Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 | // SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
* Device Tree file for the Linksys WRT3200ACM (Rango)
*
* Copyright (C) 2016 Imre Kaloz <kaloz@openwrt.org>
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "armada-385-linksys.dtsi"
/ {
model = "Linksys WRT3200ACM";
compatible = "linksys,rango", "linksys,armada385", "marvell,armada385",
"marvell,armada380";
};
&expander0 {
wan_amber@0 {
label = "rango:amber:wan";
reg = <0x0>;
};
wan_white@1 {
label = "rango:white:wan";
reg = <0x1>;
};
usb2@5 {
label = "rango:white:usb2";
reg = <0x5>;
};
usb3_1@6 {
label = "rango:white:usb3_1";
reg = <0x6>;
};
usb3_2@7 {
label = "rango:white:usb3_2";
reg = <0x7>;
};
wps_white@8 {
label = "rango:white:wps";
reg = <0x8>;
};
wps_amber@9 {
label = "rango:amber:wps";
reg = <0x9>;
};
};
&gpio_leds {
power {
gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
label = "rango:white:power";
};
sata {
gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
label = "rango:white:sata";
};
wlan_2g {
gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
label = "rango:white:wlan_2g";
};
wlan_5g {
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
label = "rango:white:wlan_5g";
};
};
&gpio_leds_pins {
marvell,pins = "mpp21", "mpp45", "mpp46", "mpp56";
};
&nand {
/* AMD/Spansion S34ML02G2 256MiB, OEM Layout */
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0000000 0x200000>; /* 2MiB */
read-only;
};
partition@200000 {
label = "u_env";
reg = <0x200000 0x20000>; /* 128KiB */
};
partition@220000 {
label = "s_env";
reg = <0x220000 0x40000>; /* 256KiB */
};
partition@7e0000 {
label = "devinfo";
reg = <0x7e0000 0x40000>; /* 256KiB */
read-only;
};
partition@820000 {
label = "sysdiag";
reg = <0x820000 0x1e0000>; /* 1920KiB */
read-only;
};
/* kernel1 overlaps with rootfs1 by design */
partition@a00000 {
label = "kernel1";
reg = <0xa00000 0x5000000>; /* 80MiB */
};
partition@1000000 {
label = "rootfs1";
reg = <0x1000000 0x4a00000>; /* 74MiB */
};
/* kernel2 overlaps with rootfs2 by design */
partition@5a00000 {
label = "kernel2";
reg = <0x5a00000 0x5000000>; /* 80MiB */
};
partition@6000000 {
label = "rootfs2";
reg = <0x6000000 0x4a00000>; /* 74MiB */
};
/*
* 86MiB, last MiB is for the BBT, not writable
*/
partition@aa00000 {
label = "syscfg";
reg = <0xaa00000 0x5600000>;
};
/*
* Unused area between "s_env" and "devinfo".
* Moved here because otherwise the renumbered
* partitions would break the bootloader
* supplied bootargs
*/
partition@180000 {
label = "unused_area";
reg = <0x260000 0x5c0000>; /* 5.75MiB */
};
};
};
&sdhci {
pinctrl-names = "default";
pinctrl-0 = <&sdhci_pins>;
no-1-8-v;
non-removable;
wp-inverted;
bus-width = <8>;
status = "okay";
};
&usb3_1_vbus {
gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
};
&usb3_1_vbus_pins {
marvell,pins = "mpp44";
};
|