Linux Audio

Check our new training course

Embedded Linux Audio

Check our new training course
with Creative Commons CC-BY-SA
lecture materials

Bootlin logo

Elixir Cross Referencer

Loading...
/*
 * Safe Encapsulated USB Serial Driver
 *
 *      Copyright (C) 2010 Johan Hovold <jhovold@gmail.com>
 *      Copyright (C) 2001 Lineo
 *      Copyright (C) 2001 Hewlett-Packard
 *
 *	This program is free software; you can redistribute it and/or modify
 *	it under the terms of the GNU General Public License as published by
 *	the Free Software Foundation; either version 2 of the License, or
 *	(at your option) any later version.
 *
 * By:
 *      Stuart Lynne <sl@lineo.com>, Tom Rushworth <tbr@lineo.com>
 */

/*
 * The encapsultaion is designed to overcome difficulties with some USB
 * hardware.
 *
 * While the USB protocol has a CRC over the data while in transit, i.e. while
 * being carried over the bus, there is no end to end protection. If the
 * hardware has any problems getting the data into or out of the USB transmit
 * and receive FIFO's then data can be lost.
 *
 * This protocol adds a two byte trailer to each USB packet to specify the
 * number of bytes of valid data and a 10 bit CRC that will allow the receiver
 * to verify that the entire USB packet was received without error.
 *
 * Because in this case the sender and receiver are the class and function
 * drivers there is now end to end protection.
 *
 * There is an additional option that can be used to force all transmitted
 * packets to be padded to the maximum packet size. This provides a work
 * around for some devices which have problems with small USB packets.
 *
 * Assuming a packetsize of N:
 *
 *      0..N-2  data and optional padding
 *
 *      N-2     bits 7-2 - number of bytes of valid data
 *              bits 1-0 top two bits of 10 bit CRC
 *      N-1     bottom 8 bits of 10 bit CRC
 *
 *
 *      | Data Length       | 10 bit CRC                                |
 *      + 7 . 6 . 5 . 4 . 3 . 2 . 1 . 0 | 7 . 6 . 5 . 4 . 3 . 2 . 1 . 0 +
 *
 * The 10 bit CRC is computed across the sent data, followed by the trailer
 * with the length set and the CRC set to zero. The CRC is then OR'd into
 * the trailer.
 *
 * When received a 10 bit CRC is computed over the entire frame including
 * the trailer and should be equal to zero.
 *
 * Two module parameters are used to control the encapsulation, if both are
 * turned of the module works as a simple serial device with NO
 * encapsulation.
 *
 * See linux/drivers/usbd/serial_fd for a device function driver
 * implementation of this.
 *
 */

#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/gfp.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/uaccess.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>

static bool safe = true;
static bool padded = IS_ENABLED(CONFIG_USB_SERIAL_SAFE_PADDED);

#define DRIVER_AUTHOR "sl@lineo.com, tbr@lineo.com, Johan Hovold <jhovold@gmail.com>"
#define DRIVER_DESC "USB Safe Encapsulated Serial"

MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");

module_param(safe, bool, 0);
MODULE_PARM_DESC(safe, "Turn Safe Encapsulation On/Off");

module_param(padded, bool, 0);
MODULE_PARM_DESC(padded, "Pad to full wMaxPacketSize On/Off");

#define CDC_DEVICE_CLASS                        0x02

#define CDC_INTERFACE_CLASS                     0x02
#define CDC_INTERFACE_SUBCLASS                  0x06

#define LINEO_INTERFACE_CLASS                   0xff

#define LINEO_INTERFACE_SUBCLASS_SAFENET        0x01
#define LINEO_SAFENET_CRC                       0x01
#define LINEO_SAFENET_CRC_PADDED                0x02

#define LINEO_INTERFACE_SUBCLASS_SAFESERIAL     0x02
#define LINEO_SAFESERIAL_CRC                    0x01
#define LINEO_SAFESERIAL_CRC_PADDED             0x02


#define MY_USB_DEVICE(vend, prod, dc, ic, isc) \
	.match_flags = USB_DEVICE_ID_MATCH_DEVICE | \
		       USB_DEVICE_ID_MATCH_DEV_CLASS | \
		       USB_DEVICE_ID_MATCH_INT_CLASS | \
		       USB_DEVICE_ID_MATCH_INT_SUBCLASS, \
	.idVendor = (vend), \
	.idProduct = (prod),\
	.bDeviceClass = (dc),\
	.bInterfaceClass = (ic), \
	.bInterfaceSubClass = (isc),

static const struct usb_device_id id_table[] = {
	{MY_USB_DEVICE(0x49f, 0xffff, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},	/* Itsy */
	{MY_USB_DEVICE(0x3f0, 0x2101, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},	/* Calypso */
	{MY_USB_DEVICE(0x4dd, 0x8001, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},	/* Iris */
	{MY_USB_DEVICE(0x4dd, 0x8002, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},	/* Collie */
	{MY_USB_DEVICE(0x4dd, 0x8003, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},	/* Collie */
	{MY_USB_DEVICE(0x4dd, 0x8004, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},	/* Collie */
	{MY_USB_DEVICE(0x5f9, 0xffff, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},	/* Sharp tmp */
	{}			/* terminating entry  */
};

MODULE_DEVICE_TABLE(usb, id_table);

static const __u16 crc10_table[256] = {
	0x000, 0x233, 0x255, 0x066, 0x299, 0x0aa, 0x0cc, 0x2ff,
	0x301, 0x132, 0x154, 0x367, 0x198, 0x3ab, 0x3cd, 0x1fe,
	0x031, 0x202, 0x264, 0x057, 0x2a8, 0x09b, 0x0fd, 0x2ce,
	0x330, 0x103, 0x165, 0x356, 0x1a9, 0x39a, 0x3fc, 0x1cf,
	0x062, 0x251, 0x237, 0x004, 0x2fb, 0x0c8, 0x0ae, 0x29d,
	0x363, 0x150, 0x136, 0x305, 0x1fa, 0x3c9, 0x3af, 0x19c,
	0x053, 0x260, 0x206, 0x035, 0x2ca, 0x0f9, 0x09f, 0x2ac,
	0x352, 0x161, 0x107, 0x334, 0x1cb, 0x3f8, 0x39e, 0x1ad,
	0x0c4, 0x2f7, 0x291, 0x0a2, 0x25d, 0x06e, 0x008, 0x23b,
	0x3c5, 0x1f6, 0x190, 0x3a3, 0x15c, 0x36f, 0x309, 0x13a,
	0x0f5, 0x2c6, 0x2a0, 0x093, 0x26c, 0x05f, 0x039, 0x20a,
	0x3f4, 0x1c7, 0x1a1, 0x392, 0x16d, 0x35e, 0x338, 0x10b,
	0x0a6, 0x295, 0x2f3, 0x0c0, 0x23f, 0x00c, 0x06a, 0x259,
	0x3a7, 0x194, 0x1f2, 0x3c1, 0x13e, 0x30d, 0x36b, 0x158,
	0x097, 0x2a4, 0x2c2, 0x0f1, 0x20e, 0x03d, 0x05b, 0x268,
	0x396, 0x1a5, 0x1c3, 0x3f0, 0x10f, 0x33c, 0x35a, 0x169,
	0x188, 0x3bb, 0x3dd, 0x1ee, 0x311, 0x122, 0x144, 0x377,
	0x289, 0x0ba, 0x0dc, 0x2ef, 0x010, 0x223, 0x245, 0x076,
	0x1b9, 0x38a, 0x3ec, 0x1df, 0x320, 0x113, 0x175, 0x346,
	0x2b8, 0x08b, 0x0ed, 0x2de, 0x021, 0x212, 0x274, 0x047,
	0x1ea, 0x3d9, 0x3bf, 0x18c, 0x373, 0x140, 0x126, 0x315,
	0x2eb, 0x0d8, 0x0be, 0x28d, 0x072, 0x241, 0x227, 0x014,
	0x1db, 0x3e8, 0x38e, 0x1bd, 0x342, 0x171, 0x117, 0x324,
	0x2da, 0x0e9, 0x08f, 0x2bc, 0x043, 0x270, 0x216, 0x025,
	0x14c, 0x37f, 0x319, 0x12a, 0x3d5, 0x1e6, 0x180, 0x3b3,
	0x24d, 0x07e, 0x018, 0x22b, 0x0d4, 0x2e7, 0x281, 0x0b2,
	0x17d, 0x34e, 0x328, 0x11b, 0x3e4, 0x1d7, 0x1b1, 0x382,
	0x27c, 0x04f, 0x029, 0x21a, 0x0e5, 0x2d6, 0x2b0, 0x083,
	0x12e, 0x31d, 0x37b, 0x148, 0x3b7, 0x184, 0x1e2, 0x3d1,
	0x22f, 0x01c, 0x07a, 0x249, 0x0b6, 0x285, 0x2e3, 0x0d0,
	0x11f, 0x32c, 0x34a, 0x179, 0x386, 0x1b5, 0x1d3, 0x3e0,
	0x21e, 0x02d, 0x04b, 0x278, 0x087, 0x2b4, 0x2d2, 0x0e1,
};

#define CRC10_INITFCS     0x000	/* Initial FCS value */
#define CRC10_GOODFCS     0x000	/* Good final FCS value */
#define CRC10_FCS(fcs, c) ((((fcs) << 8) & 0x3ff) ^ crc10_table[((fcs) >> 2) & 0xff] ^ (c))

/**
 * fcs_compute10 - memcpy and calculate 10 bit CRC across buffer
 * @sp: pointer to buffer
 * @len: number of bytes
 * @fcs: starting FCS
 *
 * Perform a memcpy and calculate fcs using ppp 10bit CRC algorithm. Return
 * new 10 bit FCS.
 */
static inline __u16 fcs_compute10(unsigned char *sp, int len, __u16 fcs)
{
	for (; len-- > 0; fcs = CRC10_FCS(fcs, *sp++));
	return fcs;
}

static void safe_process_read_urb(struct urb *urb)
{
	struct usb_serial_port *port = urb->context;
	unsigned char *data = urb->transfer_buffer;
	unsigned char length = urb->actual_length;
	int actual_length;
	__u16 fcs;

	if (!length)
		return;

	if (!safe)
		goto out;

	if (length < 2) {
		dev_err(&port->dev, "malformed packet\n");
		return;
	}

	fcs = fcs_compute10(data, length, CRC10_INITFCS);
	if (fcs) {
		dev_err(&port->dev, "%s - bad CRC %x\n", __func__, fcs);
		return;
	}

	actual_length = data[length - 2] >> 2;
	if (actual_length > (length - 2)) {
		dev_err(&port->dev, "%s - inconsistent lengths %d:%d\n",
				__func__, actual_length, length);
		return;
	}
	dev_info(&urb->dev->dev, "%s - actual: %d\n", __func__, actual_length);
	length = actual_length;
out:
	tty_insert_flip_string(&port->port, data, length);
	tty_flip_buffer_push(&port->port);
}

static int safe_prepare_write_buffer(struct usb_serial_port *port,
						void *dest, size_t size)
{
	unsigned char *buf = dest;
	int count;
	int trailer_len;
	int pkt_len;
	__u16 fcs;

	trailer_len = safe ? 2 : 0;

	count = kfifo_out_locked(&port->write_fifo, buf, size - trailer_len,
								&port->lock);
	if (!safe)
		return count;

	/* pad if necessary */
	if (padded) {
		pkt_len = size;
		memset(buf + count, '0', pkt_len - count - trailer_len);
	} else {
		pkt_len = count + trailer_len;
	}

	/* set count */
	buf[pkt_len - 2] = count << 2;
	buf[pkt_len - 1] = 0;

	/* compute fcs and insert into trailer */
	fcs = fcs_compute10(buf, pkt_len, CRC10_INITFCS);
	buf[pkt_len - 2] |= fcs >> 8;
	buf[pkt_len - 1] |= fcs & 0xff;

	return pkt_len;
}

static int safe_startup(struct usb_serial *serial)
{
	struct usb_interface_descriptor	*desc;

	if (serial->dev->descriptor.bDeviceClass != CDC_DEVICE_CLASS)
		return -ENODEV;

	desc = &serial->interface->cur_altsetting->desc;

	if (desc->bInterfaceClass != LINEO_INTERFACE_CLASS)
		return -ENODEV;
	if (desc->bInterfaceSubClass != LINEO_INTERFACE_SUBCLASS_SAFESERIAL)
		return -ENODEV;

	switch (desc->bInterfaceProtocol) {
	case LINEO_SAFESERIAL_CRC:
		break;
	case LINEO_SAFESERIAL_CRC_PADDED:
		padded = true;
		break;
	default:
		return -EINVAL;
	}
	return 0;
}

static struct usb_serial_driver safe_device = {
	.driver = {
		.owner =	THIS_MODULE,
		.name =		"safe_serial",
	},
	.id_table =		id_table,
	.num_ports =		1,
	.process_read_urb =	safe_process_read_urb,
	.prepare_write_buffer =	safe_prepare_write_buffer,
	.attach =		safe_startup,
};

static struct usb_serial_driver * const serial_drivers[] = {
	&safe_device, NULL
};

module_usb_serial_driver(serial_drivers, id_table);