/*
 * (c) Copyright 2002-2010, Ralink Technology, Inc.
 * Copyright (C) 2014 Felix Fietkau <nbd@openwrt.org>
 * Copyright (C) 2015 Jakub Kicinski <kubakici@wp.pl>
 * Copyright (C) 2018 Stanislaw Gruszka <stf_xl@wp.pl>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2
 * as published by the Free Software Foundation
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include <linux/kernel.h>
#include <linux/etherdevice.h>

#include "mt76x0.h"
#include "mcu.h"
#include "eeprom.h"
#include "trace.h"
#include "phy.h"
#include "initvals.h"
#include "initvals_phy.h"
#include "../mt76x02_phy.h"

static int
mt76x0_rf_csr_wr(struct mt76x02_dev *dev, u32 offset, u8 value)
{
	int ret = 0;
	u8 bank, reg;

	if (test_bit(MT76_REMOVED, &dev->mt76.state))
		return -ENODEV;

	bank = MT_RF_BANK(offset);
	reg = MT_RF_REG(offset);

	if (WARN_ON_ONCE(reg > 127) || WARN_ON_ONCE(bank > 8))
		return -EINVAL;

	mutex_lock(&dev->phy_mutex);

	if (!mt76_poll(dev, MT_RF_CSR_CFG, MT_RF_CSR_CFG_KICK, 0, 100)) {
		ret = -ETIMEDOUT;
		goto out;
	}

	mt76_wr(dev, MT_RF_CSR_CFG,
		   FIELD_PREP(MT_RF_CSR_CFG_DATA, value) |
		   FIELD_PREP(MT_RF_CSR_CFG_REG_BANK, bank) |
		   FIELD_PREP(MT_RF_CSR_CFG_REG_ID, reg) |
		   MT_RF_CSR_CFG_WR |
		   MT_RF_CSR_CFG_KICK);
	trace_mt76x0_rf_write(&dev->mt76, bank, offset, value);
out:
	mutex_unlock(&dev->phy_mutex);

	if (ret < 0)
		dev_err(dev->mt76.dev, "Error: RF write %d:%d failed:%d!!\n",
			bank, reg, ret);

	return ret;
}

static int mt76x0_rf_csr_rr(struct mt76x02_dev *dev, u32 offset)
{
	int ret = -ETIMEDOUT;
	u32 val;
	u8 bank, reg;

	if (test_bit(MT76_REMOVED, &dev->mt76.state))
		return -ENODEV;

	bank = MT_RF_BANK(offset);
	reg = MT_RF_REG(offset);

	if (WARN_ON_ONCE(reg > 127) || WARN_ON_ONCE(bank > 8))
		return -EINVAL;

	mutex_lock(&dev->phy_mutex);

	if (!mt76_poll(dev, MT_RF_CSR_CFG, MT_RF_CSR_CFG_KICK, 0, 100))
		goto out;

	mt76_wr(dev, MT_RF_CSR_CFG,
		   FIELD_PREP(MT_RF_CSR_CFG_REG_BANK, bank) |
		   FIELD_PREP(MT_RF_CSR_CFG_REG_ID, reg) |
		   MT_RF_CSR_CFG_KICK);

	if (!mt76_poll(dev, MT_RF_CSR_CFG, MT_RF_CSR_CFG_KICK, 0, 100))
		goto out;

	val = mt76_rr(dev, MT_RF_CSR_CFG);
	if (FIELD_GET(MT_RF_CSR_CFG_REG_ID, val) == reg &&
	    FIELD_GET(MT_RF_CSR_CFG_REG_BANK, val) == bank) {
		ret = FIELD_GET(MT_RF_CSR_CFG_DATA, val);
		trace_mt76x0_rf_read(&dev->mt76, bank, offset, ret);
	}
out:
	mutex_unlock(&dev->phy_mutex);

	if (ret < 0)
		dev_err(dev->mt76.dev, "Error: RF read %d:%d failed:%d!!\n",
			bank, reg, ret);

	return ret;
}

static int
rf_wr(struct mt76x02_dev *dev, u32 offset, u8 val)
{
	if (mt76_is_usb(dev)) {
		struct mt76_reg_pair pair = {
			.reg = offset,
			.value = val,
		};

		WARN_ON_ONCE(!test_bit(MT76_STATE_MCU_RUNNING,
			     &dev->mt76.state));
		return mt76_wr_rp(dev, MT_MCU_MEMMAP_RF, &pair, 1);
	} else {
		return mt76x0_rf_csr_wr(dev, offset, val);
	}
}

static int
rf_rr(struct mt76x02_dev *dev, u32 offset)
{
	int ret;
	u32 val;

	if (mt76_is_usb(dev)) {
		struct mt76_reg_pair pair = {
			.reg = offset,
		};

		WARN_ON_ONCE(!test_bit(MT76_STATE_MCU_RUNNING,
			     &dev->mt76.state));
		ret = mt76_rd_rp(dev, MT_MCU_MEMMAP_RF, &pair, 1);
		val = pair.value;
	} else {
		ret = val = mt76x0_rf_csr_rr(dev, offset);
	}

	return (ret < 0) ? ret : val;
}

static int
rf_rmw(struct mt76x02_dev *dev, u32 offset, u8 mask, u8 val)
{
	int ret;

	ret = rf_rr(dev, offset);
	if (ret < 0)
		return ret;
	val |= ret & ~mask;
	ret = rf_wr(dev, offset, val);
	if (ret)
		return ret;

	return val;
}

static int
rf_set(struct mt76x02_dev *dev, u32 offset, u8 val)
{
	return rf_rmw(dev, offset, 0, val);
}

#if 0
static int
rf_clear(struct mt76x02_dev *dev, u32 offset, u8 mask)
{
	return rf_rmw(dev, offset, mask, 0);
}
#endif

static void
mt76x0_rf_csr_wr_rp(struct mt76x02_dev *dev, const struct mt76_reg_pair *data,
		    int n)
{
	while (n-- > 0) {
		mt76x0_rf_csr_wr(dev, data->reg, data->value);
		data++;
	}
}

#define RF_RANDOM_WRITE(dev, tab) do {					\
	if (mt76_is_mmio(dev))						\
		mt76x0_rf_csr_wr_rp(dev, tab, ARRAY_SIZE(tab));		\
	else								\
		mt76_wr_rp(dev, MT_MCU_MEMMAP_RF, tab, ARRAY_SIZE(tab));\
} while (0)

int mt76x0_wait_bbp_ready(struct mt76x02_dev *dev)
{
	int i = 20;
	u32 val;

	do {
		val = mt76_rr(dev, MT_BBP(CORE, 0));
		if (val && ~val)
			break;
	} while (--i);

	if (!i) {
		dev_err(dev->mt76.dev, "Error: BBP is not ready\n");
		return -EIO;
	}

	dev_dbg(dev->mt76.dev, "BBP version %08x\n", val);
	return 0;
}

static void
mt76x0_phy_set_band(struct mt76x02_dev *dev, enum nl80211_band band)
{
	switch (band) {
	case NL80211_BAND_2GHZ:
		RF_RANDOM_WRITE(dev, mt76x0_rf_2g_channel_0_tab);

		rf_wr(dev, MT_RF(5, 0), 0x45);
		rf_wr(dev, MT_RF(6, 0), 0x44);

		mt76_wr(dev, MT_TX_ALC_VGA3, 0x00050007);
		mt76_wr(dev, MT_TX0_RF_GAIN_CORR, 0x003E0002);
		break;
	case NL80211_BAND_5GHZ:
		RF_RANDOM_WRITE(dev, mt76x0_rf_5g_channel_0_tab);

		rf_wr(dev, MT_RF(5, 0), 0x44);
		rf_wr(dev, MT_RF(6, 0), 0x45);

		mt76_wr(dev, MT_TX_ALC_VGA3, 0x00000005);
		mt76_wr(dev, MT_TX0_RF_GAIN_CORR, 0x01010102);
		break;
	default:
		break;
	}
}

static void
mt76x0_phy_set_chan_rf_params(struct mt76x02_dev *dev, u8 channel, u16 rf_bw_band)
{
	u16 rf_band = rf_bw_band & 0xff00;
	u16 rf_bw = rf_bw_band & 0x00ff;
	enum nl80211_band band;
	u32 mac_reg;
	u8 rf_val;
	int i;
	bool bSDM = false;
	const struct mt76x0_freq_item *freq_item;

	for (i = 0; i < ARRAY_SIZE(mt76x0_sdm_channel); i++) {
		if (channel == mt76x0_sdm_channel[i]) {
			bSDM = true;
			break;
		}
	}

	for (i = 0; i < ARRAY_SIZE(mt76x0_frequency_plan); i++) {
		if (channel == mt76x0_frequency_plan[i].channel) {
			rf_band = mt76x0_frequency_plan[i].band;

			if (bSDM)
				freq_item = &(mt76x0_sdm_frequency_plan[i]);
			else
				freq_item = &(mt76x0_frequency_plan[i]);

			rf_wr(dev, MT_RF(0, 37), freq_item->pllR37);
			rf_wr(dev, MT_RF(0, 36), freq_item->pllR36);
			rf_wr(dev, MT_RF(0, 35), freq_item->pllR35);
			rf_wr(dev, MT_RF(0, 34), freq_item->pllR34);
			rf_wr(dev, MT_RF(0, 33), freq_item->pllR33);

			rf_val = rf_rr(dev, MT_RF(0, 32));
			rf_val &= ~0xE0;
			rf_val |= freq_item->pllR32_b7b5;
			rf_wr(dev, MT_RF(0, 32), rf_val);

			/* R32<4:0> pll_den: (Denomina - 8) */
			rf_val = rf_rr(dev, MT_RF(0, 32));
			rf_val &= ~0x1F;
			rf_val |= freq_item->pllR32_b4b0;
			rf_wr(dev, MT_RF(0, 32), rf_val);

			/* R31<7:5> */
			rf_val = rf_rr(dev, MT_RF(0, 31));
			rf_val &= ~0xE0;
			rf_val |= freq_item->pllR31_b7b5;
			rf_wr(dev, MT_RF(0, 31), rf_val);

			/* R31<4:0> pll_k(Nominator) */
			rf_val = rf_rr(dev, MT_RF(0, 31));
			rf_val &= ~0x1F;
			rf_val |= freq_item->pllR31_b4b0;
			rf_wr(dev, MT_RF(0, 31), rf_val);

			/* R30<7> sdm_reset_n */
			rf_val = rf_rr(dev, MT_RF(0, 30));
			rf_val &= ~0x80;
			if (bSDM) {
				rf_wr(dev, MT_RF(0, 30), rf_val);
				rf_val |= 0x80;
				rf_wr(dev, MT_RF(0, 30), rf_val);
			} else {
				rf_val |= freq_item->pllR30_b7;
				rf_wr(dev, MT_RF(0, 30), rf_val);
			}

			/* R30<6:2> sdmmash_prbs,sin */
			rf_val = rf_rr(dev, MT_RF(0, 30));
			rf_val &= ~0x7C;
			rf_val |= freq_item->pllR30_b6b2;
			rf_wr(dev, MT_RF(0, 30), rf_val);

			/* R30<1> sdm_bp */
			rf_val = rf_rr(dev, MT_RF(0, 30));
			rf_val &= ~0x02;
			rf_val |= (freq_item->pllR30_b1 << 1);
			rf_wr(dev, MT_RF(0, 30), rf_val);

			/* R30<0> R29<7:0> (hex) pll_n */
			rf_val = freq_item->pll_n & 0x00FF;
			rf_wr(dev, MT_RF(0, 29), rf_val);

			rf_val = rf_rr(dev, MT_RF(0, 30));
			rf_val &= ~0x1;
			rf_val |= ((freq_item->pll_n >> 8) & 0x0001);
			rf_wr(dev, MT_RF(0, 30), rf_val);

			/* R28<7:6> isi_iso */
			rf_val = rf_rr(dev, MT_RF(0, 28));
			rf_val &= ~0xC0;
			rf_val |= freq_item->pllR28_b7b6;
			rf_wr(dev, MT_RF(0, 28), rf_val);

			/* R28<5:4> pfd_dly */
			rf_val = rf_rr(dev, MT_RF(0, 28));
			rf_val &= ~0x30;
			rf_val |= freq_item->pllR28_b5b4;
			rf_wr(dev, MT_RF(0, 28), rf_val);

			/* R28<3:2> clksel option */
			rf_val = rf_rr(dev, MT_RF(0, 28));
			rf_val &= ~0x0C;
			rf_val |= freq_item->pllR28_b3b2;
			rf_wr(dev, MT_RF(0, 28), rf_val);

			/* R28<1:0> R27<7:0> R26<7:0> (hex) sdm_k */
			rf_val = freq_item->pll_sdm_k & 0x000000FF;
			rf_wr(dev, MT_RF(0, 26), rf_val);

			rf_val = ((freq_item->pll_sdm_k >> 8) & 0x000000FF);
			rf_wr(dev, MT_RF(0, 27), rf_val);

			rf_val = rf_rr(dev, MT_RF(0, 28));
			rf_val &= ~0x3;
			rf_val |= ((freq_item->pll_sdm_k >> 16) & 0x0003);
			rf_wr(dev, MT_RF(0, 28), rf_val);

			/* R24<1:0> xo_div */
			rf_val = rf_rr(dev, MT_RF(0, 24));
			rf_val &= ~0x3;
			rf_val |= freq_item->pllR24_b1b0;
			rf_wr(dev, MT_RF(0, 24), rf_val);

			break;
		}
	}

	for (i = 0; i < ARRAY_SIZE(mt76x0_rf_bw_switch_tab); i++) {
		if (rf_bw == mt76x0_rf_bw_switch_tab[i].bw_band) {
			rf_wr(dev, mt76x0_rf_bw_switch_tab[i].rf_bank_reg,
				   mt76x0_rf_bw_switch_tab[i].value);
		} else if ((rf_bw == (mt76x0_rf_bw_switch_tab[i].bw_band & 0xFF)) &&
			   (rf_band & mt76x0_rf_bw_switch_tab[i].bw_band)) {
			rf_wr(dev, mt76x0_rf_bw_switch_tab[i].rf_bank_reg,
				   mt76x0_rf_bw_switch_tab[i].value);
		}
	}

	for (i = 0; i < ARRAY_SIZE(mt76x0_rf_band_switch_tab); i++) {
		if (mt76x0_rf_band_switch_tab[i].bw_band & rf_band) {
			rf_wr(dev, mt76x0_rf_band_switch_tab[i].rf_bank_reg,
				   mt76x0_rf_band_switch_tab[i].value);
		}
	}

	mac_reg = mt76_rr(dev, MT_RF_MISC);
	mac_reg &= ~0xC; /* Clear 0x518[3:2] */
	mt76_wr(dev, MT_RF_MISC, mac_reg);

	band = (rf_band & RF_G_BAND) ? NL80211_BAND_2GHZ : NL80211_BAND_5GHZ;
	if (mt76x02_ext_pa_enabled(dev, band)) {
		/*
			MT_RF_MISC (offset: 0x0518)
			[2]1'b1: enable external A band PA, 1'b0: disable external A band PA
			[3]1'b1: enable external G band PA, 1'b0: disable external G band PA
		*/
		if (rf_band & RF_A_BAND) {
			mac_reg = mt76_rr(dev, MT_RF_MISC);
			mac_reg |= 0x4;
			mt76_wr(dev, MT_RF_MISC, mac_reg);
		} else {
			mac_reg = mt76_rr(dev, MT_RF_MISC);
			mac_reg |= 0x8;
			mt76_wr(dev, MT_RF_MISC, mac_reg);
		}

		/* External PA */
		for (i = 0; i < ARRAY_SIZE(mt76x0_rf_ext_pa_tab); i++)
			if (mt76x0_rf_ext_pa_tab[i].bw_band & rf_band)
				rf_wr(dev, mt76x0_rf_ext_pa_tab[i].rf_bank_reg,
					   mt76x0_rf_ext_pa_tab[i].value);
	}

	if (rf_band & RF_G_BAND) {
		mt76_wr(dev, MT_TX0_RF_GAIN_ATTEN, 0x63707400);
		/* Set Atten mode = 2 For G band, Disable Tx Inc dcoc. */
		mac_reg = mt76_rr(dev, MT_TX_ALC_CFG_1);
		mac_reg &= 0x896400FF;
		mt76_wr(dev, MT_TX_ALC_CFG_1, mac_reg);
	} else {
		mt76_wr(dev, MT_TX0_RF_GAIN_ATTEN, 0x686A7800);
		/* Set Atten mode = 0 For Ext A band, Disable Tx Inc dcoc Cal. */
		mac_reg = mt76_rr(dev, MT_TX_ALC_CFG_1);
		mac_reg &= 0x890400FF;
		mt76_wr(dev, MT_TX_ALC_CFG_1, mac_reg);
	}
}

static void
mt76x0_phy_set_chan_bbp_params(struct mt76x02_dev *dev, u16 rf_bw_band)
{
	int i;

	for (i = 0; i < ARRAY_SIZE(mt76x0_bbp_switch_tab); i++) {
		const struct mt76x0_bbp_switch_item *item = &mt76x0_bbp_switch_tab[i];
		const struct mt76_reg_pair *pair = &item->reg_pair;

		if ((rf_bw_band & item->bw_band) != rf_bw_band)
			continue;

		if (pair->reg == MT_BBP(AGC, 8)) {
			u32 val = pair->value;
			u8 gain;

			gain = FIELD_GET(MT_BBP_AGC_GAIN, val);
			gain -= dev->cal.rx.lna_gain * 2;
			val &= ~MT_BBP_AGC_GAIN;
			val |= FIELD_PREP(MT_BBP_AGC_GAIN, gain);
			mt76_wr(dev, pair->reg, val);
		} else {
			mt76_wr(dev, pair->reg, pair->value);
		}
	}
}

static void mt76x0_ant_select(struct mt76x02_dev *dev)
{
	u16 ee_ant = mt76x02_eeprom_get(dev, MT_EE_ANTENNA);
	u16 nic_conf2 = mt76x02_eeprom_get(dev, MT_EE_NIC_CONF_2);
	u32 wlan, coex3, cmb;
	bool ant_div;

	wlan = mt76_rr(dev, MT_WLAN_FUN_CTRL);
	cmb = mt76_rr(dev, MT_CMB_CTRL);
	coex3 = mt76_rr(dev, MT_COEXCFG3);

	cmb   &= ~(BIT(14) | BIT(12));
	wlan  &= ~(BIT(6) | BIT(5));
	coex3 &= ~GENMASK(5, 2);

	if (ee_ant & MT_EE_ANTENNA_DUAL) {
		/* dual antenna mode */
		ant_div = !(nic_conf2 & MT_EE_NIC_CONF_2_ANT_OPT) &&
			  (nic_conf2 & MT_EE_NIC_CONF_2_ANT_DIV);
		if (ant_div)
			cmb |= BIT(12);
		else
			coex3 |= BIT(4);
		coex3 |= BIT(3);
		if (dev->mt76.cap.has_2ghz)
			wlan |= BIT(6);
	} else {
		/* sigle antenna mode */
		if (dev->mt76.cap.has_5ghz) {
			coex3 |= BIT(3) | BIT(4);
		} else {
			wlan |= BIT(6);
			coex3 |= BIT(1);
		}
	}

	if (is_mt7630(dev))
		cmb |= BIT(14) | BIT(11);

	mt76_wr(dev, MT_WLAN_FUN_CTRL, wlan);
	mt76_wr(dev, MT_CMB_CTRL, cmb);
	mt76_clear(dev, MT_COEXCFG0, BIT(2));
	mt76_wr(dev, MT_COEXCFG3, coex3);
}

static void
mt76x0_bbp_set_bw(struct mt76x02_dev *dev, enum nl80211_chan_width width)
{
	enum { BW_20 = 0, BW_40 = 1, BW_80 = 2, BW_10 = 4};
	int bw;

	switch (width) {
	default:
	case NL80211_CHAN_WIDTH_20_NOHT:
	case NL80211_CHAN_WIDTH_20:
		bw = BW_20;
		break;
	case NL80211_CHAN_WIDTH_40:
		bw = BW_40;
		break;
	case NL80211_CHAN_WIDTH_80:
		bw = BW_80;
		break;
	case NL80211_CHAN_WIDTH_10:
		bw = BW_10;
		break;
	case NL80211_CHAN_WIDTH_80P80:
	case NL80211_CHAN_WIDTH_160:
	case NL80211_CHAN_WIDTH_5:
		/* TODO error */
		return ;
	}

	mt76x02_mcu_function_select(dev, BW_SETTING, bw, false);
}

void mt76x0_phy_set_txpower(struct mt76x02_dev *dev)
{
	struct mt76_rate_power *t = &dev->mt76.rate_power;
	u8 info[2];

	mt76x0_get_power_info(dev, info);
	mt76x0_get_tx_power_per_rate(dev);

	mt76x02_add_rate_power_offset(t, info[0]);
	mt76x02_limit_rate_power(t, dev->mt76.txpower_conf);
	dev->mt76.txpower_cur = mt76x02_get_max_rate_power(t);
	mt76x02_add_rate_power_offset(t, -info[0]);

	mt76x02_phy_set_txpower(dev, info[0], info[1]);
}

void mt76x0_phy_calibrate(struct mt76x02_dev *dev, bool power_on)
{
	struct ieee80211_channel *chan = dev->mt76.chandef.chan;
	int is_5ghz = (chan->band == NL80211_BAND_5GHZ) ? 1 : 0;
	u32 val, tx_alc, reg_val;

	if (is_mt7630(dev))
		return;

	if (power_on) {
		mt76x02_mcu_calibrate(dev, MCU_CAL_R, 0, false);
		mt76x02_mcu_calibrate(dev, MCU_CAL_VCO, chan->hw_value,
				      false);
		usleep_range(10, 20);
		/* XXX: tssi */
	}

	tx_alc = mt76_rr(dev, MT_TX_ALC_CFG_0);
	mt76_wr(dev, MT_TX_ALC_CFG_0, 0);
	usleep_range(500, 700);

	reg_val = mt76_rr(dev, MT_BBP(IBI, 9));
	mt76_wr(dev, MT_BBP(IBI, 9), 0xffffff7e);

	if (is_5ghz) {
		if (chan->hw_value < 100)
			val = 0x701;
		else if (chan->hw_value < 140)
			val = 0x801;
		else
			val = 0x901;
	} else {
		val = 0x600;
	}

	mt76x02_mcu_calibrate(dev, MCU_CAL_FULL, val, false);
	msleep(350);
	mt76x02_mcu_calibrate(dev, MCU_CAL_LC, is_5ghz, false);
	usleep_range(15000, 20000);

	mt76_wr(dev, MT_BBP(IBI, 9), reg_val);
	mt76_wr(dev, MT_TX_ALC_CFG_0, tx_alc);
	mt76x02_mcu_calibrate(dev, MCU_CAL_RXDCOC, 1, false);
}
EXPORT_SYMBOL_GPL(mt76x0_phy_calibrate);

int mt76x0_phy_set_channel(struct mt76x02_dev *dev,
			   struct cfg80211_chan_def *chandef)
{
	u32 ext_cca_chan[4] = {
		[0] = FIELD_PREP(MT_EXT_CCA_CFG_CCA0, 0) |
		      FIELD_PREP(MT_EXT_CCA_CFG_CCA1, 1) |
		      FIELD_PREP(MT_EXT_CCA_CFG_CCA2, 2) |
		      FIELD_PREP(MT_EXT_CCA_CFG_CCA3, 3) |
		      FIELD_PREP(MT_EXT_CCA_CFG_CCA_MASK, BIT(0)),
		[1] = FIELD_PREP(MT_EXT_CCA_CFG_CCA0, 1) |
		      FIELD_PREP(MT_EXT_CCA_CFG_CCA1, 0) |
		      FIELD_PREP(MT_EXT_CCA_CFG_CCA2, 2) |
		      FIELD_PREP(MT_EXT_CCA_CFG_CCA3, 3) |
		      FIELD_PREP(MT_EXT_CCA_CFG_CCA_MASK, BIT(1)),
		[2] = FIELD_PREP(MT_EXT_CCA_CFG_CCA0, 2) |
		      FIELD_PREP(MT_EXT_CCA_CFG_CCA1, 3) |
		      FIELD_PREP(MT_EXT_CCA_CFG_CCA2, 1) |
		      FIELD_PREP(MT_EXT_CCA_CFG_CCA3, 0) |
		      FIELD_PREP(MT_EXT_CCA_CFG_CCA_MASK, BIT(2)),
		[3] = FIELD_PREP(MT_EXT_CCA_CFG_CCA0, 3) |
		      FIELD_PREP(MT_EXT_CCA_CFG_CCA1, 2) |
		      FIELD_PREP(MT_EXT_CCA_CFG_CCA2, 1) |
		      FIELD_PREP(MT_EXT_CCA_CFG_CCA3, 0) |
		      FIELD_PREP(MT_EXT_CCA_CFG_CCA_MASK, BIT(3)),
	};
	bool scan = test_bit(MT76_SCANNING, &dev->mt76.state);
	int ch_group_index, freq, freq1;
	u8 channel;
	u32 val;
	u16 rf_bw_band;

	freq = chandef->chan->center_freq;
	freq1 = chandef->center_freq1;
	channel = chandef->chan->hw_value;
	rf_bw_band = (channel <= 14) ? RF_G_BAND : RF_A_BAND;
	dev->mt76.chandef = *chandef;

	switch (chandef->width) {
	case NL80211_CHAN_WIDTH_40:
		if (freq1 > freq)
			ch_group_index = 0;
		else
			ch_group_index = 1;
		channel += 2 - ch_group_index * 4;
		rf_bw_band |= RF_BW_40;
		break;
	case NL80211_CHAN_WIDTH_80:
		ch_group_index = (freq - freq1 + 30) / 20;
		if (WARN_ON(ch_group_index < 0 || ch_group_index > 3))
			ch_group_index = 0;
		channel += 6 - ch_group_index * 4;
		rf_bw_band |= RF_BW_80;
		break;
	default:
		ch_group_index = 0;
		rf_bw_band |= RF_BW_20;
		break;
	}

	if (mt76_is_usb(dev)) {
		mt76x0_bbp_set_bw(dev, chandef->width);
	} else {
		if (chandef->width == NL80211_CHAN_WIDTH_80 ||
		    chandef->width == NL80211_CHAN_WIDTH_40)
			val = 0x201;
		else
			val = 0x601;
		mt76_wr(dev, MT_TX_SW_CFG0, val);
	}
	mt76x02_phy_set_bw(dev, chandef->width, ch_group_index);
	mt76x02_phy_set_band(dev, chandef->chan->band,
			     ch_group_index & 1);

	mt76_rmw(dev, MT_EXT_CCA_CFG,
		 (MT_EXT_CCA_CFG_CCA0 |
		  MT_EXT_CCA_CFG_CCA1 |
		  MT_EXT_CCA_CFG_CCA2 |
		  MT_EXT_CCA_CFG_CCA3 |
		  MT_EXT_CCA_CFG_CCA_MASK),
		 ext_cca_chan[ch_group_index]);

	mt76x0_phy_set_band(dev, chandef->chan->band);
	mt76x0_phy_set_chan_rf_params(dev, channel, rf_bw_band);

	/* set Japan Tx filter at channel 14 */
	val = mt76_rr(dev, MT_BBP(CORE, 1));
	if (channel == 14)
		val |= 0x20;
	else
		val &= ~0x20;
	mt76_wr(dev, MT_BBP(CORE, 1), val);

	mt76x0_read_rx_gain(dev);
	mt76x0_phy_set_chan_bbp_params(dev, rf_bw_band);

	/* enable vco */
	rf_set(dev, MT_RF(0, 4), BIT(7));

	if (scan)
		return 0;

	mt76x0_phy_calibrate(dev, false);
	mt76x02_init_agc_gain(dev);

	mt76x0_phy_set_txpower(dev);

	ieee80211_queue_delayed_work(dev->mt76.hw, &dev->cal_work,
				     MT_CALIBRATE_INTERVAL);

	return 0;
}

static void mt76x0_temp_sensor(struct mt76x02_dev *dev)
{
	u8 rf_b7_73, rf_b0_66, rf_b0_67;
	s8 val;

	rf_b7_73 = rf_rr(dev, MT_RF(7, 73));
	rf_b0_66 = rf_rr(dev, MT_RF(0, 66));
	rf_b0_67 = rf_rr(dev, MT_RF(0, 67));

	rf_wr(dev, MT_RF(7, 73), 0x02);
	rf_wr(dev, MT_RF(0, 66), 0x23);
	rf_wr(dev, MT_RF(0, 67), 0x01);

	mt76_wr(dev, MT_BBP(CORE, 34), 0x00080055);

	if (!mt76_poll(dev, MT_BBP(CORE, 34), BIT(4), 0, 2000)) {
		mt76_clear(dev, MT_BBP(CORE, 34), BIT(4));
		goto done;
	}

	val = mt76_rr(dev, MT_BBP(CORE, 35));
	val = (35 * (val - dev->cal.rx.temp_offset)) / 10 + 25;

	if (abs(val - dev->cal.temp_vco) > 20) {
		mt76x02_mcu_calibrate(dev, MCU_CAL_VCO,
				      dev->mt76.chandef.chan->hw_value,
				      false);
		dev->cal.temp_vco = val;
	}
	if (abs(val - dev->cal.temp) > 30) {
		mt76x0_phy_calibrate(dev, false);
		dev->cal.temp = val;
	}

done:
	rf_wr(dev, MT_RF(7, 73), rf_b7_73);
	rf_wr(dev, MT_RF(0, 66), rf_b0_66);
	rf_wr(dev, MT_RF(0, 67), rf_b0_67);
}

static void mt76x0_phy_set_gain_val(struct mt76x02_dev *dev)
{
	u8 gain = dev->cal.agc_gain_cur[0] - dev->cal.agc_gain_adjust;

	mt76_rmw_field(dev, MT_BBP(AGC, 8), MT_BBP_AGC_GAIN, gain);
}

static void
mt76x0_phy_update_channel_gain(struct mt76x02_dev *dev)
{
	bool gain_change;
	u8 gain_delta;
	int low_gain;

	dev->cal.avg_rssi_all = mt76x02_phy_get_min_avg_rssi(dev);

	low_gain = (dev->cal.avg_rssi_all > mt76x02_get_rssi_gain_thresh(dev)) +
		   (dev->cal.avg_rssi_all > mt76x02_get_low_rssi_gain_thresh(dev));

	gain_change = dev->cal.low_gain < 0 ||
		      (dev->cal.low_gain & 2) ^ (low_gain & 2);
	dev->cal.low_gain = low_gain;

	if (!gain_change) {
		if (mt76x02_phy_adjust_vga_gain(dev))
			mt76x0_phy_set_gain_val(dev);
		return;
	}

	dev->cal.agc_gain_adjust = (low_gain == 2) ? 0 : 10;
	gain_delta = (low_gain == 2) ? 10 : 0;

	dev->cal.agc_gain_cur[0] = dev->cal.agc_gain_init[0] - gain_delta;
	mt76x0_phy_set_gain_val(dev);

	/* clear false CCA counters */
	mt76_rr(dev, MT_RX_STAT_1);
}

static void mt76x0_phy_calibration_work(struct work_struct *work)
{
	struct mt76x02_dev *dev = container_of(work, struct mt76x02_dev,
					       cal_work.work);

	mt76x0_phy_update_channel_gain(dev);
	if (!mt76x0_tssi_enabled(dev))
		mt76x0_temp_sensor(dev);

	ieee80211_queue_delayed_work(dev->mt76.hw, &dev->cal_work,
				     MT_CALIBRATE_INTERVAL);
}

static void mt76x0_rf_init(struct mt76x02_dev *dev)
{
	int i;
	u8 val;

	RF_RANDOM_WRITE(dev, mt76x0_rf_central_tab);
	RF_RANDOM_WRITE(dev, mt76x0_rf_2g_channel_0_tab);
	RF_RANDOM_WRITE(dev, mt76x0_rf_5g_channel_0_tab);
	RF_RANDOM_WRITE(dev, mt76x0_rf_vga_channel_0_tab);

	for (i = 0; i < ARRAY_SIZE(mt76x0_rf_bw_switch_tab); i++) {
		const struct mt76x0_rf_switch_item *item = &mt76x0_rf_bw_switch_tab[i];

		if (item->bw_band == RF_BW_20)
			rf_wr(dev, item->rf_bank_reg, item->value);
		else if (((RF_G_BAND | RF_BW_20) & item->bw_band) == (RF_G_BAND | RF_BW_20))
			rf_wr(dev, item->rf_bank_reg, item->value);
	}

	for (i = 0; i < ARRAY_SIZE(mt76x0_rf_band_switch_tab); i++) {
		if (mt76x0_rf_band_switch_tab[i].bw_band & RF_G_BAND) {
			rf_wr(dev,
			      mt76x0_rf_band_switch_tab[i].rf_bank_reg,
			      mt76x0_rf_band_switch_tab[i].value);
		}
	}

	/*
	   Frequency calibration
	   E1: B0.R22<6:0>: xo_cxo<6:0>
	   E2: B0.R21<0>: xo_cxo<0>, B0.R22<7:0>: xo_cxo<8:1>
	 */
	rf_wr(dev, MT_RF(0, 22),
	      min_t(u8, dev->cal.rx.freq_offset, 0xbf));
	val = rf_rr(dev, MT_RF(0, 22));

	/*
	   Reset the DAC (Set B0.R73<7>=1, then set B0.R73<7>=0, and then set B0.R73<7>) during power up.
	 */
	val = rf_rr(dev, MT_RF(0, 73));
	val |= 0x80;
	rf_wr(dev, MT_RF(0, 73), val);
	val &= ~0x80;
	rf_wr(dev, MT_RF(0, 73), val);
	val |= 0x80;
	rf_wr(dev, MT_RF(0, 73), val);

	/*
	   vcocal_en (initiate VCO calibration (reset after completion)) - It should be at the end of RF configuration.
	 */
	rf_set(dev, MT_RF(0, 4), 0x80);
}

void mt76x0_phy_init(struct mt76x02_dev *dev)
{
	INIT_DELAYED_WORK(&dev->cal_work, mt76x0_phy_calibration_work);

	mt76x0_ant_select(dev);
	mt76x0_rf_init(dev);
	mt76x02_phy_set_rxpath(dev);
	mt76x02_phy_set_txdac(dev);
}