Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 | /*
* MS5611 pressure and temperature sensor driver
*
* Copyright (c) Tomasz Duszynski <tduszyns@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Data sheet:
* http://www.meas-spec.com/downloads/MS5611-01BA03.pdf
* http://www.meas-spec.com/downloads/MS5607-02BA03.pdf
*
*/
#include <linux/module.h>
#include <linux/iio/iio.h>
#include <linux/delay.h>
#include <linux/regulator/consumer.h>
#include <linux/iio/buffer.h>
#include <linux/iio/triggered_buffer.h>
#include <linux/iio/trigger_consumer.h>
#include "ms5611.h"
static bool ms5611_prom_is_valid(u16 *prom, size_t len)
{
int i, j;
uint16_t crc = 0, crc_orig = prom[7] & 0x000F;
prom[7] &= 0xFF00;
for (i = 0; i < len * 2; i++) {
if (i % 2 == 1)
crc ^= prom[i >> 1] & 0x00FF;
else
crc ^= prom[i >> 1] >> 8;
for (j = 0; j < 8; j++) {
if (crc & 0x8000)
crc = (crc << 1) ^ 0x3000;
else
crc <<= 1;
}
}
crc = (crc >> 12) & 0x000F;
return crc_orig != 0x0000 && crc == crc_orig;
}
static int ms5611_read_prom(struct iio_dev *indio_dev)
{
int ret, i;
struct ms5611_state *st = iio_priv(indio_dev);
for (i = 0; i < MS5611_PROM_WORDS_NB; i++) {
ret = st->read_prom_word(&indio_dev->dev,
i, &st->chip_info->prom[i]);
if (ret < 0) {
dev_err(&indio_dev->dev,
"failed to read prom at %d\n", i);
return ret;
}
}
if (!ms5611_prom_is_valid(st->chip_info->prom, MS5611_PROM_WORDS_NB)) {
dev_err(&indio_dev->dev, "PROM integrity check failed\n");
return -ENODEV;
}
return 0;
}
static int ms5611_read_temp_and_pressure(struct iio_dev *indio_dev,
s32 *temp, s32 *pressure)
{
int ret;
struct ms5611_state *st = iio_priv(indio_dev);
ret = st->read_adc_temp_and_pressure(&indio_dev->dev, temp, pressure);
if (ret < 0) {
dev_err(&indio_dev->dev,
"failed to read temperature and pressure\n");
return ret;
}
return st->chip_info->temp_and_pressure_compensate(st->chip_info,
temp, pressure);
}
static int ms5611_temp_and_pressure_compensate(struct ms5611_chip_info *chip_info,
s32 *temp, s32 *pressure)
{
s32 t = *temp, p = *pressure;
s64 off, sens, dt;
dt = t - (chip_info->prom[5] << 8);
off = ((s64)chip_info->prom[2] << 16) + ((chip_info->prom[4] * dt) >> 7);
sens = ((s64)chip_info->prom[1] << 15) + ((chip_info->prom[3] * dt) >> 8);
t = 2000 + ((chip_info->prom[6] * dt) >> 23);
if (t < 2000) {
s64 off2, sens2, t2;
t2 = (dt * dt) >> 31;
off2 = (5 * (t - 2000) * (t - 2000)) >> 1;
sens2 = off2 >> 1;
if (t < -1500) {
s64 tmp = (t + 1500) * (t + 1500);
off2 += 7 * tmp;
sens2 += (11 * tmp) >> 1;
}
t -= t2;
off -= off2;
sens -= sens2;
}
*temp = t;
*pressure = (((p * sens) >> 21) - off) >> 15;
return 0;
}
static int ms5607_temp_and_pressure_compensate(struct ms5611_chip_info *chip_info,
s32 *temp, s32 *pressure)
{
s32 t = *temp, p = *pressure;
s64 off, sens, dt;
dt = t - (chip_info->prom[5] << 8);
off = ((s64)chip_info->prom[2] << 17) + ((chip_info->prom[4] * dt) >> 6);
sens = ((s64)chip_info->prom[1] << 16) + ((chip_info->prom[3] * dt) >> 7);
t = 2000 + ((chip_info->prom[6] * dt) >> 23);
if (t < 2000) {
s64 off2, sens2, t2, tmp;
t2 = (dt * dt) >> 31;
tmp = (t - 2000) * (t - 2000);
off2 = (61 * tmp) >> 4;
sens2 = tmp << 1;
if (t < -1500) {
tmp = (t + 1500) * (t + 1500);
off2 += 15 * tmp;
sens2 += 8 * tmp;
}
t -= t2;
off -= off2;
sens -= sens2;
}
*temp = t;
*pressure = (((p * sens) >> 21) - off) >> 15;
return 0;
}
static int ms5611_reset(struct iio_dev *indio_dev)
{
int ret;
struct ms5611_state *st = iio_priv(indio_dev);
ret = st->reset(&indio_dev->dev);
if (ret < 0) {
dev_err(&indio_dev->dev, "failed to reset device\n");
return ret;
}
usleep_range(3000, 4000);
return 0;
}
static irqreturn_t ms5611_trigger_handler(int irq, void *p)
{
struct iio_poll_func *pf = p;
struct iio_dev *indio_dev = pf->indio_dev;
struct ms5611_state *st = iio_priv(indio_dev);
s32 buf[4]; /* s32 (pressure) + s32 (temp) + 2 * s32 (timestamp) */
int ret;
mutex_lock(&st->lock);
ret = ms5611_read_temp_and_pressure(indio_dev, &buf[1], &buf[0]);
mutex_unlock(&st->lock);
if (ret < 0)
goto err;
iio_push_to_buffers_with_timestamp(indio_dev, buf, iio_get_time_ns());
err:
iio_trigger_notify_done(indio_dev->trig);
return IRQ_HANDLED;
}
static int ms5611_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val, int *val2, long mask)
{
int ret;
s32 temp, pressure;
struct ms5611_state *st = iio_priv(indio_dev);
switch (mask) {
case IIO_CHAN_INFO_PROCESSED:
mutex_lock(&st->lock);
ret = ms5611_read_temp_and_pressure(indio_dev,
&temp, &pressure);
mutex_unlock(&st->lock);
if (ret < 0)
return ret;
switch (chan->type) {
case IIO_TEMP:
*val = temp * 10;
return IIO_VAL_INT;
case IIO_PRESSURE:
*val = pressure / 1000;
*val2 = (pressure % 1000) * 1000;
return IIO_VAL_INT_PLUS_MICRO;
default:
return -EINVAL;
}
case IIO_CHAN_INFO_SCALE:
switch (chan->type) {
case IIO_TEMP:
*val = 10;
return IIO_VAL_INT;
case IIO_PRESSURE:
*val = 0;
*val2 = 1000;
return IIO_VAL_INT_PLUS_MICRO;
default:
return -EINVAL;
}
}
return -EINVAL;
}
static const unsigned long ms5611_scan_masks[] = {0x3, 0};
static struct ms5611_chip_info chip_info_tbl[] = {
[MS5611] = {
.temp_and_pressure_compensate = ms5611_temp_and_pressure_compensate,
},
[MS5607] = {
.temp_and_pressure_compensate = ms5607_temp_and_pressure_compensate,
}
};
static const struct iio_chan_spec ms5611_channels[] = {
{
.type = IIO_PRESSURE,
.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
BIT(IIO_CHAN_INFO_SCALE),
.scan_index = 0,
.scan_type = {
.sign = 's',
.realbits = 32,
.storagebits = 32,
.endianness = IIO_CPU,
},
},
{
.type = IIO_TEMP,
.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
BIT(IIO_CHAN_INFO_SCALE),
.scan_index = 1,
.scan_type = {
.sign = 's',
.realbits = 32,
.storagebits = 32,
.endianness = IIO_CPU,
},
},
IIO_CHAN_SOFT_TIMESTAMP(2),
};
static const struct iio_info ms5611_info = {
.read_raw = &ms5611_read_raw,
.driver_module = THIS_MODULE,
};
static int ms5611_init(struct iio_dev *indio_dev)
{
int ret;
struct regulator *vdd = devm_regulator_get(indio_dev->dev.parent,
"vdd");
/* Enable attached regulator if any. */
if (!IS_ERR(vdd)) {
ret = regulator_enable(vdd);
if (ret) {
dev_err(indio_dev->dev.parent,
"failed to enable Vdd supply: %d\n", ret);
return ret;
}
}
ret = ms5611_reset(indio_dev);
if (ret < 0)
return ret;
return ms5611_read_prom(indio_dev);
}
int ms5611_probe(struct iio_dev *indio_dev, struct device *dev,
const char *name, int type)
{
int ret;
struct ms5611_state *st = iio_priv(indio_dev);
mutex_init(&st->lock);
st->chip_info = &chip_info_tbl[type];
indio_dev->dev.parent = dev;
indio_dev->name = name;
indio_dev->info = &ms5611_info;
indio_dev->channels = ms5611_channels;
indio_dev->num_channels = ARRAY_SIZE(ms5611_channels);
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->available_scan_masks = ms5611_scan_masks;
ret = ms5611_init(indio_dev);
if (ret < 0)
return ret;
ret = iio_triggered_buffer_setup(indio_dev, NULL,
ms5611_trigger_handler, NULL);
if (ret < 0) {
dev_err(dev, "iio triggered buffer setup failed\n");
return ret;
}
ret = iio_device_register(indio_dev);
if (ret < 0) {
dev_err(dev, "unable to register iio device\n");
goto err_buffer_cleanup;
}
return 0;
err_buffer_cleanup:
iio_triggered_buffer_cleanup(indio_dev);
return ret;
}
EXPORT_SYMBOL(ms5611_probe);
int ms5611_remove(struct iio_dev *indio_dev)
{
iio_device_unregister(indio_dev);
iio_triggered_buffer_cleanup(indio_dev);
return 0;
}
EXPORT_SYMBOL(ms5611_remove);
MODULE_AUTHOR("Tomasz Duszynski <tduszyns@gmail.com>");
MODULE_DESCRIPTION("MS5611 core driver");
MODULE_LICENSE("GPL v2");
|