Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 | /*
* arch/arm/mach-ixp4xx/fsg-setup.c
*
* FSG board-setup
*
* Copyright (C) 2008 Rod Whitby <rod@whitby.id.au>
*
* based on ixdp425-setup.c:
* Copyright (C) 2003-2004 MontaVista Software, Inc.
* based on nslu2-power.c
* Copyright (C) 2005 Tower Technologies
*
* Author: Rod Whitby <rod@whitby.id.au>
* Maintainers: http://www.nslu2-linux.org/
*
*/
#include <linux/gpio.h>
#include <linux/if_ether.h>
#include <linux/irq.h>
#include <linux/serial.h>
#include <linux/serial_8250.h>
#include <linux/leds.h>
#include <linux/reboot.h>
#include <linux/i2c.h>
#include <linux/i2c-gpio.h>
#include <linux/io.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#define FSG_SDA_PIN 12
#define FSG_SCL_PIN 13
#define FSG_SB_GPIO 4 /* sync button */
#define FSG_RB_GPIO 9 /* reset button */
#define FSG_UB_GPIO 10 /* usb button */
static struct flash_platform_data fsg_flash_data = {
.map_name = "cfi_probe",
.width = 2,
};
static struct resource fsg_flash_resource = {
.flags = IORESOURCE_MEM,
};
static struct platform_device fsg_flash = {
.name = "IXP4XX-Flash",
.id = 0,
.dev = {
.platform_data = &fsg_flash_data,
},
.num_resources = 1,
.resource = &fsg_flash_resource,
};
static struct i2c_gpio_platform_data fsg_i2c_gpio_data = {
.sda_pin = FSG_SDA_PIN,
.scl_pin = FSG_SCL_PIN,
};
static struct platform_device fsg_i2c_gpio = {
.name = "i2c-gpio",
.id = 0,
.dev = {
.platform_data = &fsg_i2c_gpio_data,
},
};
static struct i2c_board_info __initdata fsg_i2c_board_info [] = {
{
I2C_BOARD_INFO("isl1208", 0x6f),
},
};
static struct resource fsg_uart_resources[] = {
{
.start = IXP4XX_UART1_BASE_PHYS,
.end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
.flags = IORESOURCE_MEM,
},
{
.start = IXP4XX_UART2_BASE_PHYS,
.end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
.flags = IORESOURCE_MEM,
}
};
static struct plat_serial8250_port fsg_uart_data[] = {
{
.mapbase = IXP4XX_UART1_BASE_PHYS,
.membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
.irq = IRQ_IXP4XX_UART1,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = IXP4XX_UART_XTAL,
},
{
.mapbase = IXP4XX_UART2_BASE_PHYS,
.membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
.irq = IRQ_IXP4XX_UART2,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = IXP4XX_UART_XTAL,
},
{ }
};
static struct platform_device fsg_uart = {
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM,
.dev = {
.platform_data = fsg_uart_data,
},
.num_resources = ARRAY_SIZE(fsg_uart_resources),
.resource = fsg_uart_resources,
};
static struct platform_device fsg_leds = {
.name = "fsg-led",
.id = -1,
};
/* Built-in 10/100 Ethernet MAC interfaces */
static struct eth_plat_info fsg_plat_eth[] = {
{
.phy = 5,
.rxq = 3,
.txreadyq = 20,
}, {
.phy = 4,
.rxq = 4,
.txreadyq = 21,
}
};
static struct platform_device fsg_eth[] = {
{
.name = "ixp4xx_eth",
.id = IXP4XX_ETH_NPEB,
.dev = {
.platform_data = fsg_plat_eth,
},
}, {
.name = "ixp4xx_eth",
.id = IXP4XX_ETH_NPEC,
.dev = {
.platform_data = fsg_plat_eth + 1,
},
}
};
static struct platform_device *fsg_devices[] __initdata = {
&fsg_i2c_gpio,
&fsg_flash,
&fsg_leds,
&fsg_eth[0],
&fsg_eth[1],
};
static irqreturn_t fsg_power_handler(int irq, void *dev_id)
{
/* Signal init to do the ctrlaltdel action, this will bypass init if
* it hasn't started and do a kernel_restart.
*/
ctrl_alt_del();
return IRQ_HANDLED;
}
static irqreturn_t fsg_reset_handler(int irq, void *dev_id)
{
/* This is the paper-clip reset which does an emergency reboot. */
printk(KERN_INFO "Restarting system.\n");
machine_restart(NULL);
/* This should never be reached. */
return IRQ_HANDLED;
}
static void __init fsg_init(void)
{
uint8_t __iomem *f;
ixp4xx_sys_init();
fsg_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
fsg_flash_resource.end =
IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
/* Configure CS2 for operation, 8bit and writable */
*IXP4XX_EXP_CS2 = 0xbfff0002;
i2c_register_board_info(0, fsg_i2c_board_info,
ARRAY_SIZE(fsg_i2c_board_info));
/* This is only useful on a modified machine, but it is valuable
* to have it first in order to see debug messages, and so that
* it does *not* get removed if platform_add_devices fails!
*/
(void)platform_device_register(&fsg_uart);
platform_add_devices(fsg_devices, ARRAY_SIZE(fsg_devices));
if (request_irq(gpio_to_irq(FSG_RB_GPIO), &fsg_reset_handler,
IRQF_TRIGGER_LOW, "FSG reset button", NULL) < 0) {
printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
gpio_to_irq(FSG_RB_GPIO));
}
if (request_irq(gpio_to_irq(FSG_SB_GPIO), &fsg_power_handler,
IRQF_TRIGGER_LOW, "FSG power button", NULL) < 0) {
printk(KERN_DEBUG "Power Button IRQ %d not available\n",
gpio_to_irq(FSG_SB_GPIO));
}
/*
* Map in a portion of the flash and read the MAC addresses.
* Since it is stored in BE in the flash itself, we need to
* byteswap it if we're in LE mode.
*/
f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x400000);
if (f) {
#ifdef __ARMEB__
int i;
for (i = 0; i < 6; i++) {
fsg_plat_eth[0].hwaddr[i] = readb(f + 0x3C0422 + i);
fsg_plat_eth[1].hwaddr[i] = readb(f + 0x3C043B + i);
}
#else
/*
Endian-swapped reads from unaligned addresses are
required to extract the two MACs from the big-endian
Redboot config area in flash.
*/
fsg_plat_eth[0].hwaddr[0] = readb(f + 0x3C0421);
fsg_plat_eth[0].hwaddr[1] = readb(f + 0x3C0420);
fsg_plat_eth[0].hwaddr[2] = readb(f + 0x3C0427);
fsg_plat_eth[0].hwaddr[3] = readb(f + 0x3C0426);
fsg_plat_eth[0].hwaddr[4] = readb(f + 0x3C0425);
fsg_plat_eth[0].hwaddr[5] = readb(f + 0x3C0424);
fsg_plat_eth[1].hwaddr[0] = readb(f + 0x3C0439);
fsg_plat_eth[1].hwaddr[1] = readb(f + 0x3C043F);
fsg_plat_eth[1].hwaddr[2] = readb(f + 0x3C043E);
fsg_plat_eth[1].hwaddr[3] = readb(f + 0x3C043D);
fsg_plat_eth[1].hwaddr[4] = readb(f + 0x3C043C);
fsg_plat_eth[1].hwaddr[5] = readb(f + 0x3C0443);
#endif
iounmap(f);
}
printk(KERN_INFO "FSG: Using MAC address %pM for port 0\n",
fsg_plat_eth[0].hwaddr);
printk(KERN_INFO "FSG: Using MAC address %pM for port 1\n",
fsg_plat_eth[1].hwaddr);
}
MACHINE_START(FSG, "Freecom FSG-3")
/* Maintainer: www.nslu2-linux.org */
.map_io = ixp4xx_map_io,
.init_early = ixp4xx_init_early,
.init_irq = ixp4xx_init_irq,
.init_time = ixp4xx_timer_init,
.atag_offset = 0x100,
.init_machine = fsg_init,
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
#endif
.restart = ixp4xx_restart,
MACHINE_END
|