is empty.
 * When the transmitter is empty, it writes a character to the data
 * register.
 *
 * To send a character when hardware flow control is enabled, the handshake
 * signal CTS must be asserted.
 *
 * @param dev UART device structure.
 * @param out_char Character to send.
 *
 * @retval char Sent character.
 */
static inline unsigned char uart_poll_out(struct device *dev,
					  unsigned char out_char)
{
	const struct uart_driver_api *api = dev->driver_api;

	return api->poll_out(dev, out_char);
}


#ifdef CONFIG_UART_INTERRUPT_DRIVEN

/**
 * @brief Fill FIFO with data.
 *
 * @param dev UART device structure.
 * @param tx_data Data to transmit.
 * @param size Number of bytes to send.
 *
 * @return Number of bytes sent.
 */
static inline int uart_fifo_fill(struct device *dev, const uint8_t *tx_data,
				 int size)
{
	const struct uart_driver_api *api = dev->driver_api;

	if (api->fifo_fill) {
		return api->fifo_fill(dev, tx_data, size);
	}

	return 0;
}

/**
 * @brief Read data from FIFO.
 *
 * @param dev UART device structure.
 * @param rx_data Data container.
 * @param size Container size.
 *
 * @return Number of bytes read.
 */
static inline int uart_fifo_read(struct device *dev, uint8_t *rx_data,
				 const int size)
{
	const struct uart_driver_api *api = dev->driver_api;

	if (api->fifo_read) {
		return api->fifo_read(dev, rx_data, size);
	}

	return 0;
}

/**
 * @brief Enable TX interrupt in IER.
 *
 * @param dev UART device structure.
 *
 * @return N/A
 */
static inline void uart_irq_tx_enable(struct device *dev)
{
	const struct uart_driver_api *api = dev->driver_api;

	if (api->irq_tx_enable) {
		api->irq_tx_enable(dev);
	}
}
/**
 * @brief Disable TX interrupt in IER.
 *
 * @param dev UART device structure.
 *
 * @return N/A
 */
static inline void uart_irq_tx_disable(struct device *dev)
{
	const struct uart_driver_api *api = dev->driver_api;

	if (api->irq_tx_disable) {
		api->irq_tx_disable(dev);
	}
}

/**
 * @brief Check if Tx IRQ has been raised.
 *
 * @param dev UART device structure.
 *
 * @retval 1 If an IRQ is ready.
 * @retval 0 Otherwise.
 */
static inline int uart_irq_tx_ready(struct device *dev)
{
	const struct uart_driver_api *api = dev->driver_api;

	if (api->irq_tx_ready) {
		return api->irq_tx_ready(dev);
	}

	return 0;
}

/**
 * @brief Enable RX interrupt in IER.
 *
 * @param dev UART device structure.
 *
 * @return N/A
 */
static inline void uart_irq_rx_enable(struct device *dev)
{
	const struct uart_driver_api *api = dev->driver_api;

	if (api->irq_rx_enable) {
		api->irq_rx_enable(dev);
	}
}

/**
 * @brief Disable RX interrupt in IER.
 *
 * @param dev UART device structure.
 *
 * @return N/A
 */
static inline void uart_irq_rx_disable(struct device *dev)
{
	const struct uart_driver_api *api = dev->driver_api;

	if (api->irq_rx_disable) {
		api->irq_rx_disable(dev);
	}
}

/**
 * @brief Check if nothing remains to be transmitted
 *
 * @param dev UART device structure.
 *
 * @retval 1 If nothing remains to be transmitted.
 * @retval 0 Otherwise.
 */
static inline int uart_irq_tx_empty(struct device *dev)
{
	const struct uart_driver_api *api = dev->driver_api;

	if (api->irq_tx_empty) {
		return api->irq_tx_empty(dev);
	}

	return 0;
}

/**
 * @brief Check if Rx IRQ has been raised.
 *
 * @param dev UART device structure.
 *
 * @retval 1 If an IRQ is ready.
 * @retval 0 Otherwise.
 */
static inline int uart_irq_rx_ready(struct device *dev)
{
	const struct uart_driver_api *api = dev->driver_api;

	if (api->irq_rx_ready) {
		return api->irq_rx_ready(dev);
	}

	return 0;
}
/**
 * @brief Enable error interrupt in IER.
 *
 * @param dev UART device structure.
 *
 * @return N/A
 */
static inline void uart_irq_err_enable(struct device *dev)
{
	const struct uart_driver_api *api = dev->driver_api;

	if (api->irq_err_enable) {
		api->irq_err_enable(dev);
	}
}

/**
 * @brief Disable error interrupt in IER.
 *
 * @param dev UART device structure.
 *
 * @retval 1 If an IRQ is ready.
 * @retval 0 Otherwise.
 */
static inline void uart_irq_err_disable(struct device *dev)
{
	const struct uart_driver_api *api = dev->driver_api;

	if (api->irq_err_disable) {
		api->irq_err_disable(dev);
	}
}

/**
 * @brief Check if any IRQs is pending.
 *
 * @param dev UART device structure.
 *
 * @retval 1 If an IRQ is pending.
 * @retval 0 Otherwise.
 */

static inline int uart_irq_is_pending(struct device *dev)
{
	const struct uart_driver_api *api = dev->driver_api;

	if (api->irq_is_pending)	{
		return api->irq_is_pending(dev);
	}

	return 0;
}

/**
 * @brief Update cached contents of IIR.
 *
 * @param dev UART device structure.
 *
 * @retval 1 Always.
 */
static inline int uart_irq_update(struct device *dev)
{
	const struct uart_driver_api *api = dev->driver_api;

	if (api->irq_update) {
		return api->irq_update(dev);
	}

	return 0;
}

/**
 * @brief Set the IRQ callback function pointer.
 *
 * This sets up the callback for IRQ. When an IRQ is triggered,
 * the specified function will be called.
 *
 * @param dev UART device structure.
 * @param cb Pointer to the callback function.
 *
 * @return N/A
 */
static inline void uart_irq_callback_set(struct device *dev,
					 uart_irq_callback_t cb)
{
	const struct uart_driver_api *api = dev->driver_api;

	if ((api != NULL) && (api->irq_callback_set != NULL)) {
		api->irq_callback_set(dev, cb);
	}
}

#endif

#ifdef CONFIG_UART_LINE_CTRL

/**
 * @brief Manipulate line control for UART.
 *
 * @param dev UART device structure.
 * @param ctrl The line control to manipulate.
 * @param val Value to set to the line control.
 *
 * @retval 0 If successful.
 * @retval failed Otherwise.
 */
static inline int uart_line_ctrl_set(struct device *dev,
				     uint32_t ctrl, uint32_t val)
{
	const struct uart_driver_api *api = dev->driver_api;

	if (api->line_ctrl_set) {
		return api->line_ctrl_set(dev, ctrl, val);
	}

	return -ENOTSUP;
}

/**
 * @brief Retrieve line control for UART.
 *
 * @param dev UART device structure.
 * @param ctrl The line control to manipulate.
 * @param val Value to get for the line control.
 *
 * @retval 0 If successful.
 * @retval failed Otherwise.
 */
static inline int uart_line_ctrl_get(struct device *dev,
				     uint32_t ctrl, uint32_t *val)
{
	const struct uart_driver_api *api = dev->driver_api;

	if (api && api->line_ctrl_get) {
		return api->line_ctrl_get(dev, ctrl, val);
	}

	return -ENOTSUP;
}

#endif /* CONFIG_UART_LINE_CTRL */

#ifdef CONFIG_UART_DRV_CMD

/**
 * @brief Send extra command to driver.
 *
 * Implementation and accepted commands are driver specific.
 * Refer to the drivers for more information.
 *
 * @param dev UART device structure.
 * @param cmd Command to driver.
 * @param p Parameter to the command.
 *
 * @retval 0 If successful.
 * @retval failed Otherwise.
 */
static inline int uart_drv_cmd(struct device *dev, uint32_t cmd, uint32_t p)
{
	const struct uart_driver_api *api = dev->driver_api;

	if (api->drv_cmd) {
		return api->drv_cmd(dev, cmd, p);
	}

	return -ENOTSUP;
}

#endif /* CONFIG_UART_DRV_CMD */

#ifdef __cplusplus
}
#endif

/**
 * @}
 */

#endif /* __INCuarth */