Loading...
/* ---------------------------------------------------------------------------- */
/* Atmel Microcontroller Software Support */
/* SAM Software Package License */
/* ---------------------------------------------------------------------------- */
/* Copyright (c) %copyright_year%, Atmel Corporation */
/* */
/* All rights reserved. */
/* */
/* Redistribution and use in source and binary forms, with or without */
/* modification, are permitted provided that the following condition is met: */
/* */
/* - Redistributions of source code must retain the above copyright notice, */
/* this list of conditions and the disclaimer below. */
/* */
/* Atmel's name may not be used to endorse or promote products derived from */
/* this software without specific prior written permission. */
/* */
/* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR */
/* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF */
/* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE */
/* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, */
/* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT */
/* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, */
/* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF */
/* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING */
/* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, */
/* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */
/* ---------------------------------------------------------------------------- */
#ifndef _SAM4S_UART1_INSTANCE_
#define _SAM4S_UART1_INSTANCE_
/* ========== Register definition for UART1 peripheral ========== */
#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
#define REG_UART1_CR (0x400E0800U) /**< \brief (UART1) Control Register */
#define REG_UART1_MR (0x400E0804U) /**< \brief (UART1) Mode Register */
#define REG_UART1_IER (0x400E0808U) /**< \brief (UART1) Interrupt Enable Register */
#define REG_UART1_IDR (0x400E080CU) /**< \brief (UART1) Interrupt Disable Register */
#define REG_UART1_IMR (0x400E0810U) /**< \brief (UART1) Interrupt Mask Register */
#define REG_UART1_SR (0x400E0814U) /**< \brief (UART1) Status Register */
#define REG_UART1_RHR (0x400E0818U) /**< \brief (UART1) Receive Holding Register */
#define REG_UART1_THR (0x400E081CU) /**< \brief (UART1) Transmit Holding Register */
#define REG_UART1_BRGR (0x400E0820U) /**< \brief (UART1) Baud Rate Generator Register */
#define REG_UART1_RPR (0x400E0900U) /**< \brief (UART1) Receive Pointer Register */
#define REG_UART1_RCR (0x400E0904U) /**< \brief (UART1) Receive Counter Register */
#define REG_UART1_TPR (0x400E0908U) /**< \brief (UART1) Transmit Pointer Register */
#define REG_UART1_TCR (0x400E090CU) /**< \brief (UART1) Transmit Counter Register */
#define REG_UART1_RNPR (0x400E0910U) /**< \brief (UART1) Receive Next Pointer Register */
#define REG_UART1_RNCR (0x400E0914U) /**< \brief (UART1) Receive Next Counter Register */
#define REG_UART1_TNPR (0x400E0918U) /**< \brief (UART1) Transmit Next Pointer Register */
#define REG_UART1_TNCR (0x400E091CU) /**< \brief (UART1) Transmit Next Counter Register */
#define REG_UART1_PTCR (0x400E0920U) /**< \brief (UART1) Transfer Control Register */
#define REG_UART1_PTSR (0x400E0924U) /**< \brief (UART1) Transfer Status Register */
#else
#define REG_UART1_CR (*(__O uint32_t*)0x400E0800U) /**< \brief (UART1) Control Register */
#define REG_UART1_MR (*(__IO uint32_t*)0x400E0804U) /**< \brief (UART1) Mode Register */
#define REG_UART1_IER (*(__O uint32_t*)0x400E0808U) /**< \brief (UART1) Interrupt Enable Register */
#define REG_UART1_IDR (*(__O uint32_t*)0x400E080CU) /**< \brief (UART1) Interrupt Disable Register */
#define REG_UART1_IMR (*(__I uint32_t*)0x400E0810U) /**< \brief (UART1) Interrupt Mask Register */
#define REG_UART1_SR (*(__I uint32_t*)0x400E0814U) /**< \brief (UART1) Status Register */
#define REG_UART1_RHR (*(__I uint32_t*)0x400E0818U) /**< \brief (UART1) Receive Holding Register */
#define REG_UART1_THR (*(__O uint32_t*)0x400E081CU) /**< \brief (UART1) Transmit Holding Register */
#define REG_UART1_BRGR (*(__IO uint32_t*)0x400E0820U) /**< \brief (UART1) Baud Rate Generator Register */
#define REG_UART1_RPR (*(__IO uint32_t*)0x400E0900U) /**< \brief (UART1) Receive Pointer Register */
#define REG_UART1_RCR (*(__IO uint32_t*)0x400E0904U) /**< \brief (UART1) Receive Counter Register */
#define REG_UART1_TPR (*(__IO uint32_t*)0x400E0908U) /**< \brief (UART1) Transmit Pointer Register */
#define REG_UART1_TCR (*(__IO uint32_t*)0x400E090CU) /**< \brief (UART1) Transmit Counter Register */
#define REG_UART1_RNPR (*(__IO uint32_t*)0x400E0910U) /**< \brief (UART1) Receive Next Pointer Register */
#define REG_UART1_RNCR (*(__IO uint32_t*)0x400E0914U) /**< \brief (UART1) Receive Next Counter Register */
#define REG_UART1_TNPR (*(__IO uint32_t*)0x400E0918U) /**< \brief (UART1) Transmit Next Pointer Register */
#define REG_UART1_TNCR (*(__IO uint32_t*)0x400E091CU) /**< \brief (UART1) Transmit Next Counter Register */
#define REG_UART1_PTCR (*(__O uint32_t*)0x400E0920U) /**< \brief (UART1) Transfer Control Register */
#define REG_UART1_PTSR (*(__I uint32_t*)0x400E0924U) /**< \brief (UART1) Transfer Status Register */
#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#endif /* _SAM4S_UART1_INSTANCE_ */
|