Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 | /*
* comedi/drivers/pcl730.c
* Driver for Advantech PCL-730 and clones
* José Luis Sánchez
*/
/*
* Driver: pcl730
* Description: Advantech PCL-730 (& compatibles)
* Devices: [Advantech] PCL-730 (pcl730), PCM-3730 (pcm3730), PCL-725 (pcl725),
* PCL-733 (pcl733), PCL-734 (pcl734),
* [ADLink] ACL-7130 (acl7130), ACL-7225b (acl7225b),
* [ICP] ISO-730 (iso730), P8R8-DIO (p8r8dio), P16R16-DIO (p16r16dio),
* [Diamond Systems] OPMM-1616-XT (opmm-1616-xt), PEARL-MM-P (pearl-mm-p),
* IR104-PBF (ir104-pbf),
* Author: José Luis Sánchez (jsanchezv@teleline.es)
* Status: untested
*
* Configuration options:
* [0] - I/O port base
*
* Interrupts are not supported.
* The ACL-7130 card has an 8254 timer/counter not supported by this driver.
*/
#include <linux/module.h>
#include "../comedidev.h"
/*
* Register map
*
* The register map varies slightly depending on the board type but
* all registers are 8-bit.
*
* The boardinfo 'io_range' is used to allow comedi to request the
* proper range required by the board.
*
* The comedi_subdevice 'private' data is used to pass the register
* offset to the (*insn_bits) functions to read/write the correct
* registers.
*
* The basic register mapping looks like this:
*
* BASE+0 Isolated outputs 0-7 (write) / inputs 0-7 (read)
* BASE+1 Isolated outputs 8-15 (write) / inputs 8-15 (read)
* BASE+2 TTL outputs 0-7 (write) / inputs 0-7 (read)
* BASE+3 TTL outputs 8-15 (write) / inputs 8-15 (read)
*
* The pcm3730 board does not have register BASE+1.
*
* The pcl725 and p8r8dio only have registers BASE+0 and BASE+1:
*
* BASE+0 Isolated outputs 0-7 (write) (read back on p8r8dio)
* BASE+1 Isolated inputs 0-7 (read)
*
* The acl7225b and p16r16dio boards have this register mapping:
*
* BASE+0 Isolated outputs 0-7 (write) (read back)
* BASE+1 Isolated outputs 8-15 (write) (read back)
* BASE+2 Isolated inputs 0-7 (read)
* BASE+3 Isolated inputs 8-15 (read)
*
* The pcl733 and pcl733 boards have this register mapping:
*
* BASE+0 Isolated outputs 0-7 (write) or inputs 0-7 (read)
* BASE+1 Isolated outputs 8-15 (write) or inputs 8-15 (read)
* BASE+2 Isolated outputs 16-23 (write) or inputs 16-23 (read)
* BASE+3 Isolated outputs 24-31 (write) or inputs 24-31 (read)
*
* The opmm-1616-xt board has this register mapping:
*
* BASE+0 Isolated outputs 0-7 (write) (read back)
* BASE+1 Isolated outputs 8-15 (write) (read back)
* BASE+2 Isolated inputs 0-7 (read)
* BASE+3 Isolated inputs 8-15 (read)
*
* These registers are not currently supported:
*
* BASE+2 Relay select register (write)
* BASE+3 Board reset control register (write)
* BASE+4 Interrupt control register (write)
* BASE+4 Change detect 7-0 status register (read)
* BASE+5 LED control register (write)
* BASE+5 Change detect 15-8 status register (read)
*
* The pearl-mm-p board has this register mapping:
*
* BASE+0 Isolated outputs 0-7 (write)
* BASE+1 Isolated outputs 8-15 (write)
*
* The ir104-pbf board has this register mapping:
*
* BASE+0 Isolated outputs 0-7 (write) (read back)
* BASE+1 Isolated outputs 8-15 (write) (read back)
* BASE+2 Isolated outputs 16-19 (write) (read back)
* BASE+4 Isolated inputs 0-7 (read)
* BASE+5 Isolated inputs 8-15 (read)
* BASE+6 Isolated inputs 16-19 (read)
*/
struct pcl730_board {
const char *name;
unsigned int io_range;
unsigned is_pcl725:1;
unsigned is_acl7225b:1;
unsigned is_ir104:1;
unsigned has_readback:1;
unsigned has_ttl_io:1;
int n_subdevs;
int n_iso_out_chan;
int n_iso_in_chan;
int n_ttl_chan;
};
static const struct pcl730_board pcl730_boards[] = {
{
.name = "pcl730",
.io_range = 0x04,
.has_ttl_io = 1,
.n_subdevs = 4,
.n_iso_out_chan = 16,
.n_iso_in_chan = 16,
.n_ttl_chan = 16,
}, {
.name = "iso730",
.io_range = 0x04,
.n_subdevs = 4,
.n_iso_out_chan = 16,
.n_iso_in_chan = 16,
.n_ttl_chan = 16,
}, {
.name = "acl7130",
.io_range = 0x08,
.has_ttl_io = 1,
.n_subdevs = 4,
.n_iso_out_chan = 16,
.n_iso_in_chan = 16,
.n_ttl_chan = 16,
}, {
.name = "pcm3730",
.io_range = 0x04,
.has_ttl_io = 1,
.n_subdevs = 4,
.n_iso_out_chan = 8,
.n_iso_in_chan = 8,
.n_ttl_chan = 16,
}, {
.name = "pcl725",
.io_range = 0x02,
.is_pcl725 = 1,
.n_subdevs = 2,
.n_iso_out_chan = 8,
.n_iso_in_chan = 8,
}, {
.name = "p8r8dio",
.io_range = 0x02,
.is_pcl725 = 1,
.has_readback = 1,
.n_subdevs = 2,
.n_iso_out_chan = 8,
.n_iso_in_chan = 8,
}, {
.name = "acl7225b",
.io_range = 0x08, /* only 4 are used */
.is_acl7225b = 1,
.has_readback = 1,
.n_subdevs = 2,
.n_iso_out_chan = 16,
.n_iso_in_chan = 16,
}, {
.name = "p16r16dio",
.io_range = 0x04,
.is_acl7225b = 1,
.has_readback = 1,
.n_subdevs = 2,
.n_iso_out_chan = 16,
.n_iso_in_chan = 16,
}, {
.name = "pcl733",
.io_range = 0x04,
.n_subdevs = 1,
.n_iso_in_chan = 32,
}, {
.name = "pcl734",
.io_range = 0x04,
.n_subdevs = 1,
.n_iso_out_chan = 32,
}, {
.name = "opmm-1616-xt",
.io_range = 0x10,
.is_acl7225b = 1,
.has_readback = 1,
.n_subdevs = 2,
.n_iso_out_chan = 16,
.n_iso_in_chan = 16,
}, {
.name = "pearl-mm-p",
.io_range = 0x02,
.n_subdevs = 1,
.n_iso_out_chan = 16,
}, {
.name = "ir104-pbf",
.io_range = 0x08,
.is_ir104 = 1,
.has_readback = 1,
.n_iso_out_chan = 20,
.n_iso_in_chan = 20,
},
};
static int pcl730_do_insn_bits(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data)
{
unsigned long reg = (unsigned long)s->private;
unsigned int mask;
mask = comedi_dio_update_state(s, data);
if (mask) {
if (mask & 0x00ff)
outb(s->state & 0xff, dev->iobase + reg);
if ((mask & 0xff00) && (s->n_chan > 8))
outb((s->state >> 8) & 0xff, dev->iobase + reg + 1);
if ((mask & 0xff0000) && (s->n_chan > 16))
outb((s->state >> 16) & 0xff, dev->iobase + reg + 2);
if ((mask & 0xff000000) && (s->n_chan > 24))
outb((s->state >> 24) & 0xff, dev->iobase + reg + 3);
}
data[1] = s->state;
return insn->n;
}
static unsigned int pcl730_get_bits(struct comedi_device *dev,
struct comedi_subdevice *s)
{
unsigned long reg = (unsigned long)s->private;
unsigned int val;
val = inb(dev->iobase + reg);
if (s->n_chan > 8)
val |= (inb(dev->iobase + reg + 1) << 8);
if (s->n_chan > 16)
val |= (inb(dev->iobase + reg + 2) << 16);
if (s->n_chan > 24)
val |= (inb(dev->iobase + reg + 3) << 24);
return val;
}
static int pcl730_di_insn_bits(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data)
{
data[1] = pcl730_get_bits(dev, s);
return insn->n;
}
static int pcl730_attach(struct comedi_device *dev,
struct comedi_devconfig *it)
{
const struct pcl730_board *board = dev->board_ptr;
struct comedi_subdevice *s;
int subdev;
int ret;
ret = comedi_request_region(dev, it->options[0], board->io_range);
if (ret)
return ret;
ret = comedi_alloc_subdevices(dev, board->n_subdevs);
if (ret)
return ret;
subdev = 0;
if (board->n_iso_out_chan) {
/* Isolated Digital Outputs */
s = &dev->subdevices[subdev++];
s->type = COMEDI_SUBD_DO;
s->subdev_flags = SDF_WRITABLE;
s->n_chan = board->n_iso_out_chan;
s->maxdata = 1;
s->range_table = &range_digital;
s->insn_bits = pcl730_do_insn_bits;
s->private = (void *)0;
/* get the initial state if supported */
if (board->has_readback)
s->state = pcl730_get_bits(dev, s);
}
if (board->n_iso_in_chan) {
/* Isolated Digital Inputs */
s = &dev->subdevices[subdev++];
s->type = COMEDI_SUBD_DI;
s->subdev_flags = SDF_READABLE;
s->n_chan = board->n_iso_in_chan;
s->maxdata = 1;
s->range_table = &range_digital;
s->insn_bits = pcl730_di_insn_bits;
s->private = board->is_ir104 ? (void *)4 :
board->is_acl7225b ? (void *)2 :
board->is_pcl725 ? (void *)1 : (void *)0;
}
if (board->has_ttl_io) {
/* TTL Digital Outputs */
s = &dev->subdevices[subdev++];
s->type = COMEDI_SUBD_DO;
s->subdev_flags = SDF_WRITABLE;
s->n_chan = board->n_ttl_chan;
s->maxdata = 1;
s->range_table = &range_digital;
s->insn_bits = pcl730_do_insn_bits;
s->private = (void *)2;
/* TTL Digital Inputs */
s = &dev->subdevices[subdev++];
s->type = COMEDI_SUBD_DI;
s->subdev_flags = SDF_READABLE;
s->n_chan = board->n_ttl_chan;
s->maxdata = 1;
s->range_table = &range_digital;
s->insn_bits = pcl730_di_insn_bits;
s->private = (void *)2;
}
return 0;
}
static struct comedi_driver pcl730_driver = {
.driver_name = "pcl730",
.module = THIS_MODULE,
.attach = pcl730_attach,
.detach = comedi_legacy_detach,
.board_name = &pcl730_boards[0].name,
.num_names = ARRAY_SIZE(pcl730_boards),
.offset = sizeof(struct pcl730_board),
};
module_comedi_driver(pcl730_driver);
MODULE_AUTHOR("Comedi http://www.comedi.org");
MODULE_DESCRIPTION("Comedi low-level driver");
MODULE_LICENSE("GPL");
|