1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 | menuconfig UART_STELLARIS
bool "Stellaris serial driver"
default n
select SERIAL_HAS_DRIVER
help
This option enables the Stellaris serial driver.
This specific driver can be used for the serial hardware
available at the Texas Instrument LM3S6965 platform.
# ---------- Port 0 ----------
menuconfig UART_STELLARIS_PORT_0
bool "Enable Stellaris UART Port 0"
default n
depends on UART_STELLARIS
help
This tells the driver to configure the UART port at boot, depending on
the additional configure options below.
config UART_STELLARIS_PORT_0_NAME
string "Port 0 Device Name"
default "UART_0"
depends on UART_STELLARIS_PORT_0
help
This is the device name for UART, and is included in the device
struct.
config UART_STELLARIS_PORT_0_IRQ_PRI
int "Port 0 Interrupt Priority"
default 0
depends on UART_STELLARIS_PORT_0
help
The interrupt priority for UART port.
config UART_STELLARIS_PORT_0_BAUD_RATE
int "Port 0 Baud Rate"
default 0
depends on UART_STELLARIS_PORT_0
help
The baud rate for UART port to be set to at boot.
Leave at 0 to skip initialization.
# ---------- Port 1 ----------
menuconfig UART_STELLARIS_PORT_1
bool "Enable Stellaris UART Port 1"
default n
depends on UART_STELLARIS
help
This tells the driver to configure the UART port at boot, depending on
the additional configure options below.
config UART_STELLARIS_PORT_1_NAME
string "Port 1 Device Name"
default "UART_1"
depends on UART_STELLARIS_PORT_1
help
This is the device name for UART, and is included in the device
struct.
config UART_STELLARIS_PORT_1_IRQ_PRI
int "Port 1 Interrupt Priority"
default 0
depends on UART_STELLARIS_PORT_1
help
The interrupt priority for UART port.
config UART_STELLARIS_PORT_1_BAUD_RATE
int "Port 1 Baud Rate"
default 0
depends on UART_STELLARIS_PORT_1
help
The baud rate for UART port to be set to at boot.
Leave at 0 to skip initialization.
# ---------- Port 2 ----------
menuconfig UART_STELLARIS_PORT_2
bool "Enable Stellaris UART Port 2"
default n
depends on UART_STELLARIS
help
This tells the driver to configure the UART port at boot, depending on
the additional configure options below.
config UART_STELLARIS_PORT_2_NAME
string "Port 2 Device Name"
default "UART_2"
depends on UART_STELLARIS_PORT_2
help
This is the device name for UART, and is included in the device
struct.
config UART_STELLARIS_PORT_2_IRQ_PRI
int "Port 2 Interrupt Priority"
default 0
depends on UART_STELLARIS_PORT_2
help
The interrupt priority for UART port.
config UART_STELLARIS_PORT_2_BAUD_RATE
int "Port 2 Baud Rate"
default 0
depends on UART_STELLARIS_PORT_2
help
The baud rate for UART port to be set to at boot.
Leave at 0 to skip initialization.
|