/*
 * Copyright (c) 2012-2015 Wind River Systems, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

/*
 * @file
 * @brief Test nanokernel timer APIs
 *
 * This module tests the following timer related routines:
 *  nano_timer_init(), nano_fiber_timer_start(), nano_fiber_timer_stop(),
 *  nano_fiber_timer_test(), nano_task_timer_start(),
 *  nano_task_timer_stop(), nano_task_timer_test(),
 *  sys_tick_get_32(), sys_cycle_get_32(), sys_tick_delta()
 */

#include <tc_util.h>
#include <arch/cpu.h>

#define TWO_SECONDS     (2 * sys_clock_ticks_per_sec)
#define SIX_SECONDS     (6 * sys_clock_ticks_per_sec)

#define SHORT_TIMEOUT   (1 * sys_clock_ticks_per_sec)
#define LONG_TIMEOUT    (5 * sys_clock_ticks_per_sec)
#define MID_TIMEOUT     (3 * sys_clock_ticks_per_sec)

#ifndef FIBER_STACKSIZE
#define FIBER_STACKSIZE    2000
#endif
#define FIBER_PRIORITY     4

#ifndef FIBER2_STACKSIZE
#define FIBER2_STACKSIZE   2000
#endif
#define FIBER2_PRIORITY    10

typedef void  (*timer_start_func)(struct nano_timer *, int);
typedef void  (*timer_stop_func)(struct nano_timer *);
typedef void* (*timer_test_func)(struct nano_timer *, int32_t);

static struct nano_timer  timer;
static struct nano_timer  shortTimer;
static struct nano_timer  longTimer;
static struct nano_timer  midTimer;

static struct nano_sem    wakeTask;
static struct nano_sem    wakeFiber;

static void *timerData[1];
static void *shortTimerData[1];
static void *longTimerData[1];
static void *midTimerData[1];

static int  fiberDetectedError = 0;
static char __stack fiberStack[FIBER_STACKSIZE];
static char __stack fiber2Stack[FIBER2_STACKSIZE];

/**
 *
 * @brief Initialize nanokernel objects
 *
 * This routine initializes the nanokernel objects used in the LIFO tests.
 *
 * @return N/A
 */

void initNanoObjects(void)
{
	nano_timer_init(&timer, timerData);
	nano_timer_init(&shortTimer, shortTimerData);
	nano_timer_init(&longTimer, longTimerData);
	nano_timer_init(&midTimer, midTimerData);
	nano_sem_init(&wakeTask);
	nano_sem_init(&wakeFiber);
}

/**
 *
 * @brief Basic checking of time spent waiting upon a timer
 *
 * This routine can be called from a task or a fiber to wait upon a timer.
 * It will busy wait until the current tick ends, at which point it will
 * start and then wait upon a timer.  The length of time it spent waiting
 * gets cross-checked with the sys_tick_get_32() and nanoTimeElapsed() APIs.
 * All three are expected to match up, but a tolerance of one (1) tick is
 * considered acceptable.
 *
 * This routine can be considered as testing sys_tick_get_32(),
 * nanoTimeElapsed() and nanoXXXTimerGetW() successful expiration cases.
 *
 * @param startRtn      routine to start the timer
 * @param testRtn       routine to get and wait for the timer
 * @param pTimer        pointer to the timer
 * @param pTimerData    pointer to the expected timer data
 * @param ticks         number of ticks to wait
 *
 * @return TC_PASS on success, TC_FAIL on failure
 */

int basicTimerWait(timer_start_func startRtn, timer_test_func testRtn,
				   struct nano_timer *pTimer, void *pTimerData, int ticks)
{
	int64_t  reftime;          /* reference time for tick delta */
	uint32_t  tick;            /* current tick */
	uint32_t  elapsed_32;      /* # of elapsed ticks for 32-bit functions*/
	int64_t  elapsed;          /* # of elapsed ticks */
	uint32_t  duration;        /* duration of the test in ticks */
	void     *result;          /* value returned from timer get routine */
	int       busywaited = 0;  /* non-zero if <testRtn> returns NULL */

	TC_PRINT("  - test expected to take four seconds\n");

	tick = sys_tick_get_32();
	while (sys_tick_get_32() == tick) {
		/* Align to a tick boundary */
	}

	tick++;
	(void) sys_tick_delta(&reftime);
	startRtn(pTimer, ticks);       /* Start the timer */
	result = testRtn(pTimer, TICKS_UNLIMITED);/* Wait for the timer to expire */

	elapsed_32 = sys_tick_delta_32(&reftime);
	duration = sys_tick_get_32() - tick;

	/*
	 * The difference between <duration> and <elapsed> is expected to be zero
	 * however, the test is allowing for tolerance of an extra tick in case of
	 * timing variations.
	 */

	if ((result != pTimerData) ||
		(duration - elapsed_32 > 1) || ((duration - ticks) > 1)) {
		return TC_FAIL;
	}

	/* Check that the non-wait-timer-get routine works properly. */
	tick = sys_tick_get_32();
	while (sys_tick_get_32() == tick) {
		/* Align to a tick boundary */
	}

	tick++;
	(void) sys_tick_delta(&reftime);
	startRtn(pTimer, ticks);       /* Start the timer */
	while ((result = testRtn(pTimer, TICKS_NONE)) == NULL) {
		busywaited = 1;
	}
	elapsed = sys_tick_delta(&reftime);
	duration = sys_tick_get_32() - tick;

	if ((busywaited != 1) || (result != pTimerData) ||
		(duration - elapsed > 1) || ((duration - ticks) > 1)) {
		return TC_FAIL;
	}

	return TC_PASS;
}

/**
 *
 * @brief Start four timers
 *
 * This routine starts four timers.
 * The first (<timer>) is added to an empty list of timers.
 * The second (<longTimer>) is added to the end of the list of timers.
 * The third (<shortTimer>) is added to the head of the list of timers.
 * The fourth (<midTimer>) is added to the middle of the list of timers.
 *
 * Four timers are used so that the various paths can be tested.
 *
 * @param startRtn    routine to start the timers
 *
 * @return N/A
 */

void startTimers(timer_start_func startRtn)
{
	int  tick;                    /* current tick */

	tick = sys_tick_get_32();
	while (sys_tick_get_32() == tick) {
		/* Wait for the end of the tick */
	}

	startRtn(&timer, TWO_SECONDS);
	startRtn(&longTimer, LONG_TIMEOUT);
	startRtn(&shortTimer, SHORT_TIMEOUT);
	startRtn(&midTimer, MID_TIMEOUT);
}

/**
 *
 * @brief Busy wait while checking timers expire in the correct order
 *
 * This routine checks that the four timers created using startTimers() finish
 * in the correct order.  It busy waits on all four timers waiting until they
 * expire.  The timers are expected to expire in the following order:
 *     <shortTimer>, <timer>, <midTimer>, <longTimer>
 *
 * @param testRtn    timer wait routine (fiber or task)
 *
 * @return TC_PASS on success, TC_FAIL on failure
 */

int busyWaitTimers(timer_test_func testRtn)
{
	int      numExpired = 0; /* # of expired timers */
	void    *result;         /* value returned from <testRtn> */
	uint32_t ticks;          /* tick by which time test should be complete */

	TC_PRINT("  - test expected to take five or six seconds\n");

	ticks = sys_tick_get_32() + SIX_SECONDS;
	while ((numExpired != 4) && (sys_tick_get_32() < ticks)) {
		result = testRtn(&timer, TICKS_NONE);
		if (result != NULL) {
			numExpired++;
			if ((result != timerData) || (numExpired != 2)) {
				TC_ERROR("Expected <timer> to expire 2nd, not 0x%x\n",
						 result);
				return TC_FAIL;
			}
		}

		result = testRtn(&shortTimer, TICKS_NONE);
		if (result != NULL) {
			numExpired++;
			if ((result != shortTimerData) || (numExpired != 1)) {
				TC_ERROR("Expected <shortTimer> to expire 1st, not 0x%x\n",
						 result);
				return TC_FAIL;
			}
		}

		result = testRtn(&midTimer, TICKS_NONE);
		if (result != NULL) {
			numExpired++;
			if ((result != midTimerData) || (numExpired != 3)) {
				TC_ERROR("Expected <midTimer> to expire 3rd, not 0x%x\n",
						 result);
				return TC_FAIL;
			}
		}

		result = testRtn(&longTimer, TICKS_NONE);
		if (result != NULL) {
			numExpired++;
			if ((result != longTimerData) || (numExpired != 4)) {
				TC_ERROR("Expected <longTimer> to expire 4th, not 0x%x\n",
						 result);
				return TC_FAIL;
			}
		}
	}

	return (sys_tick_get_32() < ticks) ? TC_PASS : TC_FAIL;
}

/**
 *
 * @brief Stop the four timers and make sure they did not expire
 *
 * This routine stops the four started timers and then checks the timers for
 * six seconds to make sure that they did not fire.  The four timers will be
 * stopped in the reverse order in which they were started.  Doing so will
 * exercise the code that removes timers from important locations in the list;
 * these include the middle, the head, the tail, and the last item.
 *
 * @param stopRtn    routine to stop timer (fiber or task)
 * @param testRtn    timer wait routine (fiber or task)
 *
 * @return TC_PASS on success, TC_FAIL on failure
 */

int stopTimers(timer_stop_func stopRtn, timer_test_func testRtn)
{
	int  startTick;      /* tick at which test starts */
	int  endTick;        /* tick by which test should be completed */

	stopRtn(&midTimer);
	stopRtn(&shortTimer);
	stopRtn(&longTimer);
	stopRtn(&timer);

	TC_PRINT("  - test expected to take six seconds\n");

	startTick = sys_tick_get_32();
	while (sys_tick_get_32() == startTick) {
	}
	startTick++;
	endTick = startTick + SIX_SECONDS;

	while (sys_tick_get_32() < endTick) {
		if ((testRtn(&timer, TICKS_NONE) != NULL) ||
			(testRtn(&shortTimer, TICKS_NONE) != NULL) ||
			(testRtn(&midTimer, TICKS_NONE) != NULL) ||
			(testRtn(&longTimer, TICKS_NONE) != NULL)) {
			return TC_FAIL;
		}
	}

	return TC_PASS;
}

/**
 *
 * @brief Entry point for the second fiber
 *
 * The second fiber has a lower priority than the first, but is still given
 * precedence over the task.
 *
 * @param arg1    unused
 * @param arg2    unused
 *
 * @return N/A
 */

static void fiber2Entry(int arg1, int arg2)
{
	ARG_UNUSED(arg1);
	ARG_UNUSED(arg2);

	nano_fiber_timer_stop(&timer);
}

/**
 *
 * @brief Entry point for the fiber portion of the timer tests
 *
 * NOTE: The fiber portion of the tests have higher priority than the task
 * portion of the tests.
 *
 * @param arg1    unused
 * @param arg2    unused
 *
 * @return N/A
 */

static void fiberEntry(int arg1, int arg2)
{
	int  rv;      /* return value from a test */
	void *result; /* return value from timer wait routine */

	ARG_UNUSED(arg1);
	ARG_UNUSED(arg2);

	TC_PRINT("Fiber testing basic timer functionality\n");

	rv = basicTimerWait(nano_fiber_timer_start, nano_fiber_timer_test,
						&timer, timerData, TWO_SECONDS);

	nano_fiber_sem_give(&wakeTask);
	if (rv != TC_PASS) {
		fiberDetectedError = 1;
		return;
	}
	/* Wait forever - let task run */
	nano_fiber_sem_take(&wakeFiber, TICKS_UNLIMITED);

	/* Check that timers expire in the correct order */
	TC_PRINT("Fiber testing timers expire in the correct order\n");
	startTimers(nano_fiber_timer_start);
	rv = busyWaitTimers(nano_fiber_timer_test);
	nano_fiber_sem_give(&wakeTask);
	if (rv != TC_PASS) {
		fiberDetectedError = 2;
		return;
	}
	/* Wait forever - let task run */
	nano_fiber_sem_take(&wakeFiber, TICKS_UNLIMITED);

	/* Check that timers can be stopped */
	TC_PRINT("Task testing the stopping of timers\n");
	startTimers(nano_fiber_timer_start);
	rv = stopTimers(nano_fiber_timer_stop, nano_fiber_timer_test);
	nano_fiber_sem_give(&wakeTask);
	if (rv != TC_PASS) {
		fiberDetectedError = 3;
		return;
	}
	/* Wait forever - let task run */
	nano_fiber_sem_take(&wakeFiber, TICKS_UNLIMITED);

	/* Fiber to wait on a timer that will be stopped by another fiber */
	TC_PRINT("Fiber to stop a timer that has a waiting fiber\n");
	fiber_fiber_start(fiber2Stack, FIBER2_STACKSIZE, fiber2Entry,
					  0, 0, FIBER2_PRIORITY, 0);
	nano_fiber_timer_start(&timer, TWO_SECONDS);   /* Start timer */
	result = nano_fiber_timer_test(&timer, TICKS_UNLIMITED); /* Wait on timer */
	/* Control switches to newly created fiber #2 before coming back. */
	if (result != NULL) {
		fiberDetectedError = 4;
		nano_fiber_sem_give(&wakeTask);
		return;
	}

	/* Fiber to wait on timer that will be stopped by the task */
	TC_PRINT("Task to stop a timer that has a waiting fiber\n");
	nano_fiber_sem_give(&wakeTask);
	nano_fiber_timer_start(&timer, TWO_SECONDS);
	result = nano_fiber_timer_test(&timer, TICKS_UNLIMITED);
	if (result != NULL) {
		fiberDetectedError = 5;
		return;
	}

	nano_fiber_sem_give(&wakeTask);
}

/**
 *
 * @brief Test the sys_cycle_get_32() API
 *
 * @return TC_PASS on success, TC_FAIL on failure
 */

int sys_cycle_get_32Test(void)
{
	uint32_t  timeStamp1;
	uint32_t  timeStamp2;
	int       i;

	timeStamp2 = sys_cycle_get_32();
	for (i = 0; i < 1000000; i++) {
		timeStamp1 = timeStamp2;
		timeStamp2 = sys_cycle_get_32();

		if (timeStamp2 < timeStamp1) {
			TC_ERROR("Timestamp value not increasing with successive calls\n");
			return TC_FAIL;
		}
	}

	return TC_PASS;
}

/**
 *
 * @brief Entry point to timer tests
 *
 * This is the entry point to the timer tests.
 *
 * @return N/A
 */

void main(void)
{
	int     rv;       /* return value from tests */

	TC_START("Test Nanokernel Timer");

	initNanoObjects();

	TC_PRINT("Task testing basic timer functionality\n");
	rv = basicTimerWait(nano_task_timer_start, nano_task_timer_test,
						&timer, timerData, TWO_SECONDS);
	if (rv != TC_PASS) {
		TC_ERROR("Task-level of waiting for timers failed\n");
		goto doneTests;
	}

	/* Check that timers expire in the correct order */
	TC_PRINT("Task testing timers expire in the correct order\n");
	startTimers(nano_task_timer_start);
	rv = busyWaitTimers(nano_task_timer_test);
	if (rv != TC_PASS) {
		TC_ERROR("Task-level timer expiration order failed\n");
		goto doneTests;
	}

	/* Check that timers can be stopped */
	TC_PRINT("Task testing the stopping of timers\n");
	startTimers(nano_task_timer_start);
	rv = stopTimers(nano_task_timer_stop, nano_task_timer_test);
	if (rv != TC_PASS) {
		TC_ERROR("Task-level stopping of timers test failed\n");
		goto doneTests;
	}

	/*
	 * Start the fiber.  The fiber will be given a higher priority than the
	 * main task.
	 */

	task_fiber_start(fiberStack, FIBER_STACKSIZE, fiberEntry,
					 0, 0, FIBER_PRIORITY, 0);

	nano_task_sem_take(&wakeTask, TICKS_UNLIMITED);

	if (fiberDetectedError == 1) {
		TC_ERROR("Fiber-level of waiting for timers failed\n");
		rv = TC_FAIL;
		goto doneTests;
	}

	nano_task_sem_give(&wakeFiber);
	nano_task_sem_take(&wakeTask, TICKS_UNLIMITED);

	if (fiberDetectedError == 2) {
		TC_ERROR("Fiber-level timer expiration order failed\n");
		rv = TC_FAIL;
		goto doneTests;
	}

	nano_task_sem_give(&wakeFiber);
	nano_task_sem_take(&wakeTask, TICKS_UNLIMITED);

	if (fiberDetectedError == 3) {
		TC_ERROR("Fiber-level stopping of timers test failed\n");
		rv = TC_FAIL;
		goto doneTests;
	}

	nano_task_sem_give(&wakeFiber);
	nano_task_sem_take(&wakeTask, TICKS_UNLIMITED);
	if (fiberDetectedError == 4) {
		TC_ERROR("Fiber stopping a timer waited upon by a fiber failed\n");
		rv = TC_FAIL;
		goto doneTests;
	}
	nano_task_timer_stop(&timer);

	if (fiberDetectedError == 5) {
		TC_ERROR("Task stopping a timer waited upon by a fiber failed\n");
		rv = TC_FAIL;
		goto doneTests;
	}

	nano_task_sem_take(&wakeTask, TICKS_UNLIMITED);

#if 0
	/*
	 * Due to recent changes in the i8253 file that correct an issue on real
	 * hardware, this test will fail when run under QEMU.  On QEMU, the i8253
	 * timer can at appear to run backwards.  This can generate a false
	 * failure detection when this test is run under QEMU as part of the
	 * standard sanity/regression checks.  This suggests that the test is not
	 * of high enough quality to be included during the standard sanity/
	 * regression checks.
	 */

	TC_PRINT("Task testing of sys_cycle_get_32()\n");
	rv = sys_cycle_get_32Test();
	if (rv != TC_PASS) {
		TC_ERROR("sys_cycle_get_32Test() failed\n");
		goto doneTests;
		}
#endif

doneTests:
	TC_END_RESULT(rv);
	TC_END_REPORT(rv);
}