#include <linux/version.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/fb.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/vmalloc.h>
#include <linux/pagemap.h>
#include <linux/console.h>
#ifdef CONFIG_MTRR
#include <asm/mtrr.h>
#endif
#include <linux/platform_device.h>
#include <linux/screen_info.h>
#include <linux/sizes.h>

#include "sm750.h"
#include "ddk750.h"
#include "sm750_accel.h"

int hw_sm750_map(struct sm750_dev *sm750_dev, struct pci_dev *pdev)
{
	int ret;

	ret = 0;

	sm750_dev->vidreg_start  = pci_resource_start(pdev, 1);
	sm750_dev->vidreg_size = SZ_2M;

	pr_info("mmio phyAddr = %lx\n", sm750_dev->vidreg_start);

	/* reserve the vidreg space of smi adaptor
	 * if you do this, u need to add release region code
	 * in lynxfb_remove, or memory will not be mapped again
	 * successfully
	 * */
	ret = pci_request_region(pdev, 1, "sm750fb");
	if (ret) {
		pr_err("Can not request PCI regions.\n");
		goto exit;
	}

	/* now map mmio and vidmem*/
	sm750_dev->pvReg = ioremap_nocache(sm750_dev->vidreg_start,
					   sm750_dev->vidreg_size);
	if (!sm750_dev->pvReg) {
		pr_err("mmio failed\n");
		ret = -EFAULT;
		goto exit;
	} else {
		pr_info("mmio virtual addr = %p\n", sm750_dev->pvReg);
	}


	sm750_dev->accel.dprBase = sm750_dev->pvReg + DE_BASE_ADDR_TYPE1;
	sm750_dev->accel.dpPortBase = sm750_dev->pvReg + DE_PORT_ADDR_TYPE1;

	ddk750_set_mmio(sm750_dev->pvReg, sm750_dev->devid, sm750_dev->revid);

	sm750_dev->vidmem_start = pci_resource_start(pdev, 0);
	/* don't use pdev_resource[x].end - resource[x].start to
	 * calculate the resource size,its only the maximum available
	 * size but not the actual size,use
	 * @ddk750_getVMSize function can be safe.
	 * */
	sm750_dev->vidmem_size = ddk750_getVMSize();
	pr_info("video memory phyAddr = %lx, size = %u bytes\n",
		sm750_dev->vidmem_start, sm750_dev->vidmem_size);

	/* reserve the vidmem space of smi adaptor */
	sm750_dev->pvMem = ioremap_wc(sm750_dev->vidmem_start,
				      sm750_dev->vidmem_size);
	if (!sm750_dev->pvMem) {
		pr_err("Map video memory failed\n");
		ret = -EFAULT;
		goto exit;
	} else {
		pr_info("video memory vaddr = %p\n", sm750_dev->pvMem);
	}
exit:
	return ret;
}



int hw_sm750_inithw(struct sm750_dev *sm750_dev, struct pci_dev *pdev)
{
	struct init_status *parm;

	parm = &sm750_dev->initParm;
	if (parm->chip_clk == 0)
		parm->chip_clk = (getChipType() == SM750LE) ?
						DEFAULT_SM750LE_CHIP_CLOCK :
						DEFAULT_SM750_CHIP_CLOCK;

	if (parm->mem_clk == 0)
		parm->mem_clk = parm->chip_clk;
	if (parm->master_clk == 0)
		parm->master_clk = parm->chip_clk/3;

	ddk750_initHw((initchip_param_t *)&sm750_dev->initParm);
	/* for sm718,open pci burst */
	if (sm750_dev->devid == 0x718) {
		POKE32(SYSTEM_CTRL,
				FIELD_SET(PEEK32(SYSTEM_CTRL), SYSTEM_CTRL, PCI_BURST, ON));
	}

	if (getChipType() != SM750LE) {
		/* does user need CRT ?*/
		if (sm750_dev->nocrt) {
			POKE32(MISC_CTRL,
					FIELD_SET(PEEK32(MISC_CTRL),
					MISC_CTRL,
					DAC_POWER, OFF));
			/* shut off dpms */
			POKE32(SYSTEM_CTRL,
					FIELD_SET(PEEK32(SYSTEM_CTRL),
					SYSTEM_CTRL,
					DPMS, VNHN));
		} else {
			POKE32(MISC_CTRL,
					FIELD_SET(PEEK32(MISC_CTRL),
					MISC_CTRL,
					DAC_POWER, ON));
			/* turn on dpms */
			POKE32(SYSTEM_CTRL,
					FIELD_SET(PEEK32(SYSTEM_CTRL),
					SYSTEM_CTRL,
					DPMS, VPHP));
		}

		switch (sm750_dev->pnltype) {
		case sm750_doubleTFT:
		case sm750_24TFT:
		case sm750_dualTFT:
		POKE32(PANEL_DISPLAY_CTRL,
			FIELD_VALUE(PEEK32(PANEL_DISPLAY_CTRL),
						PANEL_DISPLAY_CTRL,
						TFT_DISP,
						sm750_dev->pnltype));
		break;
		}
	} else {
		/* for 750LE ,no DVI chip initilization makes Monitor no signal */
		/* Set up GPIO for software I2C to program DVI chip in the
		   Xilinx SP605 board, in order to have video signal.
		 */
	sm750_sw_i2c_init(0, 1);


	/* Customer may NOT use CH7301 DVI chip, which has to be
	   initialized differently.
	*/
	if (sm750_sw_i2c_read_reg(0xec, 0x4a) == 0x95) {
		/* The following register values for CH7301 are from
		   Chrontel app note and our experiment.
		*/
			pr_info("yes,CH7301 DVI chip found\n");
		sm750_sw_i2c_write_reg(0xec, 0x1d, 0x16);
		sm750_sw_i2c_write_reg(0xec, 0x21, 0x9);
		sm750_sw_i2c_write_reg(0xec, 0x49, 0xC0);
			pr_info("okay,CH7301 DVI chip setup done\n");
	}
	}

	/* init 2d engine */
	if (!sm750_dev->accel_off)
		hw_sm750_initAccel(sm750_dev);

	return 0;
}

int hw_sm750_output_setMode(struct lynxfb_output *output,
									struct fb_var_screeninfo *var, struct fb_fix_screeninfo *fix)
{
	int ret;
	disp_output_t dispSet;
	int channel;

	ret = 0;
	dispSet = 0;
	channel = *output->channel;


	if (getChipType() != SM750LE) {
		if (channel == sm750_primary) {
			pr_info("primary channel\n");
			if (output->paths & sm750_panel)
				dispSet |= do_LCD1_PRI;
			if (output->paths & sm750_crt)
				dispSet |= do_CRT_PRI;

		} else {
			pr_info("secondary channel\n");
			if (output->paths & sm750_panel)
				dispSet |= do_LCD1_SEC;
			if (output->paths & sm750_crt)
				dispSet |= do_CRT_SEC;

		}
		ddk750_setLogicalDispOut(dispSet);
	} else {
		/* just open DISPLAY_CONTROL_750LE register bit 3:0*/
		u32 reg;

		reg = PEEK32(DISPLAY_CONTROL_750LE);
		reg |= 0xf;
		POKE32(DISPLAY_CONTROL_750LE, reg);
	}

	pr_info("ddk setlogicdispout done\n");
	return ret;
}

int hw_sm750_crtc_checkMode(struct lynxfb_crtc *crtc, struct fb_var_screeninfo *var)
{
	struct sm750_dev *sm750_dev;
	struct lynxfb_par *par = container_of(crtc, struct lynxfb_par, crtc);

	sm750_dev = par->dev;

	switch (var->bits_per_pixel) {
	case 8:
	case 16:
		break;
	case 32:
		if (sm750_dev->revid == SM750LE_REVISION_ID) {
			pr_debug("750le do not support 32bpp\n");
			return -EINVAL;
		}
		break;
	default:
		return -EINVAL;

	}

	return 0;
}


/*
	set the controller's mode for @crtc charged with @var and @fix parameters
*/
int hw_sm750_crtc_setMode(struct lynxfb_crtc *crtc,
								struct fb_var_screeninfo *var,
								struct fb_fix_screeninfo *fix)
{
	int ret, fmt;
	u32 reg;
	mode_parameter_t modparm;
	clock_type_t clock;
	struct sm750_dev *sm750_dev;
	struct lynxfb_par *par;


	ret = 0;
	par = container_of(crtc, struct lynxfb_par, crtc);
	sm750_dev = par->dev;

	if (!sm750_dev->accel_off) {
		/* set 2d engine pixel format according to mode bpp */
		switch (var->bits_per_pixel) {
		case 8:
			fmt = 0;
			break;
		case 16:
			fmt = 1;
			break;
		case 32:
		default:
			fmt = 2;
			break;
		}
		hw_set2dformat(&sm750_dev->accel, fmt);
	}

	/* set timing */
	modparm.pixel_clock = ps_to_hz(var->pixclock);
	modparm.vertical_sync_polarity = (var->sync & FB_SYNC_HOR_HIGH_ACT) ? POS:NEG;
	modparm.horizontal_sync_polarity = (var->sync & FB_SYNC_VERT_HIGH_ACT) ? POS:NEG;
	modparm.clock_phase_polarity = (var->sync & FB_SYNC_COMP_HIGH_ACT) ? POS:NEG;
	modparm.horizontal_display_end = var->xres;
	modparm.horizontal_sync_width = var->hsync_len;
	modparm.horizontal_sync_start = var->xres + var->right_margin;
	modparm.horizontal_total = var->xres + var->left_margin + var->right_margin + var->hsync_len;
	modparm.vertical_display_end = var->yres;
	modparm.vertical_sync_height = var->vsync_len;
	modparm.vertical_sync_start = var->yres + var->lower_margin;
	modparm.vertical_total = var->yres + var->upper_margin + var->lower_margin + var->vsync_len;

	/* choose pll */
	if (crtc->channel != sm750_secondary)
		clock = PRIMARY_PLL;
	else
		clock = SECONDARY_PLL;

	pr_debug("Request pixel clock = %lu\n", modparm.pixel_clock);
	ret = ddk750_setModeTiming(&modparm, clock);
	if (ret) {
		pr_err("Set mode timing failed\n");
		goto exit;
	}

	if (crtc->channel != sm750_secondary) {
		/* set pitch, offset ,width,start address ,etc... */
		POKE32(PANEL_FB_ADDRESS,
			FIELD_SET(0, PANEL_FB_ADDRESS, STATUS, CURRENT)|
			FIELD_SET(0, PANEL_FB_ADDRESS, EXT, LOCAL)|
			FIELD_VALUE(0, PANEL_FB_ADDRESS, ADDRESS, crtc->oScreen));

		reg = var->xres * (var->bits_per_pixel >> 3);
		/* crtc->channel is not equal to par->index on numeric,be aware of that */
		reg = ALIGN(reg, crtc->line_pad);

		POKE32(PANEL_FB_WIDTH,
			FIELD_VALUE(0, PANEL_FB_WIDTH, WIDTH, reg)|
			FIELD_VALUE(0, PANEL_FB_WIDTH, OFFSET, fix->line_length));

		POKE32(PANEL_WINDOW_WIDTH,
			FIELD_VALUE(0, PANEL_WINDOW_WIDTH, WIDTH, var->xres - 1)|
			FIELD_VALUE(0, PANEL_WINDOW_WIDTH, X, var->xoffset));

		POKE32(PANEL_WINDOW_HEIGHT,
			FIELD_VALUE(0, PANEL_WINDOW_HEIGHT, HEIGHT, var->yres_virtual - 1)|
			FIELD_VALUE(0, PANEL_WINDOW_HEIGHT, Y, var->yoffset));

		POKE32(PANEL_PLANE_TL, 0);

		POKE32(PANEL_PLANE_BR,
			FIELD_VALUE(0, PANEL_PLANE_BR, BOTTOM, var->yres - 1)|
			FIELD_VALUE(0, PANEL_PLANE_BR, RIGHT, var->xres - 1));

		/* set pixel format */
		reg = PEEK32(PANEL_DISPLAY_CTRL);
		POKE32(PANEL_DISPLAY_CTRL,
			FIELD_VALUE(reg,
			PANEL_DISPLAY_CTRL, FORMAT,
			(var->bits_per_pixel >> 4)
			));
	} else {
		/* not implemented now */
		POKE32(CRT_FB_ADDRESS, crtc->oScreen);
		reg = var->xres * (var->bits_per_pixel >> 3);
		/* crtc->channel is not equal to par->index on numeric,be aware of that */
		reg = ALIGN(reg, crtc->line_pad);

		POKE32(CRT_FB_WIDTH,
			FIELD_VALUE(0, CRT_FB_WIDTH, WIDTH, reg)|
			FIELD_VALUE(0, CRT_FB_WIDTH, OFFSET, fix->line_length));

		/* SET PIXEL FORMAT */
		reg = PEEK32(CRT_DISPLAY_CTRL);
		reg = FIELD_VALUE(reg, CRT_DISPLAY_CTRL, FORMAT, var->bits_per_pixel >> 4);
		POKE32(CRT_DISPLAY_CTRL, reg);

	}


exit:
	return ret;
}

int hw_sm750_setColReg(struct lynxfb_crtc *crtc, ushort index,
								ushort red, ushort green, ushort blue)
{
	static unsigned int add[] = {PANEL_PALETTE_RAM, CRT_PALETTE_RAM};

	POKE32(add[crtc->channel] + index*4, (red<<16)|(green<<8)|blue);
	return 0;
}

int hw_sm750le_setBLANK(struct lynxfb_output *output, int blank)
{
	int dpms, crtdb;

	switch (blank) {
	case FB_BLANK_UNBLANK:
		dpms = CRT_DISPLAY_CTRL_DPMS_0;
		crtdb = CRT_DISPLAY_CTRL_BLANK_OFF;
		break;
	case FB_BLANK_NORMAL:
		dpms = CRT_DISPLAY_CTRL_DPMS_0;
		crtdb = CRT_DISPLAY_CTRL_BLANK_ON;
		break;
	case FB_BLANK_VSYNC_SUSPEND:
		dpms = CRT_DISPLAY_CTRL_DPMS_2;
		crtdb = CRT_DISPLAY_CTRL_BLANK_ON;
		break;
	case FB_BLANK_HSYNC_SUSPEND:
		dpms = CRT_DISPLAY_CTRL_DPMS_1;
		crtdb = CRT_DISPLAY_CTRL_BLANK_ON;
		break;
	case FB_BLANK_POWERDOWN:
		dpms = CRT_DISPLAY_CTRL_DPMS_3;
		crtdb = CRT_DISPLAY_CTRL_BLANK_ON;
		break;
	default:
		return -EINVAL;
	}

	if (output->paths & sm750_crt) {
		POKE32(CRT_DISPLAY_CTRL, FIELD_VALUE(PEEK32(CRT_DISPLAY_CTRL), CRT_DISPLAY_CTRL, DPMS, dpms));
		POKE32(CRT_DISPLAY_CTRL, FIELD_VALUE(PEEK32(CRT_DISPLAY_CTRL), CRT_DISPLAY_CTRL, BLANK, crtdb));
	}
	return 0;
}

int hw_sm750_setBLANK(struct lynxfb_output *output, int blank)
{
	unsigned int dpms, pps, crtdb;

	dpms = pps = crtdb = 0;

	switch (blank) {
	case FB_BLANK_UNBLANK:
		pr_info("flag = FB_BLANK_UNBLANK\n");
		dpms = SYSTEM_CTRL_DPMS_VPHP;
		pps = PANEL_DISPLAY_CTRL_DATA_ENABLE;
		crtdb = CRT_DISPLAY_CTRL_BLANK_OFF;
		break;
	case FB_BLANK_NORMAL:
		pr_info("flag = FB_BLANK_NORMAL\n");
		dpms = SYSTEM_CTRL_DPMS_VPHP;
		pps = PANEL_DISPLAY_CTRL_DATA_DISABLE;
		crtdb = CRT_DISPLAY_CTRL_BLANK_ON;
		break;
	case FB_BLANK_VSYNC_SUSPEND:
		dpms = SYSTEM_CTRL_DPMS_VNHP;
		pps = PANEL_DISPLAY_CTRL_DATA_DISABLE;
		crtdb = CRT_DISPLAY_CTRL_BLANK_ON;
		break;
	case FB_BLANK_HSYNC_SUSPEND:
		dpms = SYSTEM_CTRL_DPMS_VPHN;
		pps = PANEL_DISPLAY_CTRL_DATA_DISABLE;
		crtdb = CRT_DISPLAY_CTRL_BLANK_ON;
		break;
	case FB_BLANK_POWERDOWN:
		dpms = SYSTEM_CTRL_DPMS_VNHN;
		pps = PANEL_DISPLAY_CTRL_DATA_DISABLE;
		crtdb = CRT_DISPLAY_CTRL_BLANK_ON;
		break;
	}

	if (output->paths & sm750_crt) {

		POKE32(SYSTEM_CTRL, FIELD_VALUE(PEEK32(SYSTEM_CTRL), SYSTEM_CTRL, DPMS, dpms));
		POKE32(CRT_DISPLAY_CTRL, FIELD_VALUE(PEEK32(CRT_DISPLAY_CTRL), CRT_DISPLAY_CTRL, BLANK, crtdb));
	}

	if (output->paths & sm750_panel)
		POKE32(PANEL_DISPLAY_CTRL, FIELD_VALUE(PEEK32(PANEL_DISPLAY_CTRL), PANEL_DISPLAY_CTRL, DATA, pps));

	return 0;
}


void hw_sm750_initAccel(struct sm750_dev *sm750_dev)
{
	u32 reg;

	enable2DEngine(1);

	if (getChipType() == SM750LE) {
		reg = PEEK32(DE_STATE1);
		reg = FIELD_SET(reg, DE_STATE1, DE_ABORT, ON);
		POKE32(DE_STATE1, reg);

		reg = PEEK32(DE_STATE1);
		reg = FIELD_SET(reg, DE_STATE1, DE_ABORT, OFF);
		POKE32(DE_STATE1, reg);

	} else {
		/* engine reset */
		reg = PEEK32(SYSTEM_CTRL);
	    reg = FIELD_SET(reg, SYSTEM_CTRL, DE_ABORT, ON);
		POKE32(SYSTEM_CTRL, reg);

		reg = PEEK32(SYSTEM_CTRL);
		reg = FIELD_SET(reg, SYSTEM_CTRL, DE_ABORT, OFF);
		POKE32(SYSTEM_CTRL, reg);
	}

	/* call 2d init */
	sm750_dev->accel.de_init(&sm750_dev->accel);
}

int hw_sm750le_deWait(void)
{
	int i = 0x10000000;

	while (i--) {
		unsigned int dwVal = PEEK32(DE_STATE2);

		if ((FIELD_GET(dwVal, DE_STATE2, DE_STATUS) == DE_STATE2_DE_STATUS_IDLE) &&
			(FIELD_GET(dwVal, DE_STATE2, DE_FIFO)  == DE_STATE2_DE_FIFO_EMPTY) &&
			(FIELD_GET(dwVal, DE_STATE2, DE_MEM_FIFO) == DE_STATE2_DE_MEM_FIFO_EMPTY)) {
			return 0;
		}
	}
	/* timeout error */
	return -1;
}


int hw_sm750_deWait(void)
{
	int i = 0x10000000;

	while (i--) {
		unsigned int dwVal = PEEK32(SYSTEM_CTRL);

		if ((FIELD_GET(dwVal, SYSTEM_CTRL, DE_STATUS) == SYSTEM_CTRL_DE_STATUS_IDLE) &&
			(FIELD_GET(dwVal, SYSTEM_CTRL, DE_FIFO)  == SYSTEM_CTRL_DE_FIFO_EMPTY) &&
			(FIELD_GET(dwVal, SYSTEM_CTRL, DE_MEM_FIFO) == SYSTEM_CTRL_DE_MEM_FIFO_EMPTY)) {
			return 0;
		}
	}
	/* timeout error */
	return -1;
}

int hw_sm750_pan_display(struct lynxfb_crtc *crtc,
	const struct fb_var_screeninfo *var,
	const struct fb_info *info)
{
	uint32_t total;
	/* check params */
	if ((var->xoffset + var->xres > var->xres_virtual) ||
	    (var->yoffset + var->yres > var->yres_virtual)) {
		return -EINVAL;
	}

	total = var->yoffset * info->fix.line_length +
		((var->xoffset * var->bits_per_pixel) >> 3);
	total += crtc->oScreen;
	if (crtc->channel == sm750_primary) {
		POKE32(PANEL_FB_ADDRESS,
			FIELD_VALUE(PEEK32(PANEL_FB_ADDRESS),
				PANEL_FB_ADDRESS, ADDRESS, total));
	} else {
		POKE32(CRT_FB_ADDRESS,
			FIELD_VALUE(PEEK32(CRT_FB_ADDRESS),
				CRT_FB_ADDRESS, ADDRESS, total));
	}
	return 0;
}