Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 | /*
* Copyright (c) 2016 Intel Corporation
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include <i2c.h>
#include <init.h>
#include <misc/__assert.h>
#include <misc/byteorder.h>
#include <sensor.h>
#include <string.h>
#include "sensor_hts221.h"
static int hts221_channel_get(struct device *dev,
enum sensor_channel chan,
struct sensor_value *val)
{
struct hts221_data *drv_data = dev->driver_data;
int32_t conv_val;
__ASSERT_NO_MSG(chan == SENSOR_CHAN_TEMP || SENSOR_CHAN_HUMIDITY);
/*
* see "Interpreting humidity and temperature readings" document
* for more details
*/
if (chan == SENSOR_CHAN_TEMP) {
conv_val = (int32_t)(drv_data->t1_degc_x8 -
drv_data->t0_degc_x8) *
(drv_data->t_sample - drv_data->t0_out) /
(drv_data->t1_out - drv_data->t0_out) +
drv_data->t0_degc_x8;
/* convert temperature x8 to degrees Celsius */
val->type = SENSOR_VALUE_TYPE_INT_PLUS_MICRO;
val->val1 = conv_val / 8;
val->val2 = (conv_val % 8) * (1000000 / 8);
} else { /* SENSOR_CHAN_HUMIDITY */
conv_val = (int32_t)(drv_data->h1_rh_x2 - drv_data->h0_rh_x2) *
(drv_data->rh_sample - drv_data->h0_t0_out) /
(drv_data->h1_t0_out - drv_data->h0_t0_out) +
drv_data->h0_rh_x2;
/* convert humidity x2 to mili-percent */
val->type = SENSOR_VALUE_TYPE_INT_PLUS_MICRO;
val->val1 = conv_val * 500;
val->val2 = 0;
}
return 0;
}
static int hts221_sample_fetch(struct device *dev, enum sensor_channel chan)
{
struct hts221_data *drv_data = dev->driver_data;
uint8_t buf[4];
__ASSERT_NO_MSG(chan == SENSOR_CHAN_ALL);
if (i2c_burst_read(drv_data->i2c, HTS221_I2C_ADDR,
HTS221_REG_DATA_START | HTS221_AUTOINCREMENT_ADDR,
buf, 4) < 0) {
SYS_LOG_ERR("Failed to fetch data sample.");
return -EIO;
}
drv_data->rh_sample = sys_le16_to_cpu(buf[0] | (buf[1] << 8));
drv_data->t_sample = sys_le16_to_cpu(buf[2] | (buf[3] << 8));
return 0;
}
static int hts221_read_conversion_data(struct hts221_data *drv_data)
{
uint8_t buf[16];
if (i2c_burst_read(drv_data->i2c, HTS221_I2C_ADDR,
HTS221_REG_CONVERSION_START |
HTS221_AUTOINCREMENT_ADDR, buf, 16) < 0) {
SYS_LOG_ERR("Failed to read conversion data.");
return -EIO;
}
drv_data->h0_rh_x2 = buf[0];
drv_data->h1_rh_x2 = buf[1];
drv_data->t0_degc_x8 = sys_le16_to_cpu(buf[2] | ((buf[5] & 0x3) << 8));
drv_data->t1_degc_x8 = sys_le16_to_cpu(buf[3] | ((buf[5] & 0xC) << 6));
drv_data->h0_t0_out = sys_le16_to_cpu(buf[6] | (buf[7] << 8));
drv_data->h1_t0_out = sys_le16_to_cpu(buf[10] | (buf[11] << 8));
drv_data->t0_out = sys_le16_to_cpu(buf[12] | (buf[13] << 8));
drv_data->t1_out = sys_le16_to_cpu(buf[14] | (buf[15] << 8));
return 0;
}
static struct sensor_driver_api hts221_driver_api = {
#if CONFIG_HTS221_TRIGGER
.trigger_set = hts221_trigger_set,
#endif
.sample_fetch = hts221_sample_fetch,
.channel_get = hts221_channel_get,
};
int hts221_init(struct device *dev)
{
struct hts221_data *drv_data = dev->driver_data;
uint8_t id, idx;
drv_data->i2c = device_get_binding(CONFIG_HTS221_I2C_MASTER_DEV_NAME);
if (drv_data->i2c == NULL) {
SYS_LOG_ERR("Could not get pointer to %s device.",
CONFIG_HTS221_I2C_MASTER_DEV_NAME);
return -EINVAL;
}
/* check chip ID */
if (i2c_reg_read_byte(drv_data->i2c, HTS221_I2C_ADDR,
HTS221_REG_WHO_AM_I, &id) < 0) {
SYS_LOG_ERR("Failed to read chip ID.");
return -EIO;
}
if (id != HTS221_CHIP_ID) {
SYS_LOG_ERR("Invalid chip ID.");
return -EINVAL;
}
/* check if CONFIG_HTS221_ODR is valid */
for (idx = 0; idx < ARRAY_SIZE(hts221_odr_strings); idx++) {
if (!strcmp(hts221_odr_strings[idx], CONFIG_HTS221_ODR)) {
break;
}
}
if (idx == ARRAY_SIZE(hts221_odr_strings)) {
SYS_LOG_ERR("Invalid ODR value.");
return -EINVAL;
}
if (i2c_reg_write_byte(drv_data->i2c, HTS221_I2C_ADDR, HTS221_REG_CTRL1,
(idx + 1) << HTS221_ODR_SHIFT | HTS221_BDU_BIT |
HTS221_PD_BIT) < 0) {
SYS_LOG_ERR("Failed to configure chip.");
return -EIO;
}
if (hts221_read_conversion_data(drv_data) < 0) {
SYS_LOG_ERR("Failed to read conversion data.");
return -EINVAL;
}
#ifdef CONFIG_HTS221_TRIGGER
if (hts221_init_interrupt(dev) < 0) {
SYS_LOG_ERR("Failed to initialize interrupt.");
return -EIO;
}
#endif
dev->driver_api = &hts221_driver_api;
return 0;
}
struct hts221_data hts221_driver;
DEVICE_INIT(hts221, CONFIG_HTS221_NAME, hts221_init, &hts221_driver,
NULL, SECONDARY, CONFIG_HTS221_INIT_PRIORITY);
|