# Kconfig - IEEE 802.15.4 driver configuration options
# Copyright (c) 2015 Intel Corporation
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
# 1) Redistributions of source code must retain the above copyright notice,
# this list of conditions and the following disclaimer.
# 2) Redistributions in binary form must reproduce the above copyright notice,
# this list of conditions and the following disclaimer in the documentation
# and/or other materials provided with the distribution.
# 3) Neither the name of Intel Corporation nor the names of its contributors
# may be used to endorse or promote products derived from this software without
# specific prior written permission.
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
# IEEE 802.15.4 options
menu "IEEE 802.15.4 Options"
depends on NETWORKING_WITH_15_4
bool "CC2520 driver debug"
This option enables debug support for 802.15.4 CC2520 driver.
string "TI CC2520 Driver's name"
This option sets the driver name
string "SPI driver's name to use to access CC2520"
This option is mandatory to set which SPI controller to use in order
to actually control the CC2520 chip.
int "SPI system frequency"
This option sets the SPI controller's frequency. Beware this value
depends on the SPI controller being used and also on the system
int "SPI slave linked to CC2520"
This option sets the SPI slave number SPI controller has to switch
to when dealing with CC2520 chip.
int "Driver's internal fiber stack size"
This option sets the driver's stack size for its internal fiber.
The default value should be sufficient, but it case it prooves to be
a too little, this option makes it easy to play with the size.
int "TI CC2520 Channel"
range 11 26
All the 802.15.4 devices that want to connect to each other need
to have same channel. Default channel is 26.
bool "Let the chip handling CRC on reception"
When receiving a packet, the hardware can verify the CRC by itself
and will provide a flag letting know the success - or not - on
a flag on the footer.
bool "Forward RSSI and link information on reception to upper stack"
If necessary, it will be possible to grab link and RSSI information
from the packet footer and forward them to the above stack.
bool "Let the chip handle TX/RX IEEE 802.15.4 ACK requests"
The chip is able to reply by itself to ACK requests as well as
waiting for an ACK when a TX packet is requesting an ACK. However,
this feature requires the chip to get hardware filtering on, and
thus the above stack needs to provide the right information for such
filtering feature to work.