Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 | /* * Copyright (c) 2016 Intel Corporation * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #include <i2c.h> #include <init.h> #include <sensor.h> #include "sensor_lis3dh.h" static int lis3dh_i2c_read(struct lis3dh_data *drv_data, uint8_t cmd, uint8_t *buff, int buff_len) { struct i2c_msg msgs[2] = { { .buf = &cmd, .len = 1, .flags = I2C_MSG_WRITE | I2C_MSG_RESTART, }, { .buf = buff, .len = buff_len, .flags = I2C_MSG_READ | I2C_MSG_STOP, }, }; return i2c_transfer(drv_data->i2c, msgs, 2, LIS3DH_I2C_ADDRESS); } static inline int lis3dh_reg_burst_read(struct lis3dh_data *drv_data, uint8_t reg, uint8_t *buff, int buff_len) { reg = reg | LIS3DH_AUTOINCREMENT_ADDR; return lis3dh_i2c_read(drv_data, reg, buff, buff_len); } static inline int lis3dh_reg_read(struct lis3dh_data *drv_data, uint8_t reg, uint8_t *val) { return lis3dh_reg_burst_read(drv_data, reg, val, 1); } int lis3dh_reg_write(struct lis3dh_data *drv_data, uint8_t reg, uint8_t val) { uint8_t tx_buf[2] = {reg, val}; return i2c_write(drv_data->i2c, tx_buf, sizeof(tx_buf), LIS3DH_I2C_ADDRESS); } static int lis3dh_channel_get(struct device *dev, enum sensor_channel chan, struct sensor_value *val) { struct lis3dh_data *drv_data = dev->driver_data; int64_t raw_val; if (chan == SENSOR_CHAN_ACCEL_X) { raw_val = drv_data->x_sample; } else if (chan == SENSOR_CHAN_ACCEL_Y) { raw_val = drv_data->y_sample; } else if (chan == SENSOR_CHAN_ACCEL_Z) { raw_val = drv_data->z_sample; } else { return -ENOTSUP; } /* val = raw_val * LIS3DH_ACCEL_SCALE / (10^6 * (2^16 - 1)) */ val->type = SENSOR_TYPE_INT_PLUS_MICRO; raw_val = raw_val * LIS3DH_ACCEL_SCALE / 1000000; val->val1 = raw_val / 0xFFFF; val->val2 = (raw_val % 0xFFFF) * 1000000 / 0xFFFF; /* normalize val to make sure val->val2 is positive */ if (val->val2 < 0) { val->val1 -= 1; val->val2 += 1000000; } return 0; } int lis3dh_sample_fetch(struct device *dev) { struct lis3dh_data *drv_data = dev->driver_data; uint8_t buf[6]; int rc; /* * since all accel data register addresses are consecutive, * a burst read can be used to read all the samples */ rc = lis3dh_reg_burst_read(drv_data, LIS3DH_REG_ACCEL_X_LSB, buf, 6); if (rc != 0) { DBG("Could not read accel axis data\n"); return -EIO; } drv_data->x_sample = (buf[1] << 8) | buf[0]; drv_data->y_sample = (buf[3] << 8) | buf[2]; drv_data->z_sample = (buf[5] << 8) | buf[4]; return 0; } static struct sensor_driver_api lis3dh_driver_api = { #if CONFIG_LIS3DH_TRIGGER .trigger_set = lis3dh_trigger_set, #endif .sample_fetch = lis3dh_sample_fetch, .channel_get = lis3dh_channel_get, }; int lis3dh_init(struct device *dev) { struct lis3dh_data *drv_data = dev->driver_data; int rc; dev->driver_api = &lis3dh_driver_api; drv_data->i2c = device_get_binding(CONFIG_LIS3DH_I2C_MASTER_DEV_NAME); if (drv_data->i2c == NULL) { DBG("Could not get pointer to %s device\n", CONFIG_LIS3DH_I2C_MASTER_DEV_NAME); return -EINVAL; } /* enable accel measurements and set power mode and data rate */ rc = lis3dh_reg_write(drv_data, LIS3DH_REG_CTRL1, LIS3DH_ACCEL_EN_BITS | LIS3DH_LP_EN_BIT | LIS3DH_ODR_BITS); if (rc != 0) { DBG("Failed to configure chip.\n"); } /* set full scale range */ rc = lis3dh_reg_write(drv_data, LIS3DH_REG_CTRL4, LIS3DH_FS_BITS); if (rc != 0) { DBG("Failed to set full scale range.\n"); return -EIO; } #ifdef CONFIG_LIS3DH_TRIGGER rc = lis3dh_init_interrupt(dev); if (rc != 0) { DBG("Failed to initialize interrupts.\n"); return -EIO; } #endif return 0; } struct lis3dh_data lis3dh_driver; DEVICE_INIT(lis3dh, CONFIG_LIS3DH_NAME, lis3dh_init, &lis3dh_driver, NULL, SECONDARY, CONFIG_LIS3DH_INIT_PRIORITY); |