Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 | /**
* tusb1210.c - TUSB1210 USB ULPI PHY driver
*
* Copyright (C) 2015 Intel Corporation
*
* Author: Heikki Krogerus <heikki.krogerus@linux.intel.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/ulpi/driver.h>
#include <linux/gpio/consumer.h>
#include "ulpi_phy.h"
#define TUSB1210_VENDOR_SPECIFIC2 0x80
#define TUSB1210_VENDOR_SPECIFIC2_IHSTX_SHIFT 0
#define TUSB1210_VENDOR_SPECIFIC2_ZHSDRV_SHIFT 4
#define TUSB1210_VENDOR_SPECIFIC2_DP_SHIFT 6
struct tusb1210 {
struct ulpi *ulpi;
struct phy *phy;
struct gpio_desc *gpio_reset;
struct gpio_desc *gpio_cs;
u8 vendor_specific2;
};
static int tusb1210_power_on(struct phy *phy)
{
struct tusb1210 *tusb = phy_get_drvdata(phy);
gpiod_set_value_cansleep(tusb->gpio_reset, 1);
gpiod_set_value_cansleep(tusb->gpio_cs, 1);
/* Restore the optional eye diagram optimization value */
if (tusb->vendor_specific2)
ulpi_write(tusb->ulpi, TUSB1210_VENDOR_SPECIFIC2,
tusb->vendor_specific2);
return 0;
}
static int tusb1210_power_off(struct phy *phy)
{
struct tusb1210 *tusb = phy_get_drvdata(phy);
gpiod_set_value_cansleep(tusb->gpio_reset, 0);
gpiod_set_value_cansleep(tusb->gpio_cs, 0);
return 0;
}
static const struct phy_ops phy_ops = {
.power_on = tusb1210_power_on,
.power_off = tusb1210_power_off,
.owner = THIS_MODULE,
};
static int tusb1210_probe(struct ulpi *ulpi)
{
struct tusb1210 *tusb;
u8 val, reg;
tusb = devm_kzalloc(&ulpi->dev, sizeof(*tusb), GFP_KERNEL);
if (!tusb)
return -ENOMEM;
tusb->gpio_reset = devm_gpiod_get_optional(&ulpi->dev, "reset",
GPIOD_OUT_LOW);
if (IS_ERR(tusb->gpio_reset))
return PTR_ERR(tusb->gpio_reset);
gpiod_set_value_cansleep(tusb->gpio_reset, 1);
tusb->gpio_cs = devm_gpiod_get_optional(&ulpi->dev, "cs",
GPIOD_OUT_LOW);
if (IS_ERR(tusb->gpio_cs))
return PTR_ERR(tusb->gpio_cs);
gpiod_set_value_cansleep(tusb->gpio_cs, 1);
/*
* VENDOR_SPECIFIC2 register in TUSB1210 can be used for configuring eye
* diagram optimization and DP/DM swap.
*/
/* High speed output drive strength configuration */
device_property_read_u8(&ulpi->dev, "ihstx", &val);
reg = val << TUSB1210_VENDOR_SPECIFIC2_IHSTX_SHIFT;
/* High speed output impedance configuration */
device_property_read_u8(&ulpi->dev, "zhsdrv", &val);
reg |= val << TUSB1210_VENDOR_SPECIFIC2_ZHSDRV_SHIFT;
/* DP/DM swap control */
device_property_read_u8(&ulpi->dev, "datapolarity", &val);
reg |= val << TUSB1210_VENDOR_SPECIFIC2_DP_SHIFT;
if (reg) {
ulpi_write(ulpi, TUSB1210_VENDOR_SPECIFIC2, reg);
tusb->vendor_specific2 = reg;
}
tusb->phy = ulpi_phy_create(ulpi, &phy_ops);
if (IS_ERR(tusb->phy))
return PTR_ERR(tusb->phy);
tusb->ulpi = ulpi;
phy_set_drvdata(tusb->phy, tusb);
ulpi_set_drvdata(ulpi, tusb);
return 0;
}
static void tusb1210_remove(struct ulpi *ulpi)
{
struct tusb1210 *tusb = ulpi_get_drvdata(ulpi);
ulpi_phy_destroy(ulpi, tusb->phy);
}
#define TI_VENDOR_ID 0x0451
static const struct ulpi_device_id tusb1210_ulpi_id[] = {
{ TI_VENDOR_ID, 0x1507, },
{ },
};
MODULE_DEVICE_TABLE(ulpi, tusb1210_ulpi_id);
static struct ulpi_driver tusb1210_driver = {
.id_table = tusb1210_ulpi_id,
.probe = tusb1210_probe,
.remove = tusb1210_remove,
.driver = {
.name = "tusb1210",
.owner = THIS_MODULE,
},
};
module_ulpi_driver(tusb1210_driver);
MODULE_AUTHOR("Intel Corporation");
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("TUSB1210 ULPI PHY driver");
|