Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 | /*
* Copyright (c) 2017 Linaro Limited
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <st/stm32l4.dtsi>
/ {
soc {
pinctrl: pin-controller@48000000 {
gpiod: gpio@48000c00 {
compatible = "st,stm32-gpio";
gpio-controller;
#gpio-cells = <2>;
reg = <0x48000c00 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_AHB2 0x00000008>;
label = "GPIOD";
};
gpioe: gpio@48001000 {
compatible = "st,stm32-gpio";
gpio-controller;
#gpio-cells = <2>;
reg = <0x48001000 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_AHB2 0x00000010>;
label = "GPIOE";
};
gpiof: gpio@48001400 {
compatible = "st,stm32-gpio";
gpio-controller;
#gpio-cells = <2>;
reg = <0x48001400 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_AHB2 0x00000020>;
label = "GPIOF";
};
gpiog: gpio@48001800 {
compatible = "st,stm32-gpio";
gpio-controller;
#gpio-cells = <2>;
reg = <0x48001800 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_AHB2 0x00000040>;
label = "GPIOG";
};
};
uart4: serial@40004c00 {
compatible = "st,stm32-uart";
reg = <0x40004c00 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00080000>;
interrupts = <52 0>;
status = "disabled";
label = "UART_4";
};
uart5: serial@40005000 {
compatible = "st,stm32-uart";
reg = <0x40005000 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00100000>;
interrupts = <53 0>;
status = "disabled";
label = "UART_5";
};
i2c2: i2c@40005800 {
compatible = "st,stm32-i2c-v2";
clock-frequency = <I2C_BITRATE_STANDARD>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x40005800 0x400>;
interrupts = <33 0>, <34 0>;
interrupt-names = "event", "error";
status = "disabled";
label= "I2C_2";
};
i2c3: i2c@40005C00 {
compatible = "st,stm32-i2c-v2";
clock-frequency = <I2C_BITRATE_STANDARD>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x40005C00 0x400>;
interrupts = <72 0>, <73 0>;
interrupt-names = "event", "error";
status = "disabled";
label= "I2C_3";
};
spi3: spi@40003C00 {
compatible = "st,stm32-spi-fifo";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x40003C00 0x400>;
interrupts = <51 5>;
status = "disabled";
label = "SPI_3";
};
usbotg_fs: otgfs@50000000 {
compatible = "st,stm32-otgfs";
reg = <0x50000000 0x40000>;
interrupts = <67 0>;
interrupt-names = "otgfs";
num-bidir-endpoints = <1>;
num-in-endpoints = <5>;
num-out-endpoints = <5>;
ram-size = <1280>;
status = "disabled";
label= "OTGFS";
};
};
};
|