Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 | /*
* ad2s1200.c simple support for the ADI Resolver to Digital Converters:
* AD2S1200/1205
*
* Copyright (c) 2010-2010 Analog Devices Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/types.h>
#include <linux/mutex.h>
#include <linux/device.h>
#include <linux/spi/spi.h>
#include <linux/slab.h>
#include <linux/sysfs.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/bitops.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#define DRV_NAME "ad2s1200"
/* input pin sample and rdvel is controlled by driver */
#define AD2S1200_PN 2
/* input clock on serial interface */
#define AD2S1200_HZ 8192000
/* clock period in nano second */
#define AD2S1200_TSCLK (1000000000/AD2S1200_HZ)
struct ad2s1200_state {
struct mutex lock;
struct spi_device *sdev;
int sample;
int rdvel;
u8 rx[2] ____cacheline_aligned;
};
static int ad2s1200_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val,
int *val2,
long m)
{
int ret = 0;
s16 vel;
struct ad2s1200_state *st = iio_priv(indio_dev);
mutex_lock(&st->lock);
gpio_set_value(st->sample, 0);
/* delay (6 * AD2S1200_TSCLK + 20) nano seconds */
udelay(1);
gpio_set_value(st->sample, 1);
gpio_set_value(st->rdvel, !!(chan->type == IIO_ANGL));
ret = spi_read(st->sdev, st->rx, 2);
if (ret < 0) {
mutex_unlock(&st->lock);
return ret;
}
switch (chan->type) {
case IIO_ANGL:
*val = (((u16)(st->rx[0])) << 4) | ((st->rx[1] & 0xF0) >> 4);
break;
case IIO_ANGL_VEL:
vel = (((s16)(st->rx[0])) << 4) | ((st->rx[1] & 0xF0) >> 4);
vel = sign_extend32(vel, 11);
*val = vel;
break;
default:
mutex_unlock(&st->lock);
return -EINVAL;
}
/* delay (2 * AD2S1200_TSCLK + 20) ns for sample pulse */
udelay(1);
mutex_unlock(&st->lock);
return IIO_VAL_INT;
}
static const struct iio_chan_spec ad2s1200_channels[] = {
{
.type = IIO_ANGL,
.indexed = 1,
.channel = 0,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
}, {
.type = IIO_ANGL_VEL,
.indexed = 1,
.channel = 0,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
}
};
static const struct iio_info ad2s1200_info = {
.read_raw = &ad2s1200_read_raw,
.driver_module = THIS_MODULE,
};
static int ad2s1200_probe(struct spi_device *spi)
{
struct ad2s1200_state *st;
struct iio_dev *indio_dev;
int pn, ret = 0;
unsigned short *pins = spi->dev.platform_data;
for (pn = 0; pn < AD2S1200_PN; pn++) {
ret = devm_gpio_request_one(&spi->dev, pins[pn], GPIOF_DIR_OUT,
DRV_NAME);
if (ret) {
dev_err(&spi->dev, "request gpio pin %d failed\n",
pins[pn]);
return ret;
}
}
indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
if (!indio_dev)
return -ENOMEM;
spi_set_drvdata(spi, indio_dev);
st = iio_priv(indio_dev);
mutex_init(&st->lock);
st->sdev = spi;
st->sample = pins[0];
st->rdvel = pins[1];
indio_dev->dev.parent = &spi->dev;
indio_dev->info = &ad2s1200_info;
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->channels = ad2s1200_channels;
indio_dev->num_channels = ARRAY_SIZE(ad2s1200_channels);
indio_dev->name = spi_get_device_id(spi)->name;
ret = devm_iio_device_register(&spi->dev, indio_dev);
if (ret)
return ret;
spi->max_speed_hz = AD2S1200_HZ;
spi->mode = SPI_MODE_3;
spi_setup(spi);
return 0;
}
static const struct spi_device_id ad2s1200_id[] = {
{ "ad2s1200" },
{ "ad2s1205" },
{}
};
MODULE_DEVICE_TABLE(spi, ad2s1200_id);
static struct spi_driver ad2s1200_driver = {
.driver = {
.name = DRV_NAME,
},
.probe = ad2s1200_probe,
.id_table = ad2s1200_id,
};
module_spi_driver(ad2s1200_driver);
MODULE_AUTHOR("Graff Yang <graff.yang@gmail.com>");
MODULE_DESCRIPTION("Analog Devices AD2S1200/1205 Resolver to Digital SPI driver");
MODULE_LICENSE("GPL v2");
|