Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 | /*********************************************************************
*
* Filename: act200l.c
* Version: 0.8
* Description: Implementation for the ACTiSYS ACT-IR200L dongle
* Status: Experimental.
* Author: SHIMIZU Takuya <tshimizu@ga2.so-net.ne.jp>
* Created at: Fri Aug 3 17:35:42 2001
* Modified at: Fri Aug 17 10:22:40 2001
* Modified by: SHIMIZU Takuya <tshimizu@ga2.so-net.ne.jp>
*
* Copyright (c) 2001 SHIMIZU Takuya, All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
********************************************************************/
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <net/irda/irda.h>
#include "sir-dev.h"
static int act200l_reset(struct sir_dev *dev);
static int act200l_open(struct sir_dev *dev);
static int act200l_close(struct sir_dev *dev);
static int act200l_change_speed(struct sir_dev *dev, unsigned speed);
/* Regsiter 0: Control register #1 */
#define ACT200L_REG0 0x00
#define ACT200L_TXEN 0x01 /* Enable transmitter */
#define ACT200L_RXEN 0x02 /* Enable receiver */
/* Register 1: Control register #2 */
#define ACT200L_REG1 0x10
#define ACT200L_LODB 0x01 /* Load new baud rate count value */
#define ACT200L_WIDE 0x04 /* Expand the maximum allowable pulse */
/* Register 4: Output Power register */
#define ACT200L_REG4 0x40
#define ACT200L_OP0 0x01 /* Enable LED1C output */
#define ACT200L_OP1 0x02 /* Enable LED2C output */
#define ACT200L_BLKR 0x04
/* Register 5: Receive Mode register */
#define ACT200L_REG5 0x50
#define ACT200L_RWIDL 0x01 /* fixed 1.6us pulse mode */
/* Register 6: Receive Sensitivity register #1 */
#define ACT200L_REG6 0x60
#define ACT200L_RS0 0x01 /* receive threshold bit 0 */
#define ACT200L_RS1 0x02 /* receive threshold bit 1 */
/* Register 7: Receive Sensitivity register #2 */
#define ACT200L_REG7 0x70
#define ACT200L_ENPOS 0x04 /* Ignore the falling edge */
/* Register 8,9: Baud Rate Dvider register #1,#2 */
#define ACT200L_REG8 0x80
#define ACT200L_REG9 0x90
#define ACT200L_2400 0x5f
#define ACT200L_9600 0x17
#define ACT200L_19200 0x0b
#define ACT200L_38400 0x05
#define ACT200L_57600 0x03
#define ACT200L_115200 0x01
/* Register 13: Control register #3 */
#define ACT200L_REG13 0xd0
#define ACT200L_SHDW 0x01 /* Enable access to shadow registers */
/* Register 15: Status register */
#define ACT200L_REG15 0xf0
/* Register 21: Control register #4 */
#define ACT200L_REG21 0x50
#define ACT200L_EXCK 0x02 /* Disable clock output driver */
#define ACT200L_OSCL 0x04 /* oscillator in low power, medium accuracy mode */
static struct dongle_driver act200l = {
.owner = THIS_MODULE,
.driver_name = "ACTiSYS ACT-IR200L",
.type = IRDA_ACT200L_DONGLE,
.open = act200l_open,
.close = act200l_close,
.reset = act200l_reset,
.set_speed = act200l_change_speed,
};
static int __init act200l_sir_init(void)
{
return irda_register_dongle(&act200l);
}
static void __exit act200l_sir_cleanup(void)
{
irda_unregister_dongle(&act200l);
}
static int act200l_open(struct sir_dev *dev)
{
struct qos_info *qos = &dev->qos;
/* Power on the dongle */
sirdev_set_dtr_rts(dev, TRUE, TRUE);
/* Set the speeds we can accept */
qos->baud_rate.bits &= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200;
qos->min_turn_time.bits = 0x03;
irda_qos_bits_to_value(qos);
/* irda thread waits 50 msec for power settling */
return 0;
}
static int act200l_close(struct sir_dev *dev)
{
/* Power off the dongle */
sirdev_set_dtr_rts(dev, FALSE, FALSE);
return 0;
}
/*
* Function act200l_change_speed (dev, speed)
*
* Set the speed for the ACTiSYS ACT-IR200L type dongle.
*
*/
static int act200l_change_speed(struct sir_dev *dev, unsigned speed)
{
u8 control[3];
int ret = 0;
/* Clear DTR and set RTS to enter command mode */
sirdev_set_dtr_rts(dev, FALSE, TRUE);
switch (speed) {
default:
ret = -EINVAL;
/* fall through */
case 9600:
control[0] = ACT200L_REG8 | (ACT200L_9600 & 0x0f);
control[1] = ACT200L_REG9 | ((ACT200L_9600 >> 4) & 0x0f);
break;
case 19200:
control[0] = ACT200L_REG8 | (ACT200L_19200 & 0x0f);
control[1] = ACT200L_REG9 | ((ACT200L_19200 >> 4) & 0x0f);
break;
case 38400:
control[0] = ACT200L_REG8 | (ACT200L_38400 & 0x0f);
control[1] = ACT200L_REG9 | ((ACT200L_38400 >> 4) & 0x0f);
break;
case 57600:
control[0] = ACT200L_REG8 | (ACT200L_57600 & 0x0f);
control[1] = ACT200L_REG9 | ((ACT200L_57600 >> 4) & 0x0f);
break;
case 115200:
control[0] = ACT200L_REG8 | (ACT200L_115200 & 0x0f);
control[1] = ACT200L_REG9 | ((ACT200L_115200 >> 4) & 0x0f);
break;
}
control[2] = ACT200L_REG1 | ACT200L_LODB | ACT200L_WIDE;
/* Write control bytes */
sirdev_raw_write(dev, control, 3);
msleep(5);
/* Go back to normal mode */
sirdev_set_dtr_rts(dev, TRUE, TRUE);
dev->speed = speed;
return ret;
}
/*
* Function act200l_reset (driver)
*
* Reset the ACTiSYS ACT-IR200L type dongle.
*/
#define ACT200L_STATE_WAIT1_RESET (SIRDEV_STATE_DONGLE_RESET+1)
#define ACT200L_STATE_WAIT2_RESET (SIRDEV_STATE_DONGLE_RESET+2)
static int act200l_reset(struct sir_dev *dev)
{
unsigned state = dev->fsm.substate;
unsigned delay = 0;
static const u8 control[9] = {
ACT200L_REG15,
ACT200L_REG13 | ACT200L_SHDW,
ACT200L_REG21 | ACT200L_EXCK | ACT200L_OSCL,
ACT200L_REG13,
ACT200L_REG7 | ACT200L_ENPOS,
ACT200L_REG6 | ACT200L_RS0 | ACT200L_RS1,
ACT200L_REG5 | ACT200L_RWIDL,
ACT200L_REG4 | ACT200L_OP0 | ACT200L_OP1 | ACT200L_BLKR,
ACT200L_REG0 | ACT200L_TXEN | ACT200L_RXEN
};
int ret = 0;
switch (state) {
case SIRDEV_STATE_DONGLE_RESET:
/* Reset the dongle : set RTS low for 25 ms */
sirdev_set_dtr_rts(dev, TRUE, FALSE);
state = ACT200L_STATE_WAIT1_RESET;
delay = 50;
break;
case ACT200L_STATE_WAIT1_RESET:
/* Clear DTR and set RTS to enter command mode */
sirdev_set_dtr_rts(dev, FALSE, TRUE);
udelay(25); /* better wait for some short while */
/* Write control bytes */
sirdev_raw_write(dev, control, sizeof(control));
state = ACT200L_STATE_WAIT2_RESET;
delay = 15;
break;
case ACT200L_STATE_WAIT2_RESET:
/* Go back to normal mode */
sirdev_set_dtr_rts(dev, TRUE, TRUE);
dev->speed = 9600;
break;
default:
net_err_ratelimited("%s(), unknown state %d\n",
__func__, state);
ret = -1;
break;
}
dev->fsm.substate = state;
return (delay > 0) ? delay : ret;
}
MODULE_AUTHOR("SHIMIZU Takuya <tshimizu@ga2.so-net.ne.jp>");
MODULE_DESCRIPTION("ACTiSYS ACT-IR200L dongle driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("irda-dongle-10"); /* IRDA_ACT200L_DONGLE */
module_init(act200l_sir_init);
module_exit(act200l_sir_cleanup);
|