Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 | menuconfig UART_NS16550
bool "NS16550 serial driver"
default n
select SERIAL_HAS_DRIVER
help
This option enables the NS16550 serial driver.
This driver can be used for the serial hardware
available on x86 boards.
config UART_NS16550_PCI
bool "Enable PCI Support"
default n
depends on PCI && UART_NS16550
help
This enables NS16550 to probe for PCI-based serial devices.
This option enables the driver to auto-detect the device
configuration required to access those ports.
config UART_NS16550_DLF
bool "Enable Divisor Latch Fraction (DLF) support"
default n
depends on UART_NS16550
help
This enables support for divisor latch fraction (DLF).
It is used to limit frequency error.
Says n if you are not sure if hardware supports this.
config UART_NS16550_LINE_CTRL
bool "Enable Serial Line Control for Apps"
default n
depends on UART_LINE_CTRL && UART_NS16550
help
This enables the API for apps to control the serial line,
such as CTS and RTS.
Says n if not sure.
config UART_NS16550_DRV_CMD
bool "Enable Driver Commands"
default n
depends on UART_DRV_CMD && UART_NS16550
help
This enables the API for apps to send commands to driver.
Says n if not sure.
# ---------- Port 0 ----------
menuconfig UART_NS16550_PORT_0
bool "Enable NS16550 Port 0"
default n
depends on UART_NS16550
help
This tells the driver to configure the UART port at boot, depending on
the additional configure options below.
config UART_NS16550_PORT_0_NAME
string "Port 0 Device Name"
default "UART_0"
depends on UART_NS16550_PORT_0
help
This is the device name for UART, and is included in the device
struct.
config UART_NS16550_PORT_0_IRQ_PRI
int "Port 0 Interrupt Priority"
default 0
depends on UART_NS16550_PORT_0
help
The interrupt priority for UART port.
config UART_NS16550_PORT_0_BAUD_RATE
int "Port 0 Baud Rate"
default 0
depends on UART_NS16550_PORT_0
help
The baud rate for UART port to be set to at boot.
Leave at 0 to skip initialization.
config UART_NS16550_PORT_0_OPTIONS
int "Port 0 Options"
default 0
depends on UART_NS16550_PORT_0
help
Options used for port initialization.
config UART_NS16550_PORT_0_DLF
hex "Port 0 DLF value"
default 0x0
depends on UART_NS16550_PORT_0 && UART_NS16550_DLF
help
Value for DLF register.
config UART_NS16550_PORT_0_PCI
bool "Port 0 is PCI-based"
default n
depends on UART_NS16550_PCI && UART_NS16550_PORT_0
help
Obtain port information from PCI.
# ---------- Port 1 ----------
menuconfig UART_NS16550_PORT_1
bool "Enable NS16550 Port 1"
default n
depends on UART_NS16550
help
This tells the driver to configure the UART port at boot, depending on
the additional configure options below.
config UART_NS16550_PORT_1_NAME
string "Port 1 Device Name"
default "UART_1"
depends on UART_NS16550_PORT_1
help
This is the device name for UART, and is included in the device
struct.
config UART_NS16550_PORT_1_IRQ_PRI
int "Port 1 Interrupt Priority"
default 0
depends on UART_NS16550_PORT_1
help
The interrupt priority for UART port.
config UART_NS16550_PORT_1_BAUD_RATE
int "Port 1 Baud Rate"
default 0
depends on UART_NS16550_PORT_1
help
The baud rate for UART port to be set to at boot.
Leave at 0 to skip initialization.
config UART_NS16550_PORT_1_OPTIONS
int "Port 1 Options"
default 0
depends on UART_NS16550_PORT_1
help
Options used for port initialization.
config UART_NS16550_PORT_1_DLF
hex "Port 1 DLF value"
default 0x0
depends on UART_NS16550_PORT_1 && UART_NS16550_DLF
help
Value for DLF register.
|