Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 | /* * Copyright (c) 2018 Phytec Messtechnik GmbH * Copyright (c) 2017 Linaro Limited * * SPDX-License-Identifier: Apache-2.0 */ /dts-v1/; #include <nordic/nrf52840.dtsi> / { model = "reel board"; compatible = "nordic,pca10056-dk", "nordic,nrf52840-qiaa", "nordic,nrf52840"; chosen { zephyr,console = &uart0; #ifdef CONFIG_MCUMGR_SMP_UART zephyr,uart-mcumgr = &uart0; #endif zephyr,sram = &sram0; zephyr,flash = &flash0; }; leds { compatible = "gpio-leds"; yellow_led: led@0 { gpios = <&gpio0 13 0>; label = "User D13"; }; red_led: led@1 { gpios = <&gpio0 11 0>; label = "User D3 red"; }; green_led: led@2 { gpios = <&gpio0 12 0>; label = "User D3 green"; }; blue_led: led@3 { gpios = <&gpio1 9 0>; label = "User D3 blue"; }; }; gpio_keys { compatible = "gpio-keys"; user_button: button@0 { gpios = <&gpio0 7 GPIO_PUD_PULL_UP>; label = "User Button"; }; }; aliases { led0 = &yellow_led; led1 = &red_led; led2 = &green_led; led3 = &blue_led; sw0 = &user_button; }; }; &gpiote { status ="ok"; }; &gpio0 { status ="ok"; }; &gpio1 { status ="ok"; }; &uart0 { compatible = "nordic,nrf-uart"; current-speed = <115200>; status = "ok"; }; &i2c0 { status = "ok"; clock-frequency = <I2C_BITRATE_FAST>; sda-pin = <26>; scl-pin = <27>; fxos8700@1d { compatible = "nxp,fxos8700"; reg = <0x1d>; label = "FXOS8700"; int1-gpios = <&gpio0 24 0>; }; hdc1008@43 { compatible = "ti,hdc1008"; reg = <0x43>; label = "HDC1008"; drdy-gpios = <&gpio0 22 GPIO_PUD_PULL_UP>; }; apds9960@29 { compatible = "avago,apds9960"; reg = <0x29>; label = "APDS9960"; int-gpios = <&gpio0 23 0>; }; }; &flash0 { /* * For more information, see: * http://docs.zephyrproject.org/devices/dts/flash_partitions.html */ partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; boot_partition: partition@0 { label = "mcuboot"; reg = <0x000000000 0x0000C000>; }; slot0_partition: partition@c000 { label = "image-0"; reg = <0x0000C000 0x000069000>; }; slot1_partition: partition@75000 { label = "image-1"; reg = <0x00075000 0x000069000>; }; scratch_partition: partition@de000 { label = "image-scratch"; reg = <0x000de000 0x0001e000>; }; #if defined(CONFIG_FS_FLASH_STORAGE_PARTITION) storage_partition: partition@fc000 { label = "storage"; reg = <0x000fc000 0x00004000>; }; #endif }; }; &usbd { compatible = "nordic,nrf-usbd"; status = "ok"; }; |