Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 | /*
* Copyright (c) 1999-2001 Vojtech Pavlik
*
* Based on the work of:
* James Banks Matthew Dillon
* David Giller Nathan Laredo
* Linus Torvalds Johan Myreen
* Cliff Matthews Philip Blundell
* Russell King
*/
/*
* Logitech Bus Mouse Driver for Linux
*/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* Should you need to contact me, the author, you can do so either by
* e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
* Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
*/
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/input.h>
#include <linux/interrupt.h>
#include <asm/io.h>
#include <asm/irq.h>
MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
MODULE_DESCRIPTION("Logitech busmouse driver");
MODULE_LICENSE("GPL");
#define LOGIBM_BASE 0x23c
#define LOGIBM_EXTENT 4
#define LOGIBM_DATA_PORT LOGIBM_BASE + 0
#define LOGIBM_SIGNATURE_PORT LOGIBM_BASE + 1
#define LOGIBM_CONTROL_PORT LOGIBM_BASE + 2
#define LOGIBM_CONFIG_PORT LOGIBM_BASE + 3
#define LOGIBM_ENABLE_IRQ 0x00
#define LOGIBM_DISABLE_IRQ 0x10
#define LOGIBM_READ_X_LOW 0x80
#define LOGIBM_READ_X_HIGH 0xa0
#define LOGIBM_READ_Y_LOW 0xc0
#define LOGIBM_READ_Y_HIGH 0xe0
#define LOGIBM_DEFAULT_MODE 0x90
#define LOGIBM_CONFIG_BYTE 0x91
#define LOGIBM_SIGNATURE_BYTE 0xa5
#define LOGIBM_IRQ 5
static int logibm_irq = LOGIBM_IRQ;
module_param_hw_named(irq, logibm_irq, uint, irq, 0);
MODULE_PARM_DESC(irq, "IRQ number (5=default)");
static struct input_dev *logibm_dev;
static irqreturn_t logibm_interrupt(int irq, void *dev_id)
{
char dx, dy;
unsigned char buttons;
outb(LOGIBM_READ_X_LOW, LOGIBM_CONTROL_PORT);
dx = (inb(LOGIBM_DATA_PORT) & 0xf);
outb(LOGIBM_READ_X_HIGH, LOGIBM_CONTROL_PORT);
dx |= (inb(LOGIBM_DATA_PORT) & 0xf) << 4;
outb(LOGIBM_READ_Y_LOW, LOGIBM_CONTROL_PORT);
dy = (inb(LOGIBM_DATA_PORT) & 0xf);
outb(LOGIBM_READ_Y_HIGH, LOGIBM_CONTROL_PORT);
buttons = inb(LOGIBM_DATA_PORT);
dy |= (buttons & 0xf) << 4;
buttons = ~buttons >> 5;
input_report_rel(logibm_dev, REL_X, dx);
input_report_rel(logibm_dev, REL_Y, dy);
input_report_key(logibm_dev, BTN_RIGHT, buttons & 1);
input_report_key(logibm_dev, BTN_MIDDLE, buttons & 2);
input_report_key(logibm_dev, BTN_LEFT, buttons & 4);
input_sync(logibm_dev);
outb(LOGIBM_ENABLE_IRQ, LOGIBM_CONTROL_PORT);
return IRQ_HANDLED;
}
static int logibm_open(struct input_dev *dev)
{
if (request_irq(logibm_irq, logibm_interrupt, 0, "logibm", NULL)) {
printk(KERN_ERR "logibm.c: Can't allocate irq %d\n", logibm_irq);
return -EBUSY;
}
outb(LOGIBM_ENABLE_IRQ, LOGIBM_CONTROL_PORT);
return 0;
}
static void logibm_close(struct input_dev *dev)
{
outb(LOGIBM_DISABLE_IRQ, LOGIBM_CONTROL_PORT);
free_irq(logibm_irq, NULL);
}
static int __init logibm_init(void)
{
int err;
if (!request_region(LOGIBM_BASE, LOGIBM_EXTENT, "logibm")) {
printk(KERN_ERR "logibm.c: Can't allocate ports at %#x\n", LOGIBM_BASE);
return -EBUSY;
}
outb(LOGIBM_CONFIG_BYTE, LOGIBM_CONFIG_PORT);
outb(LOGIBM_SIGNATURE_BYTE, LOGIBM_SIGNATURE_PORT);
udelay(100);
if (inb(LOGIBM_SIGNATURE_PORT) != LOGIBM_SIGNATURE_BYTE) {
printk(KERN_INFO "logibm.c: Didn't find Logitech busmouse at %#x\n", LOGIBM_BASE);
err = -ENODEV;
goto err_release_region;
}
outb(LOGIBM_DEFAULT_MODE, LOGIBM_CONFIG_PORT);
outb(LOGIBM_DISABLE_IRQ, LOGIBM_CONTROL_PORT);
logibm_dev = input_allocate_device();
if (!logibm_dev) {
printk(KERN_ERR "logibm.c: Not enough memory for input device\n");
err = -ENOMEM;
goto err_release_region;
}
logibm_dev->name = "Logitech bus mouse";
logibm_dev->phys = "isa023c/input0";
logibm_dev->id.bustype = BUS_ISA;
logibm_dev->id.vendor = 0x0003;
logibm_dev->id.product = 0x0001;
logibm_dev->id.version = 0x0100;
logibm_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL);
logibm_dev->keybit[BIT_WORD(BTN_LEFT)] = BIT_MASK(BTN_LEFT) |
BIT_MASK(BTN_MIDDLE) | BIT_MASK(BTN_RIGHT);
logibm_dev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y);
logibm_dev->open = logibm_open;
logibm_dev->close = logibm_close;
err = input_register_device(logibm_dev);
if (err)
goto err_free_dev;
return 0;
err_free_dev:
input_free_device(logibm_dev);
err_release_region:
release_region(LOGIBM_BASE, LOGIBM_EXTENT);
return err;
}
static void __exit logibm_exit(void)
{
input_unregister_device(logibm_dev);
release_region(LOGIBM_BASE, LOGIBM_EXTENT);
}
module_init(logibm_init);
module_exit(logibm_exit);
|