# Kconfig - HDC1008 temperature and humidity sensor configuration options # # Copyright (c) 2016 Intel Corporation # # SPDX-License-Identifier: Apache-2.0 # menuconfig HDC1008 bool prompt "HDC1008 Temperature and Humidity Sensor" depends on SENSOR && I2C && GPIO default n help Enable driver for HDC1008 temperature and humidity sensors. config HDC1008_NAME string prompt "Driver name" default "HDC1008" depends on HDC1008 help Device name with which the HDC1008 sensor is identified. config HDC1008_I2C_ADDR hex prompt "I2C Address for HDC1008" depends on HDC1008 default "0x40" help 0x40: A0 connected GND and A1 connected to GND. 0x41: A0 connected VDD and A1 connected to GND. 0x42: A0 connected GND and A1 connected to VDD. 0x43: A0 connected VDD and A1 connected to VDD. config HDC1008_I2C_MASTER_DEV_NAME string prompt "I2C master where HDC1008 is connected" depends on HDC1008 default "I2C_0" help Specify the device name of the I2C master device to which the HDC1008 chip is connected. config HDC1008_GPIO_DEV_NAME string prompt "GPIO device" default "GPIO_0" depends on HDC1008 help The device name of the GPIO device to which the HDC1008 data-ready pin is connected. config HDC1008_GPIO_PIN_NUM int prompt "Interrupt GPIO pin number" default 0 depends on HDC1008 help The number of the GPIO on which the data-ready signal from the HDC1008 chip will be received.