Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 | /**
******************************************************************************
* @file stm32f0xx_hal_i2c.h
* @author MCD Application Team
* @brief Header file of I2C HAL module.
******************************************************************************
* @attention
*
* <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F0xx_HAL_I2C_H
#define __STM32F0xx_HAL_I2C_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx_hal_def.h"
/** @addtogroup STM32F0xx_HAL_Driver
* @{
*/
/** @addtogroup I2C
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup I2C_Exported_Types I2C Exported Types
* @{
*/
/** @defgroup I2C_Configuration_Structure_definition I2C Configuration Structure definition
* @brief I2C Configuration Structure definition
* @{
*/
typedef struct
{
uint32_t Timing; /*!< Specifies the I2C_TIMINGR_register value.
This parameter calculated by referring to I2C initialization
section in Reference manual */
uint32_t OwnAddress1; /*!< Specifies the first device own address.
This parameter can be a 7-bit or 10-bit address. */
uint32_t AddressingMode; /*!< Specifies if 7-bit or 10-bit addressing mode is selected.
This parameter can be a value of @ref I2C_ADDRESSING_MODE */
uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected.
This parameter can be a value of @ref I2C_DUAL_ADDRESSING_MODE */
uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected
This parameter can be a 7-bit address. */
uint32_t OwnAddress2Masks; /*!< Specifies the acknowledge mask address second device own address if dual addressing mode is selected
This parameter can be a value of @ref I2C_OWN_ADDRESS2_MASKS */
uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected.
This parameter can be a value of @ref I2C_GENERAL_CALL_ADDRESSING_MODE */
uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected.
This parameter can be a value of @ref I2C_NOSTRETCH_MODE */
} I2C_InitTypeDef;
/**
* @}
*/
/** @defgroup HAL_state_structure_definition HAL state structure definition
* @brief HAL State structure definition
* @note HAL I2C State value coding follow below described bitmap :\n
* b7-b6 Error information\n
* 00 : No Error\n
* 01 : Abort (Abort user request on going)\n
* 10 : Timeout\n
* 11 : Error\n
* b5 IP initilisation status\n
* 0 : Reset (IP not initialized)\n
* 1 : Init done (IP initialized and ready to use. HAL I2C Init function called)\n
* b4 (not used)\n
* x : Should be set to 0\n
* b3\n
* 0 : Ready or Busy (No Listen mode ongoing)\n
* 1 : Listen (IP in Address Listen Mode)\n
* b2 Intrinsic process state\n
* 0 : Ready\n
* 1 : Busy (IP busy with some configuration or internal operations)\n
* b1 Rx state\n
* 0 : Ready (no Rx operation ongoing)\n
* 1 : Busy (Rx operation ongoing)\n
* b0 Tx state\n
* 0 : Ready (no Tx operation ongoing)\n
* 1 : Busy (Tx operation ongoing)
* @{
*/
typedef enum
{
HAL_I2C_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized */
HAL_I2C_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use */
HAL_I2C_STATE_BUSY = 0x24U, /*!< An internal process is ongoing */
HAL_I2C_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing */
HAL_I2C_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing */
HAL_I2C_STATE_LISTEN = 0x28U, /*!< Address Listen Mode is ongoing */
HAL_I2C_STATE_BUSY_TX_LISTEN = 0x29U, /*!< Address Listen Mode and Data Transmission
process is ongoing */
HAL_I2C_STATE_BUSY_RX_LISTEN = 0x2AU, /*!< Address Listen Mode and Data Reception
process is ongoing */
HAL_I2C_STATE_ABORT = 0x60U, /*!< Abort user request ongoing */
HAL_I2C_STATE_TIMEOUT = 0xA0U, /*!< Timeout state */
HAL_I2C_STATE_ERROR = 0xE0U /*!< Error */
} HAL_I2C_StateTypeDef;
/**
* @}
*/
/** @defgroup HAL_mode_structure_definition HAL mode structure definition
* @brief HAL Mode structure definition
* @note HAL I2C Mode value coding follow below described bitmap :\n
* b7 (not used)\n
* x : Should be set to 0\n
* b6\n
* 0 : None\n
* 1 : Memory (HAL I2C communication is in Memory Mode)\n
* b5\n
* 0 : None\n
* 1 : Slave (HAL I2C communication is in Slave Mode)\n
* b4\n
* 0 : None\n
* 1 : Master (HAL I2C communication is in Master Mode)\n
* b3-b2-b1-b0 (not used)\n
* xxxx : Should be set to 0000
* @{
*/
typedef enum
{
HAL_I2C_MODE_NONE = 0x00U, /*!< No I2C communication on going */
HAL_I2C_MODE_MASTER = 0x10U, /*!< I2C communication is in Master Mode */
HAL_I2C_MODE_SLAVE = 0x20U, /*!< I2C communication is in Slave Mode */
HAL_I2C_MODE_MEM = 0x40U /*!< I2C communication is in Memory Mode */
} HAL_I2C_ModeTypeDef;
/**
* @}
*/
/** @defgroup I2C_Error_Code_definition I2C Error Code definition
* @brief I2C Error Code definition
* @{
*/
#define HAL_I2C_ERROR_NONE (0x00000000U) /*!< No error */
#define HAL_I2C_ERROR_BERR (0x00000001U) /*!< BERR error */
#define HAL_I2C_ERROR_ARLO (0x00000002U) /*!< ARLO error */
#define HAL_I2C_ERROR_AF (0x00000004U) /*!< ACKF error */
#define HAL_I2C_ERROR_OVR (0x00000008U) /*!< OVR error */
#define HAL_I2C_ERROR_DMA (0x00000010U) /*!< DMA transfer error */
#define HAL_I2C_ERROR_TIMEOUT (0x00000020U) /*!< Timeout error */
#define HAL_I2C_ERROR_SIZE (0x00000040U) /*!< Size Management error */
/**
* @}
*/
/** @defgroup I2C_handle_Structure_definition I2C handle Structure definition
* @brief I2C handle Structure definition
* @{
*/
typedef struct __I2C_HandleTypeDef
{
I2C_TypeDef *Instance; /*!< I2C registers base address */
I2C_InitTypeDef Init; /*!< I2C communication parameters */
uint8_t *pBuffPtr; /*!< Pointer to I2C transfer buffer */
uint16_t XferSize; /*!< I2C transfer size */
__IO uint16_t XferCount; /*!< I2C transfer counter */
__IO uint32_t XferOptions; /*!< I2C sequantial transfer options, this parameter can
be a value of @ref I2C_XFEROPTIONS */
__IO uint32_t PreviousState; /*!< I2C communication Previous state */
HAL_StatusTypeDef(*XferISR)(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources); /*!< I2C transfer IRQ handler function pointer */
DMA_HandleTypeDef *hdmatx; /*!< I2C Tx DMA handle parameters */
DMA_HandleTypeDef *hdmarx; /*!< I2C Rx DMA handle parameters */
HAL_LockTypeDef Lock; /*!< I2C locking object */
__IO HAL_I2C_StateTypeDef State; /*!< I2C communication state */
__IO HAL_I2C_ModeTypeDef Mode; /*!< I2C communication mode */
__IO uint32_t ErrorCode; /*!< I2C Error code */
__IO uint32_t AddrEventCount; /*!< I2C Address Event counter */
} I2C_HandleTypeDef;
/**
* @}
*/
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup I2C_Exported_Constants I2C Exported Constants
* @{
*/
/** @defgroup I2C_XFEROPTIONS I2C Sequential Transfer Options
* @{
*/
#define I2C_FIRST_FRAME ((uint32_t)I2C_SOFTEND_MODE)
#define I2C_FIRST_AND_NEXT_FRAME ((uint32_t)(I2C_RELOAD_MODE | I2C_SOFTEND_MODE))
#define I2C_NEXT_FRAME ((uint32_t)(I2C_RELOAD_MODE | I2C_SOFTEND_MODE))
#define I2C_FIRST_AND_LAST_FRAME ((uint32_t)I2C_AUTOEND_MODE)
#define I2C_LAST_FRAME ((uint32_t)I2C_AUTOEND_MODE)
/**
* @}
*/
/** @defgroup I2C_ADDRESSING_MODE I2C Addressing Mode
* @{
*/
#define I2C_ADDRESSINGMODE_7BIT (0x00000001U)
#define I2C_ADDRESSINGMODE_10BIT (0x00000002U)
/**
* @}
*/
/** @defgroup I2C_DUAL_ADDRESSING_MODE I2C Dual Addressing Mode
* @{
*/
#define I2C_DUALADDRESS_DISABLE (0x00000000U)
#define I2C_DUALADDRESS_ENABLE I2C_OAR2_OA2EN
/**
* @}
*/
/** @defgroup I2C_OWN_ADDRESS2_MASKS I2C Own Address2 Masks
* @{
*/
#define I2C_OA2_NOMASK ((uint8_t)0x00U)
#define I2C_OA2_MASK01 ((uint8_t)0x01U)
#define I2C_OA2_MASK02 ((uint8_t)0x02U)
#define I2C_OA2_MASK03 ((uint8_t)0x03U)
#define I2C_OA2_MASK04 ((uint8_t)0x04U)
#define I2C_OA2_MASK05 ((uint8_t)0x05U)
#define I2C_OA2_MASK06 ((uint8_t)0x06U)
#define I2C_OA2_MASK07 ((uint8_t)0x07U)
/**
* @}
*/
/** @defgroup I2C_GENERAL_CALL_ADDRESSING_MODE I2C General Call Addressing Mode
* @{
*/
#define I2C_GENERALCALL_DISABLE (0x00000000U)
#define I2C_GENERALCALL_ENABLE I2C_CR1_GCEN
/**
* @}
*/
/** @defgroup I2C_NOSTRETCH_MODE I2C No-Stretch Mode
* @{
*/
#define I2C_NOSTRETCH_DISABLE (0x00000000U)
#define I2C_NOSTRETCH_ENABLE I2C_CR1_NOSTRETCH
/**
* @}
*/
/** @defgroup I2C_MEMORY_ADDRESS_SIZE I2C Memory Address Size
* @{
*/
#define I2C_MEMADD_SIZE_8BIT (0x00000001U)
#define I2C_MEMADD_SIZE_16BIT (0x00000002U)
/**
* @}
*/
/** @defgroup I2C_XFERDIRECTION I2C Transfer Direction Master Point of View
* @{
*/
#define I2C_DIRECTION_TRANSMIT (0x00000000U)
#define I2C_DIRECTION_RECEIVE (0x00000001U)
/**
* @}
*/
/** @defgroup I2C_RELOAD_END_MODE I2C Reload End Mode
* @{
*/
#define I2C_RELOAD_MODE I2C_CR2_RELOAD
#define I2C_AUTOEND_MODE I2C_CR2_AUTOEND
#define I2C_SOFTEND_MODE (0x00000000U)
/**
* @}
*/
/** @defgroup I2C_START_STOP_MODE I2C Start or Stop Mode
* @{
*/
#define I2C_NO_STARTSTOP (0x00000000U)
#define I2C_GENERATE_STOP I2C_CR2_STOP
#define I2C_GENERATE_START_READ (uint32_t)(I2C_CR2_START | I2C_CR2_RD_WRN)
#define I2C_GENERATE_START_WRITE I2C_CR2_START
/**
* @}
*/
/** @defgroup I2C_Interrupt_configuration_definition I2C Interrupt configuration definition
* @brief I2C Interrupt definition
* Elements values convention: 0xXXXXXXXX
* - XXXXXXXX : Interrupt control mask
* @{
*/
#define I2C_IT_ERRI I2C_CR1_ERRIE
#define I2C_IT_TCI I2C_CR1_TCIE
#define I2C_IT_STOPI I2C_CR1_STOPIE
#define I2C_IT_NACKI I2C_CR1_NACKIE
#define I2C_IT_ADDRI I2C_CR1_ADDRIE
#define I2C_IT_RXI I2C_CR1_RXIE
#define I2C_IT_TXI I2C_CR1_TXIE
/**
* @}
*/
/** @defgroup I2C_Flag_definition I2C Flag definition
* @{
*/
#define I2C_FLAG_TXE I2C_ISR_TXE
#define I2C_FLAG_TXIS I2C_ISR_TXIS
#define I2C_FLAG_RXNE I2C_ISR_RXNE
#define I2C_FLAG_ADDR I2C_ISR_ADDR
#define I2C_FLAG_AF I2C_ISR_NACKF
#define I2C_FLAG_STOPF I2C_ISR_STOPF
#define I2C_FLAG_TC I2C_ISR_TC
#define I2C_FLAG_TCR I2C_ISR_TCR
#define I2C_FLAG_BERR I2C_ISR_BERR
#define I2C_FLAG_ARLO I2C_ISR_ARLO
#define I2C_FLAG_OVR I2C_ISR_OVR
#define I2C_FLAG_PECERR I2C_ISR_PECERR
#define I2C_FLAG_TIMEOUT I2C_ISR_TIMEOUT
#define I2C_FLAG_ALERT I2C_ISR_ALERT
#define I2C_FLAG_BUSY I2C_ISR_BUSY
#define I2C_FLAG_DIR I2C_ISR_DIR
/**
* @}
*/
/**
* @}
*/
/* Exported macros -----------------------------------------------------------*/
/** @defgroup I2C_Exported_Macros I2C Exported Macros
* @{
*/
/** @brief Reset I2C handle state.
* @param __HANDLE__ specifies the I2C Handle.
* @retval None
*/
#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2C_STATE_RESET)
/** @brief Enable the specified I2C interrupt.
* @param __HANDLE__ specifies the I2C Handle.
* @param __INTERRUPT__ specifies the interrupt source to enable.
* This parameter can be one of the following values:
* @arg @ref I2C_IT_ERRI Errors interrupt enable
* @arg @ref I2C_IT_TCI Transfer complete interrupt enable
* @arg @ref I2C_IT_STOPI STOP detection interrupt enable
* @arg @ref I2C_IT_NACKI NACK received interrupt enable
* @arg @ref I2C_IT_ADDRI Address match interrupt enable
* @arg @ref I2C_IT_RXI RX interrupt enable
* @arg @ref I2C_IT_TXI TX interrupt enable
*
* @retval None
*/
#define __HAL_I2C_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 |= (__INTERRUPT__))
/** @brief Disable the specified I2C interrupt.
* @param __HANDLE__ specifies the I2C Handle.
* @param __INTERRUPT__ specifies the interrupt source to disable.
* This parameter can be one of the following values:
* @arg @ref I2C_IT_ERRI Errors interrupt enable
* @arg @ref I2C_IT_TCI Transfer complete interrupt enable
* @arg @ref I2C_IT_STOPI STOP detection interrupt enable
* @arg @ref I2C_IT_NACKI NACK received interrupt enable
* @arg @ref I2C_IT_ADDRI Address match interrupt enable
* @arg @ref I2C_IT_RXI RX interrupt enable
* @arg @ref I2C_IT_TXI TX interrupt enable
*
* @retval None
*/
#define __HAL_I2C_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 &= (~(__INTERRUPT__)))
/** @brief Check whether the specified I2C interrupt source is enabled or not.
* @param __HANDLE__ specifies the I2C Handle.
* @param __INTERRUPT__ specifies the I2C interrupt source to check.
* This parameter can be one of the following values:
* @arg @ref I2C_IT_ERRI Errors interrupt enable
* @arg @ref I2C_IT_TCI Transfer complete interrupt enable
* @arg @ref I2C_IT_STOPI STOP detection interrupt enable
* @arg @ref I2C_IT_NACKI NACK received interrupt enable
* @arg @ref I2C_IT_ADDRI Address match interrupt enable
* @arg @ref I2C_IT_RXI RX interrupt enable
* @arg @ref I2C_IT_TXI TX interrupt enable
*
* @retval The new state of __INTERRUPT__ (SET or RESET).
*/
#define __HAL_I2C_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR1 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
/** @brief Check whether the specified I2C flag is set or not.
* @param __HANDLE__ specifies the I2C Handle.
* @param __FLAG__ specifies the flag to check.
* This parameter can be one of the following values:
* @arg @ref I2C_FLAG_TXE Transmit data register empty
* @arg @ref I2C_FLAG_TXIS Transmit interrupt status
* @arg @ref I2C_FLAG_RXNE Receive data register not empty
* @arg @ref I2C_FLAG_ADDR Address matched (slave mode)
* @arg @ref I2C_FLAG_AF Acknowledge failure received flag
* @arg @ref I2C_FLAG_STOPF STOP detection flag
* @arg @ref I2C_FLAG_TC Transfer complete (master mode)
* @arg @ref I2C_FLAG_TCR Transfer complete reload
* @arg @ref I2C_FLAG_BERR Bus error
* @arg @ref I2C_FLAG_ARLO Arbitration lost
* @arg @ref I2C_FLAG_OVR Overrun/Underrun
* @arg @ref I2C_FLAG_PECERR PEC error in reception
* @arg @ref I2C_FLAG_TIMEOUT Timeout or Tlow detection flag
* @arg @ref I2C_FLAG_ALERT SMBus alert
* @arg @ref I2C_FLAG_BUSY Bus busy
* @arg @ref I2C_FLAG_DIR Transfer direction (slave mode)
*
* @retval The new state of __FLAG__ (SET or RESET).
*/
#define __HAL_I2C_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) == (__FLAG__)) ? SET : RESET)
/** @brief Clear the I2C pending flags which are cleared by writing 1 in a specific bit.
* @param __HANDLE__ specifies the I2C Handle.
* @param __FLAG__ specifies the flag to clear.
* This parameter can be any combination of the following values:
* @arg @ref I2C_FLAG_TXE Transmit data register empty
* @arg @ref I2C_FLAG_ADDR Address matched (slave mode)
* @arg @ref I2C_FLAG_AF Acknowledge failure received flag
* @arg @ref I2C_FLAG_STOPF STOP detection flag
* @arg @ref I2C_FLAG_BERR Bus error
* @arg @ref I2C_FLAG_ARLO Arbitration lost
* @arg @ref I2C_FLAG_OVR Overrun/Underrun
* @arg @ref I2C_FLAG_PECERR PEC error in reception
* @arg @ref I2C_FLAG_TIMEOUT Timeout or Tlow detection flag
* @arg @ref I2C_FLAG_ALERT SMBus alert
*
* @retval None
*/
#define __HAL_I2C_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__FLAG__) == I2C_FLAG_TXE) ? ((__HANDLE__)->Instance->ISR |= (__FLAG__)) \
: ((__HANDLE__)->Instance->ICR = (__FLAG__)))
/** @brief Enable the specified I2C peripheral.
* @param __HANDLE__ specifies the I2C Handle.
* @retval None
*/
#define __HAL_I2C_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE))
/** @brief Disable the specified I2C peripheral.
* @param __HANDLE__ specifies the I2C Handle.
* @retval None
*/
#define __HAL_I2C_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE))
/** @brief Generate a Non-Acknowledge I2C peripheral in Slave mode.
* @param __HANDLE__ specifies the I2C Handle.
* @retval None
*/
#define __HAL_I2C_GENERATE_NACK(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR2, I2C_CR2_NACK))
/**
* @}
*/
/* Include I2C HAL Extended module */
#include "stm32f0xx_hal_i2c_ex.h"
/* Exported functions --------------------------------------------------------*/
/** @addtogroup I2C_Exported_Functions
* @{
*/
/** @addtogroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions
* @{
*/
/* Initialization and de-initialization functions******************************/
HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c);
HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c);
void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c);
void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c);
/**
* @}
*/
/** @addtogroup I2C_Exported_Functions_Group2 Input and Output operation functions
* @{
*/
/* IO operation functions ****************************************************/
/******* Blocking mode: Polling */
HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);
HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);
HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout);
/******* Non-Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_I2C_Master_Sequential_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
HAL_StatusTypeDef HAL_I2C_Master_Sequential_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
HAL_StatusTypeDef HAL_I2C_Slave_Sequential_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
HAL_StatusTypeDef HAL_I2C_Slave_Sequential_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c);
HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c);
HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress);
/******* Non-Blocking mode: DMA */
HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
/**
* @}
*/
/** @addtogroup I2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks
* @{
*/
/******* I2C IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */
void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c);
void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c);
void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c);
void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c);
void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c);
void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c);
void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode);
void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c);
void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c);
void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c);
void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c);
void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c);
/**
* @}
*/
/** @addtogroup I2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions
* @{
*/
/* Peripheral State, Mode and Error functions *********************************/
HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c);
HAL_I2C_ModeTypeDef HAL_I2C_GetMode(I2C_HandleTypeDef *hi2c);
uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c);
/**
* @}
*/
/**
* @}
*/
/* Private constants ---------------------------------------------------------*/
/** @defgroup I2C_Private_Constants I2C Private Constants
* @{
*/
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup I2C_Private_Macro I2C Private Macros
* @{
*/
#define IS_I2C_ADDRESSING_MODE(MODE) (((MODE) == I2C_ADDRESSINGMODE_7BIT) || \
((MODE) == I2C_ADDRESSINGMODE_10BIT))
#define IS_I2C_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == I2C_DUALADDRESS_DISABLE) || \
((ADDRESS) == I2C_DUALADDRESS_ENABLE))
#define IS_I2C_OWN_ADDRESS2_MASK(MASK) (((MASK) == I2C_OA2_NOMASK) || \
((MASK) == I2C_OA2_MASK01) || \
((MASK) == I2C_OA2_MASK02) || \
((MASK) == I2C_OA2_MASK03) || \
((MASK) == I2C_OA2_MASK04) || \
((MASK) == I2C_OA2_MASK05) || \
((MASK) == I2C_OA2_MASK06) || \
((MASK) == I2C_OA2_MASK07))
#define IS_I2C_GENERAL_CALL(CALL) (((CALL) == I2C_GENERALCALL_DISABLE) || \
((CALL) == I2C_GENERALCALL_ENABLE))
#define IS_I2C_NO_STRETCH(STRETCH) (((STRETCH) == I2C_NOSTRETCH_DISABLE) || \
((STRETCH) == I2C_NOSTRETCH_ENABLE))
#define IS_I2C_MEMADD_SIZE(SIZE) (((SIZE) == I2C_MEMADD_SIZE_8BIT) || \
((SIZE) == I2C_MEMADD_SIZE_16BIT))
#define IS_TRANSFER_MODE(MODE) (((MODE) == I2C_RELOAD_MODE) || \
((MODE) == I2C_AUTOEND_MODE) || \
((MODE) == I2C_SOFTEND_MODE))
#define IS_TRANSFER_REQUEST(REQUEST) (((REQUEST) == I2C_GENERATE_STOP) || \
((REQUEST) == I2C_GENERATE_START_READ) || \
((REQUEST) == I2C_GENERATE_START_WRITE) || \
((REQUEST) == I2C_NO_STARTSTOP))
#define IS_I2C_TRANSFER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_FIRST_FRAME) || \
((REQUEST) == I2C_FIRST_AND_NEXT_FRAME) || \
((REQUEST) == I2C_NEXT_FRAME) || \
((REQUEST) == I2C_FIRST_AND_LAST_FRAME) || \
((REQUEST) == I2C_LAST_FRAME))
#define I2C_RESET_CR2(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_HEAD10R | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_RD_WRN)))
#define I2C_GET_ADDR_MATCH(__HANDLE__) (((__HANDLE__)->Instance->ISR & I2C_ISR_ADDCODE) >> 16U)
#define I2C_GET_DIR(__HANDLE__) (((__HANDLE__)->Instance->ISR & I2C_ISR_DIR) >> 16U)
#define I2C_GET_STOP_MODE(__HANDLE__) ((__HANDLE__)->Instance->CR2 & I2C_CR2_AUTOEND)
#define I2C_GET_OWN_ADDRESS1(__HANDLE__) ((__HANDLE__)->Instance->OAR1 & I2C_OAR1_OA1)
#define I2C_GET_OWN_ADDRESS2(__HANDLE__) ((__HANDLE__)->Instance->OAR2 & I2C_OAR2_OA2)
#define IS_I2C_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= 0x000003FFU)
#define IS_I2C_OWN_ADDRESS2(ADDRESS2) ((ADDRESS2) <= (uint16_t)0x00FFU)
#define I2C_MEM_ADD_MSB(__ADDRESS__) ((uint8_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0xFF00U))) >> 8U)))
#define I2C_MEM_ADD_LSB(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FFU))))
#define I2C_GENERATE_START(__ADDMODE__,__ADDRESS__) (((__ADDMODE__) == I2C_ADDRESSINGMODE_7BIT) ? (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_START) | (I2C_CR2_AUTOEND)) & (~I2C_CR2_RD_WRN)) : \
(uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_ADD10) | (I2C_CR2_START)) & (~I2C_CR2_RD_WRN)))
/**
* @}
*/
/* Private Functions ---------------------------------------------------------*/
/** @defgroup I2C_Private_Functions I2C Private Functions
* @{
*/
/* Private functions are defined in stm32f0xx_hal_i2c.c file */
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F0xx_HAL_I2C_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|