Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 | /*
* STMicroelectronics st_lsm6dsx FIFO buffer library driver
*
* LSM6DS3/LSM6DS3H/LSM6DSL/LSM6DSM: The FIFO buffer can be configured
* to store data from gyroscope and accelerometer. Samples are queued
* without any tag according to a specific pattern based on 'FIFO data sets'
* (6 bytes each):
* - 1st data set is reserved for gyroscope data
* - 2nd data set is reserved for accelerometer data
* The FIFO pattern changes depending on the ODRs and decimation factors
* assigned to the FIFO data sets. The first sequence of data stored in FIFO
* buffer contains the data of all the enabled FIFO data sets
* (e.g. Gx, Gy, Gz, Ax, Ay, Az), then data are repeated depending on the
* value of the decimation factor and ODR set for each FIFO data set.
* FIFO supported modes:
* - BYPASS: FIFO disabled
* - CONTINUOUS: FIFO enabled. When the buffer is full, the FIFO index
* restarts from the beginning and the oldest sample is overwritten
*
* Copyright 2016 STMicroelectronics Inc.
*
* Lorenzo Bianconi <lorenzo.bianconi@st.com>
* Denis Ciocca <denis.ciocca@st.com>
*
* Licensed under the GPL-2.
*/
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/iio/kfifo_buf.h>
#include <linux/iio/iio.h>
#include <linux/iio/buffer.h>
#include <linux/platform_data/st_sensors_pdata.h>
#include "st_lsm6dsx.h"
#define ST_LSM6DSX_REG_HLACTIVE_ADDR 0x12
#define ST_LSM6DSX_REG_HLACTIVE_MASK BIT(5)
#define ST_LSM6DSX_REG_PP_OD_ADDR 0x12
#define ST_LSM6DSX_REG_PP_OD_MASK BIT(4)
#define ST_LSM6DSX_REG_FIFO_MODE_ADDR 0x0a
#define ST_LSM6DSX_FIFO_MODE_MASK GENMASK(2, 0)
#define ST_LSM6DSX_FIFO_ODR_MASK GENMASK(6, 3)
#define ST_LSM6DSX_FIFO_EMPTY_MASK BIT(12)
#define ST_LSM6DSX_REG_FIFO_OUTL_ADDR 0x3e
#define ST_LSM6DSX_MAX_FIFO_ODR_VAL 0x08
struct st_lsm6dsx_decimator_entry {
u8 decimator;
u8 val;
};
static const
struct st_lsm6dsx_decimator_entry st_lsm6dsx_decimator_table[] = {
{ 0, 0x0 },
{ 1, 0x1 },
{ 2, 0x2 },
{ 3, 0x3 },
{ 4, 0x4 },
{ 8, 0x5 },
{ 16, 0x6 },
{ 32, 0x7 },
};
static int st_lsm6dsx_get_decimator_val(u8 val)
{
const int max_size = ARRAY_SIZE(st_lsm6dsx_decimator_table);
int i;
for (i = 0; i < max_size; i++)
if (st_lsm6dsx_decimator_table[i].decimator == val)
break;
return i == max_size ? 0 : st_lsm6dsx_decimator_table[i].val;
}
static void st_lsm6dsx_get_max_min_odr(struct st_lsm6dsx_hw *hw,
u16 *max_odr, u16 *min_odr)
{
struct st_lsm6dsx_sensor *sensor;
int i;
*max_odr = 0, *min_odr = ~0;
for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) {
sensor = iio_priv(hw->iio_devs[i]);
if (!(hw->enable_mask & BIT(sensor->id)))
continue;
*max_odr = max_t(u16, *max_odr, sensor->odr);
*min_odr = min_t(u16, *min_odr, sensor->odr);
}
}
static int st_lsm6dsx_update_decimators(struct st_lsm6dsx_hw *hw)
{
struct st_lsm6dsx_sensor *sensor;
u16 max_odr, min_odr, sip = 0;
int err, i;
u8 data;
st_lsm6dsx_get_max_min_odr(hw, &max_odr, &min_odr);
for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) {
const struct st_lsm6dsx_reg *dec_reg;
sensor = iio_priv(hw->iio_devs[i]);
/* update fifo decimators and sample in pattern */
if (hw->enable_mask & BIT(sensor->id)) {
sensor->sip = sensor->odr / min_odr;
sensor->decimator = max_odr / sensor->odr;
data = st_lsm6dsx_get_decimator_val(sensor->decimator);
} else {
sensor->sip = 0;
sensor->decimator = 0;
data = 0;
}
dec_reg = &hw->settings->decimator[sensor->id];
if (dec_reg->addr) {
err = st_lsm6dsx_write_with_mask(hw, dec_reg->addr,
dec_reg->mask, data);
if (err < 0)
return err;
}
sip += sensor->sip;
}
hw->sip = sip;
return 0;
}
int st_lsm6dsx_set_fifo_mode(struct st_lsm6dsx_hw *hw,
enum st_lsm6dsx_fifo_mode fifo_mode)
{
int err;
err = st_lsm6dsx_write_with_mask(hw, ST_LSM6DSX_REG_FIFO_MODE_ADDR,
ST_LSM6DSX_FIFO_MODE_MASK, fifo_mode);
if (err < 0)
return err;
hw->fifo_mode = fifo_mode;
return 0;
}
static int st_lsm6dsx_set_fifo_odr(struct st_lsm6dsx_sensor *sensor,
bool enable)
{
struct st_lsm6dsx_hw *hw = sensor->hw;
u8 data;
data = hw->enable_mask ? ST_LSM6DSX_MAX_FIFO_ODR_VAL : 0;
return st_lsm6dsx_write_with_mask(hw, ST_LSM6DSX_REG_FIFO_MODE_ADDR,
ST_LSM6DSX_FIFO_ODR_MASK, data);
}
int st_lsm6dsx_update_watermark(struct st_lsm6dsx_sensor *sensor, u16 watermark)
{
u16 fifo_watermark = ~0, cur_watermark, sip = 0, fifo_th_mask;
struct st_lsm6dsx_hw *hw = sensor->hw;
struct st_lsm6dsx_sensor *cur_sensor;
__le16 wdata;
int i, err;
u8 data;
for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) {
cur_sensor = iio_priv(hw->iio_devs[i]);
if (!(hw->enable_mask & BIT(cur_sensor->id)))
continue;
cur_watermark = (cur_sensor == sensor) ? watermark
: cur_sensor->watermark;
fifo_watermark = min_t(u16, fifo_watermark, cur_watermark);
sip += cur_sensor->sip;
}
if (!sip)
return 0;
fifo_watermark = max_t(u16, fifo_watermark, sip);
fifo_watermark = (fifo_watermark / sip) * sip;
fifo_watermark = fifo_watermark * hw->settings->fifo_ops.th_wl;
mutex_lock(&hw->lock);
err = hw->tf->read(hw->dev, hw->settings->fifo_ops.fifo_th.addr + 1,
sizeof(data), &data);
if (err < 0)
goto out;
fifo_th_mask = hw->settings->fifo_ops.fifo_th.mask;
fifo_watermark = ((data << 8) & ~fifo_th_mask) |
(fifo_watermark & fifo_th_mask);
wdata = cpu_to_le16(fifo_watermark);
err = hw->tf->write(hw->dev, hw->settings->fifo_ops.fifo_th.addr,
sizeof(wdata), (u8 *)&wdata);
out:
mutex_unlock(&hw->lock);
return err < 0 ? err : 0;
}
/**
* st_lsm6dsx_read_fifo() - LSM6DS3-LSM6DS3H-LSM6DSL-LSM6DSM read FIFO routine
* @hw: Pointer to instance of struct st_lsm6dsx_hw.
*
* Read samples from the hw FIFO and push them to IIO buffers.
*
* Return: Number of bytes read from the FIFO
*/
static int st_lsm6dsx_read_fifo(struct st_lsm6dsx_hw *hw)
{
u16 fifo_len, pattern_len = hw->sip * ST_LSM6DSX_SAMPLE_SIZE;
u16 fifo_diff_mask = hw->settings->fifo_ops.fifo_diff.mask;
int err, acc_sip, gyro_sip, read_len, samples, offset;
struct st_lsm6dsx_sensor *acc_sensor, *gyro_sensor;
s64 acc_ts, acc_delta_ts, gyro_ts, gyro_delta_ts;
u8 iio_buff[ALIGN(ST_LSM6DSX_SAMPLE_SIZE, sizeof(s64)) + sizeof(s64)];
u8 buff[pattern_len];
__le16 fifo_status;
err = hw->tf->read(hw->dev, hw->settings->fifo_ops.fifo_diff.addr,
sizeof(fifo_status), (u8 *)&fifo_status);
if (err < 0)
return err;
if (fifo_status & cpu_to_le16(ST_LSM6DSX_FIFO_EMPTY_MASK))
return 0;
fifo_len = (le16_to_cpu(fifo_status) & fifo_diff_mask) *
ST_LSM6DSX_CHAN_SIZE;
samples = fifo_len / ST_LSM6DSX_SAMPLE_SIZE;
fifo_len = (fifo_len / pattern_len) * pattern_len;
/*
* compute delta timestamp between two consecutive samples
* in order to estimate queueing time of data generated
* by the sensor
*/
acc_sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_ACC]);
acc_ts = acc_sensor->ts - acc_sensor->delta_ts;
acc_delta_ts = div_s64(acc_sensor->delta_ts * acc_sensor->decimator,
samples);
gyro_sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_GYRO]);
gyro_ts = gyro_sensor->ts - gyro_sensor->delta_ts;
gyro_delta_ts = div_s64(gyro_sensor->delta_ts * gyro_sensor->decimator,
samples);
for (read_len = 0; read_len < fifo_len; read_len += pattern_len) {
err = hw->tf->read(hw->dev, ST_LSM6DSX_REG_FIFO_OUTL_ADDR,
sizeof(buff), buff);
if (err < 0)
return err;
/*
* Data are written to the FIFO with a specific pattern
* depending on the configured ODRs. The first sequence of data
* stored in FIFO contains the data of all enabled sensors
* (e.g. Gx, Gy, Gz, Ax, Ay, Az), then data are repeated
* depending on the value of the decimation factor set for each
* sensor.
*
* Supposing the FIFO is storing data from gyroscope and
* accelerometer at different ODRs:
* - gyroscope ODR = 208Hz, accelerometer ODR = 104Hz
* Since the gyroscope ODR is twice the accelerometer one, the
* following pattern is repeated every 9 samples:
* - Gx, Gy, Gz, Ax, Ay, Az, Gx, Gy, Gz
*/
gyro_sip = gyro_sensor->sip;
acc_sip = acc_sensor->sip;
offset = 0;
while (acc_sip > 0 || gyro_sip > 0) {
if (gyro_sip-- > 0) {
memcpy(iio_buff, &buff[offset],
ST_LSM6DSX_SAMPLE_SIZE);
iio_push_to_buffers_with_timestamp(
hw->iio_devs[ST_LSM6DSX_ID_GYRO],
iio_buff, gyro_ts);
offset += ST_LSM6DSX_SAMPLE_SIZE;
gyro_ts += gyro_delta_ts;
}
if (acc_sip-- > 0) {
memcpy(iio_buff, &buff[offset],
ST_LSM6DSX_SAMPLE_SIZE);
iio_push_to_buffers_with_timestamp(
hw->iio_devs[ST_LSM6DSX_ID_ACC],
iio_buff, acc_ts);
offset += ST_LSM6DSX_SAMPLE_SIZE;
acc_ts += acc_delta_ts;
}
}
}
return read_len;
}
int st_lsm6dsx_flush_fifo(struct st_lsm6dsx_hw *hw)
{
int err;
mutex_lock(&hw->fifo_lock);
st_lsm6dsx_read_fifo(hw);
err = st_lsm6dsx_set_fifo_mode(hw, ST_LSM6DSX_FIFO_BYPASS);
mutex_unlock(&hw->fifo_lock);
return err;
}
static int st_lsm6dsx_update_fifo(struct iio_dev *iio_dev, bool enable)
{
struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev);
struct st_lsm6dsx_hw *hw = sensor->hw;
int err;
if (hw->fifo_mode != ST_LSM6DSX_FIFO_BYPASS) {
err = st_lsm6dsx_flush_fifo(hw);
if (err < 0)
return err;
}
if (enable) {
err = st_lsm6dsx_sensor_enable(sensor);
if (err < 0)
return err;
} else {
err = st_lsm6dsx_sensor_disable(sensor);
if (err < 0)
return err;
}
err = st_lsm6dsx_set_fifo_odr(sensor, enable);
if (err < 0)
return err;
err = st_lsm6dsx_update_decimators(hw);
if (err < 0)
return err;
err = st_lsm6dsx_update_watermark(sensor, sensor->watermark);
if (err < 0)
return err;
if (hw->enable_mask) {
err = st_lsm6dsx_set_fifo_mode(hw, ST_LSM6DSX_FIFO_CONT);
if (err < 0)
return err;
/*
* store enable buffer timestamp as reference to compute
* first delta timestamp
*/
sensor->ts = iio_get_time_ns(iio_dev);
}
return 0;
}
static irqreturn_t st_lsm6dsx_handler_irq(int irq, void *private)
{
struct st_lsm6dsx_hw *hw = private;
struct st_lsm6dsx_sensor *sensor;
int i;
if (!hw->sip)
return IRQ_NONE;
for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) {
sensor = iio_priv(hw->iio_devs[i]);
if (sensor->sip > 0) {
s64 timestamp;
timestamp = iio_get_time_ns(hw->iio_devs[i]);
sensor->delta_ts = timestamp - sensor->ts;
sensor->ts = timestamp;
}
}
return IRQ_WAKE_THREAD;
}
static irqreturn_t st_lsm6dsx_handler_thread(int irq, void *private)
{
struct st_lsm6dsx_hw *hw = private;
int count;
mutex_lock(&hw->fifo_lock);
count = st_lsm6dsx_read_fifo(hw);
mutex_unlock(&hw->fifo_lock);
return !count ? IRQ_NONE : IRQ_HANDLED;
}
static int st_lsm6dsx_buffer_preenable(struct iio_dev *iio_dev)
{
return st_lsm6dsx_update_fifo(iio_dev, true);
}
static int st_lsm6dsx_buffer_postdisable(struct iio_dev *iio_dev)
{
return st_lsm6dsx_update_fifo(iio_dev, false);
}
static const struct iio_buffer_setup_ops st_lsm6dsx_buffer_ops = {
.preenable = st_lsm6dsx_buffer_preenable,
.postdisable = st_lsm6dsx_buffer_postdisable,
};
int st_lsm6dsx_fifo_setup(struct st_lsm6dsx_hw *hw)
{
struct device_node *np = hw->dev->of_node;
struct st_sensors_platform_data *pdata;
struct iio_buffer *buffer;
unsigned long irq_type;
bool irq_active_low;
int i, err;
irq_type = irqd_get_trigger_type(irq_get_irq_data(hw->irq));
switch (irq_type) {
case IRQF_TRIGGER_HIGH:
case IRQF_TRIGGER_RISING:
irq_active_low = false;
break;
case IRQF_TRIGGER_LOW:
case IRQF_TRIGGER_FALLING:
irq_active_low = true;
break;
default:
dev_info(hw->dev, "mode %lx unsupported\n", irq_type);
return -EINVAL;
}
err = st_lsm6dsx_write_with_mask(hw, ST_LSM6DSX_REG_HLACTIVE_ADDR,
ST_LSM6DSX_REG_HLACTIVE_MASK,
irq_active_low);
if (err < 0)
return err;
pdata = (struct st_sensors_platform_data *)hw->dev->platform_data;
if ((np && of_property_read_bool(np, "drive-open-drain")) ||
(pdata && pdata->open_drain)) {
err = st_lsm6dsx_write_with_mask(hw, ST_LSM6DSX_REG_PP_OD_ADDR,
ST_LSM6DSX_REG_PP_OD_MASK, 1);
if (err < 0)
return err;
irq_type |= IRQF_SHARED;
}
err = devm_request_threaded_irq(hw->dev, hw->irq,
st_lsm6dsx_handler_irq,
st_lsm6dsx_handler_thread,
irq_type | IRQF_ONESHOT,
"lsm6dsx", hw);
if (err) {
dev_err(hw->dev, "failed to request trigger irq %d\n",
hw->irq);
return err;
}
for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) {
buffer = devm_iio_kfifo_allocate(hw->dev);
if (!buffer)
return -ENOMEM;
iio_device_attach_buffer(hw->iio_devs[i], buffer);
hw->iio_devs[i]->modes |= INDIO_BUFFER_SOFTWARE;
hw->iio_devs[i]->setup_ops = &st_lsm6dsx_buffer_ops;
}
return 0;
}
|